Compare commits
1
Commits
| Author | SHA1 | Date | |
|---|---|---|---|
 YikaiFu-cart
|
f173e37f35 |
@@ -288,7 +288,7 @@ test: 添加 xxx 测试
|
|||||||
|
|
||||||
## 项目专属规则
|
## 项目专属规则
|
||||||
|
|
||||||
* 本项目面向 Ubuntu 22.04 和 ROS2 Humble；编译前必须先切换到工作空间根目录 `/home/robot/WS_xr`，并执行 `source /opt/ros/humble/setup.bash`。禁止在 `/home/robot/WS_xr/src` 中运行 `colcon build`，否则会在源码目录生成多余的 `build/`、`install/` 和 `log/`；测试和运行命令也应在工作空间根目录执行。
|
* 本项目面向 Ubuntu 22.04 和 ROS2 Humble；构建、测试和运行命令应在工作空间根目录 `/home/robot/WS_xr` 执行，并先 `source /opt/ros/humble/setup.bash`。
|
||||||
* 工作空间包含 `xr_rm_input`、`xr_rm_teleop` 两个 `ament_python` 包，以及 `xr_rm_interfaces`、`xr_rm_bringup` 两个 `ament_cmake` 包；优先使用现有 ROS2 包、节点和消息，不要另建重复入口。
|
* 工作空间包含 `xr_rm_input`、`xr_rm_teleop` 两个 `ament_python` 包，以及 `xr_rm_interfaces`、`xr_rm_bringup` 两个 `ament_cmake` 包；优先使用现有 ROS2 包、节点和消息，不要另建重复入口。
|
||||||
* 修改 ROS 节点、launch、消息定义或安装配置后，至少运行 `colcon build --symlink-install`；涉及遥操作姿态控制时，再运行 `pytest src/xr_rm_teleop/test/test_orientation_control.py`。
|
* 修改 ROS 节点、launch、消息定义或安装配置后，至少运行 `colcon build --symlink-install`；涉及遥操作姿态控制时，再运行 `pytest src/xr_rm_teleop/test/test_orientation_control.py`。
|
||||||
* 遥操作统一使用 `xr_rm_bringup/launch/arm_debug.launch.py`；调试和验证默认使用 `use_mock:=true`，未经用户明确要求不得连接真机、移动机械臂或操作夹爪。
|
* 遥操作统一使用 `xr_rm_bringup/launch/arm_debug.launch.py`；调试和验证默认使用 `use_mock:=true`，未经用户明确要求不得连接真机、移动机械臂或操作夹爪。
|
||||||
|
|||||||
@@ -1,97 +1,44 @@
|
|||||||
# XR-RM75 双臂遥操作工作空间
|
# XR-RM75 双臂遥操作
|
||||||
|
|
||||||
本仓库是面向 **Ubuntu 22.04 + ROS2 Humble + PICO 4 Ultra + 睿尔曼 RM75** 的阶段一 XR 双臂遥操作项目。当前目标是先跑通一条低速、安全、可调试的闭环：
|
基于 **Ubuntu 22.04、ROS2 Humble、PICO 4 Ultra 和睿尔曼 RM75** 的双臂 XR 遥操作
|
||||||
|
工作空间，支持单臂/双臂 Mock 与真机控制，以及 MuJoCo 运动学显示。
|
||||||
|
|
||||||
|
> [!WARNING]
|
||||||
|
> 真机命令会连接并控制机械臂。首次运行必须从 Mock 和单臂低速验证开始，确保急停
|
||||||
|
> 可用且工作区无人。当前项目没有双臂碰撞检测或避障。
|
||||||
|
|
||||||
|
## 当前能力
|
||||||
|
|
||||||
|
- PICO/XR 双手柄 UDP 输入，相对位姿目标与 Placo QP 七关节控制。
|
||||||
|
- 单臂/双臂 Mock 与真机、手柄/话题夹爪控制，以及只读 MuJoCo 双臂显示。
|
||||||
|
- 工作空间/圆柱限位、速度限制、指令超时和安全慢停。
|
||||||
|
- 统一 launch、Tkinter 启动面板、调试话题和 Mock 输入工具。
|
||||||
|
|
||||||
|
尚未完成：D405/D435 视频流、数据记录、相机标定、目标检测、双臂碰撞避障、任务级状态机，以及 PICO 与 ROS 的完整时间同步和状态回传。
|
||||||
|
|
||||||
|
## 系统架构
|
||||||
|
|
||||||
```text
|
```text
|
||||||
PICO/XR 双手柄 UDP JSON
|
PICO / XRoboToolkit
|
||||||
|
-> UDP JSON
|
||||||
-> xr_rm_input/udp_controller_receiver
|
-> xr_rm_input/udp_controller_receiver
|
||||||
-> /xr/left_controller 与 /xr/right_controller
|
-> /xr/left_controller、/xr/right_controller
|
||||||
-> xr_rm_teleop/single_arm_velocity_teleop
|
-> xr_rm_teleop/single_arm_velocity_teleop
|
||||||
-> Placo QP 单步逆解
|
-> 相对 TCP 目标 + Placo QP
|
||||||
-> 左右 RM75 七关节角透传控制
|
-> Mock 或 RM75 rm_movej_canfd
|
||||||
-> /xr_rm/<arm_name>/joint_states
|
-> joint_states / 调试话题
|
||||||
-> 可选 xr_rm_mujoco/dual_arm_simulator
|
-> 可选 xr_rm_mujoco/dual_arm_simulator
|
||||||
-> /xr_rm/<arm_name>/current_pose、raw_target_pose、target_pose、cmd_vel、target_clamped 调试话题
|
|
||||||
```
|
```
|
||||||
|
|
||||||
当前控制方式是“手柄相对位姿 + 单步 QP”遥操作：按住 `grip` 时锁定当前手柄位姿和机械臂 TCP 位姿，之后根据手柄相对位移和相对旋转生成目标 TCP。姿态目标使用旋转矩阵和 SO(3) 最短路径完成死区、滤波与限速，不经过 RPY。每个控制周期执行一次 Placo QP，并通过 `rm_movej_canfd` 下发 7 个关节目标。松开 `grip`、UDP 或关节反馈超时、节点退出时会请求机械臂慢停。
|
工作空间包含五个 ROS2 包：`xr_rm_input` 负责手柄输入，`xr_rm_interfaces` 定义消息，
|
||||||
|
`xr_rm_teleop` 实现遥操作与真机适配，`xr_rm_bringup` 提供启动和配置，
|
||||||
|
`xr_rm_mujoco` 负责只读运动学显示。
|
||||||
|
|
||||||
## 当前范围
|
`single_arm_velocity_teleop` 每个实例只控制一台机械臂；双臂模式分别启动 `left_arm_teleop` 和 `right_arm_teleop`。
|
||||||
|
|
||||||
已完成：
|
## 环境与构建
|
||||||
|
|
||||||
- PICO/XR 手柄 UDP 数据接收，并分发到左右手柄 ROS2 话题。
|
在工作空间根目录执行：
|
||||||
- 通过统一的 `arm_debug.launch.py` 支持左臂、右臂、双臂的 mock 调试和真机调试。
|
|
||||||
- 使用现有双臂 URDF 的 MuJoCo 运动学显示，可由 Mock 或真机反馈同步双臂姿态。
|
|
||||||
- RM75 真机连接适配，包含关节反馈缓存、`rm_movej_canfd` 关节透传、安全速度/加速度配置、可选初始化点位移动。
|
|
||||||
- Placo 0.9.4 RM75 QP 逆解；收到首帧有效关节反馈后才启用，求解失败时保留上一组有效关节目标。
|
|
||||||
- 真机模式下，点击对应手柄 `trigger` 可切换并保持对应夹爪开/关状态。
|
|
||||||
- Tkinter 启动面板 `launcher_ui.py`，用于现场快速启动、监控 topic、检查环境和清理进程。
|
|
||||||
- XRoboToolkit bridge 读取左右手柄 pose、Grip、Trigger、摇杆和主副按键。
|
|
||||||
|
|
||||||
暂未完成：
|
|
||||||
|
|
||||||
- D405/D435 视频流、数据记录、相机标定和目标检测链路。
|
|
||||||
- 双臂碰撞模型、任务级状态机、自动采摘策略。
|
|
||||||
- PICO 端与 ROS 端的完整时间同步和状态回传。
|
|
||||||
|
|
||||||
## 项目结构
|
|
||||||
|
|
||||||
```text
|
|
||||||
src/
|
|
||||||
├── README.md # 项目主文档
|
|
||||||
├── AGENTS.md # Codex 项目工作流和安全规则
|
|
||||||
├── docs/superpowers/ # Superpowers 设计与实施计划
|
|
||||||
├── xr_rm_bringup/
|
|
||||||
│ ├── config/
|
|
||||||
│ │ ├── dual_arm_mujoco.yaml # MuJoCo 显示刷新参数
|
|
||||||
│ │ ├── dual_arm_rm75.yaml # 双臂配置：left_arm_teleop 与 right_arm_teleop
|
|
||||||
│ │ ├── left_arm_rm75.yaml # 左臂单独调试配置
|
|
||||||
│ │ ├── right_arm_rm75.yaml # 右臂单独调试配置
|
|
||||||
│ │ └── peripherals_rm75.yaml # 左右臂末端外设配置
|
|
||||||
│ ├── launch/
|
|
||||||
│ │ └── arm_debug.launch.py # 统一入口：单臂/双臂、Mock/真机、可选 MuJoCo
|
|
||||||
│ └── tools/
|
|
||||||
│ ├── launcher_ui.py # 图形化调试启动面板
|
|
||||||
│ └── realman_dual_arm_state_monitor.py
|
|
||||||
├── xr_rm_input/
|
|
||||||
│ ├── launch/
|
|
||||||
│ │ └── udp_receiver.launch.py # 低层 UDP 接收测试入口
|
|
||||||
│ ├── test/
|
|
||||||
│ │ └── test_controller_fields.py
|
|
||||||
│ └── xr_rm_input/
|
|
||||||
│ ├── udp_controller_receiver.py
|
|
||||||
│ ├── xrobotoolkit_to_udp_bridge.py
|
|
||||||
│ └── sample_udp_sender.py # 本机扫轴/正弦模拟手柄 UDP 数据
|
|
||||||
├── xr_rm_interfaces/
|
|
||||||
│ └── msg/
|
|
||||||
│ └── XrController.msg # 手柄状态与位姿
|
|
||||||
├── xr_rm_mujoco/
|
|
||||||
│ └── xr_rm_mujoco/
|
|
||||||
│ └── dual_arm_simulator.py # 双臂 URDF 运动学映射与 MuJoCo viewer
|
|
||||||
└── xr_rm_teleop/
|
|
||||||
├── models/
|
|
||||||
│ ├── rm75/ # 旧 RM75 模型资源（launch 不再选用）
|
|
||||||
│ ├── rm75_omnipicker/ # 旧单臂 OmniPicker 模型资源
|
|
||||||
│ └── dual_rm75/ # 当前左右臂统一使用的双 RM75 URDF 与网格
|
|
||||||
└── xr_rm_teleop/
|
|
||||||
├── placo_ik_solver.py # Placo 0.9.4 单步 QP 逆解
|
|
||||||
├── single_arm_velocity_teleop.py
|
|
||||||
├── realman_adapter.py
|
|
||||||
└── fun_peripheral.py
|
|
||||||
```
|
|
||||||
|
|
||||||
`single_arm_velocity_teleop` 这个名字保留是有意的：双臂模式不是一个大节点直接控制两台机械臂，而是启动两个相同的单臂控制节点，分别命名为 `left_arm_teleop` 和 `right_arm_teleop`。
|
|
||||||
|
|
||||||
## Superpowers Git 约束
|
|
||||||
|
|
||||||
使用 Superpowers 执行任务时，只允许按 skill 工作流创建本地 Git 提交。
|
|
||||||
禁止执行 `git push`、合并本地分支、合并 PR 或其他远程写操作。skill 如需
|
|
||||||
独立 worktree 或配套本地分支，可以创建，但不得将其合并到其他分支。
|
|
||||||
|
|
||||||
## 环境准备
|
|
||||||
|
|
||||||
在工作空间根目录，也就是包含 `src/` 的目录执行：
|
|
||||||
|
|
||||||
```bash
|
```bash
|
||||||
cd /home/robot/WS_xr
|
cd /home/robot/WS_xr
|
||||||
@@ -102,440 +49,125 @@ colcon build --symlink-install
|
|||||||
source install/setup.bash
|
source install/setup.bash
|
||||||
```
|
```
|
||||||
|
|
||||||
真机模式还需要安装睿尔曼 Python API2。若未安装，mock 模式仍可正常使用；真机启动时会提示缺少 `Robotic_Arm` 包。
|
遥操作和 MuJoCo 节点固定使用 `/home/robot/miniconda3/envs/xr/bin/python`，
|
||||||
|
其中固定 Placo 0.9.4、Pinocchio 3.7.0、NumPy 2.2.6 和 MuJoCo 3.10.0；不要从
|
||||||
|
用户或系统 Python 覆盖这些版本。
|
||||||
|
|
||||||
遥操作和 MuJoCo 节点固定由 `/home/robot/miniconda3/envs/xr/bin/python` 启动，并复用其中的 Python 3.10、Placo 0.9.4、Pinocchio 3.7.0、NumPy 2.2.6 和 MuJoCo 3.10.0。`ros2`、`colcon`、pytest 和 `udp_controller_receiver` 仍使用系统 Python。禁止通过 `pip --user`、`sudo pip` 或系统安装升级 Placo、Pinocchio、EigenPy 和 NumPy。
|
真机模式另需睿尔曼 Python API2；Mock 模式不依赖厂商 SDK。
|
||||||
|
|
||||||
只读检查 Placo 版本：
|
## 快速开始
|
||||||
|
|
||||||
|
以下命令均在 `/home/robot/WS_xr` 执行，并先 source ROS2 与 `install/setup.bash`。
|
||||||
|
|
||||||
|
### Mock
|
||||||
|
|
||||||
```bash
|
```bash
|
||||||
/home/robot/miniconda3/envs/xr/bin/python -c \
|
ros2 launch xr_rm_bringup arm_debug.launch.py arm:=both use_mock:=true
|
||||||
"import importlib.metadata; print(importlib.metadata.version('placo'))"
|
|
||||||
```
|
```
|
||||||
|
|
||||||
输出必须为 `0.9.4`。
|
另开终端发送模拟手柄数据：
|
||||||
|
|
||||||
同时检查 MuJoCo：
|
|
||||||
|
|
||||||
```bash
|
```bash
|
||||||
/home/robot/miniconda3/envs/xr/bin/python -c \
|
ros2 run xr_rm_input sample_udp_sender \
|
||||||
"import mujoco; print(mujoco.__version__)"
|
--hand both --host 127.0.0.1 --port 15000 \
|
||||||
```
|
|
||||||
|
|
||||||
当前验证版本为 `3.10.0`。系统 pytest 会通过 `xr_rm_mujoco/test/conftest.py` 复用该固定 XR 环境中的 MuJoCo，因此新包可直接按 ROS2 标准方式测试：
|
|
||||||
|
|
||||||
```bash
|
|
||||||
colcon test --packages-select xr_rm_mujoco --event-handlers console_direct+
|
|
||||||
colcon test-result --verbose
|
|
||||||
```
|
|
||||||
|
|
||||||
如果希望 `launcher_ui.py` 从任意目录找到工作空间，可以设置：
|
|
||||||
|
|
||||||
```bash
|
|
||||||
export XR_RM_WS=/home/robot/WS_xr
|
|
||||||
```
|
|
||||||
|
|
||||||
## 使用 launcher_ui.py 调试
|
|
||||||
|
|
||||||
推荐现场调试优先使用图形化启动面板。它会自动进入工作空间、source ROS2 与 `install/setup.bash`，并把每个命令放到独立终端中运行。
|
|
||||||
|
|
||||||
源码方式启动：
|
|
||||||
|
|
||||||
```bash
|
|
||||||
cd /home/robot/WS_xr
|
|
||||||
python3 src/xr_rm_bringup/tools/launcher_ui.py
|
|
||||||
```
|
|
||||||
|
|
||||||
构建后也可以通过 ROS2 入口启动：
|
|
||||||
|
|
||||||
```bash
|
|
||||||
source /opt/ros/humble/setup.bash
|
|
||||||
source install/setup.bash
|
|
||||||
ros2 run xr_rm_bringup launcher_ui
|
|
||||||
```
|
|
||||||
|
|
||||||
面板顶部的 `Mode` 分为四类：
|
|
||||||
|
|
||||||
- `Simulation`：双臂 mock、XRoboToolkit bridge、双手 sample UDP 和 controller 频率监控。
|
|
||||||
- `MuJoCo`：双臂 Mock/真机 MuJoCo launch、XRoboToolkit bridge 和 controller 频率监控；真机命令会连接两台 RM75。
|
|
||||||
- `Real Hardware`：左右臂网络 ping、左臂/右臂/双臂真机 launch、XRoboToolkit bridge 和左右夹爪开合。
|
|
||||||
- `Diagnostics`：`ros2 doctor --report`、四个核心包的 `ros2 pkg prefix`、controller 位置/频率监控。
|
|
||||||
|
|
||||||
常用按钮：
|
|
||||||
|
|
||||||
- `Run Selected`：运行当前选中的命令。双击列表项也可以运行。
|
|
||||||
- `Check Env`：检查 ROS2 Humble、工作空间 build、终端、四个核心 ROS 包、睿尔曼 API2。
|
|
||||||
- `Stop All`：结束由本工作空间启动的 launch、sample sender、topic monitor、MuJoCo viewer、相关 ROS 节点和终端窗口。
|
|
||||||
|
|
||||||
`Stop All` 会保留现有 PC Service；点击启动器窗口 `X` 并确认退出时会额外停止 PC Service。两条清理路径都会停止 `dual_arm_simulator`，关闭 MuJoCo viewer。
|
|
||||||
|
|
||||||
每个模式都会附带基础监控入口：
|
|
||||||
|
|
||||||
- `Open Controller Topic Monitor`：同时查看 `/xr/left_controller` 和 `/xr/right_controller`。
|
|
||||||
- `Open ROS Topic/Node List Monitor`：每秒刷新 `ros2 topic list` 和 `ros2 node list`。
|
|
||||||
|
|
||||||
`Simulation` 和 `MuJoCo` 模式还提供 `Open Controller Hz Monitor`；`Diagnostics` 同时提供 controller 位置与频率监控。
|
|
||||||
|
|
||||||
分屏监控依赖 `x-terminal-emulator` 指向 Terminator。若提示不支持，可安装并切换：
|
|
||||||
|
|
||||||
```bash
|
|
||||||
sudo apt install terminator wmctrl xdotool
|
|
||||||
sudo update-alternatives --config x-terminal-emulator
|
|
||||||
```
|
|
||||||
|
|
||||||
## 推荐调试顺序
|
|
||||||
|
|
||||||
第一步：检查环境。
|
|
||||||
|
|
||||||
打开 `launcher_ui.py`，点击 `Check Env`。如果 `install/setup.bash` 缺失，先回工作空间根目录重新执行 `colcon build --symlink-install`。
|
|
||||||
|
|
||||||
第二步：分别跑左、右臂 mock 闭环。
|
|
||||||
|
|
||||||
分两个终端依次验证左臂：
|
|
||||||
|
|
||||||
```bash
|
|
||||||
ros2 launch xr_rm_bringup arm_debug.launch.py arm:=left use_mock:=true
|
|
||||||
ros2 run xr_rm_input sample_udp_sender --hand left --host 127.0.0.1 --port 15000 \
|
|
||||||
--pattern axis_sweep --seconds 30
|
--pattern axis_sweep --seconds 30
|
||||||
```
|
```
|
||||||
|
|
||||||
停止左臂进程后，再分别验证右臂：
|
单臂调试时将 `arm` 改为 `left` 或 `right`。推荐先分别完成左右单臂
|
||||||
|
Mock，再进入双臂或真机验证。
|
||||||
|
|
||||||
```bash
|
### MuJoCo
|
||||||
ros2 launch xr_rm_bringup arm_debug.launch.py arm:=right use_mock:=true
|
|
||||||
ros2 run xr_rm_input sample_udp_sender --hand right --host 127.0.0.1 --port 15000 \
|
|
||||||
--pattern axis_sweep --seconds 30
|
|
||||||
```
|
|
||||||
|
|
||||||
`sample_udp_sender` 默认使用 `axis_sweep` 扫轴轨迹，并在终端打印 `XR +X/-X/+Y/-Y/+Z/-Z` 标签。需要检查末端姿态时可增加 `--rotation-pattern rpy_steps --rotation-amplitude-deg 25`。
|
|
||||||
|
|
||||||
观察：
|
|
||||||
|
|
||||||
```bash
|
|
||||||
ros2 topic echo /xr/left_controller
|
|
||||||
ros2 topic echo /xr/right_controller
|
|
||||||
ros2 topic echo /xr_rm/left_rm75/target_pose
|
|
||||||
ros2 topic echo /xr_rm/right_rm75/target_pose
|
|
||||||
ros2 topic echo /xr_rm/left_rm75/cmd_vel
|
|
||||||
ros2 topic echo /xr_rm/right_rm75/cmd_vel
|
|
||||||
```
|
|
||||||
|
|
||||||
第三步：单臂真机。
|
|
||||||
|
|
||||||
先只上一个臂，确认网络、方向、急停和限幅：
|
|
||||||
|
|
||||||
```bash
|
|
||||||
ros2 launch xr_rm_bringup arm_debug.launch.py arm:=left use_mock:=false
|
|
||||||
ros2 launch xr_rm_bringup arm_debug.launch.py arm:=right use_mock:=false
|
|
||||||
```
|
|
||||||
|
|
||||||
所有 YAML 默认都不会执行 `movej(initial_joint_pose)`。只有确认安全区清空后，才可在当前使用的
|
|
||||||
`left_arm_rm75.yaml`、`right_arm_rm75.yaml` 或 `dual_arm_rm75.yaml` 中将
|
|
||||||
`move_to_initial_pose_on_connect` 改为 `true`。
|
|
||||||
|
|
||||||
第四步：双臂真机。
|
|
||||||
|
|
||||||
```bash
|
|
||||||
ros2 launch xr_rm_bringup arm_debug.launch.py arm:=both use_mock:=false
|
|
||||||
```
|
|
||||||
|
|
||||||
双臂默认不会自动移动到初始化点；机器人地址、控制参数和初始化移动开关均从
|
|
||||||
`dual_arm_rm75.yaml` 读取。
|
|
||||||
|
|
||||||
## Launch 入口说明
|
|
||||||
|
|
||||||
`arm_debug.launch.py` 是当前唯一的遥操作 launch 主入口，`launcher_ui.py` 中的 Simulation、MuJoCo 和 Real Hardware launch 命令都调用它。
|
|
||||||
|
|
||||||
常用参数：
|
|
||||||
|
|
||||||
- `arm`：`left`、`right`、`both`，默认 `right`。
|
|
||||||
- `use_mock`：`true` 不连接真机，`false` 连接 RM75。
|
|
||||||
- `use_mujoco`：`true` 额外启动双臂 MuJoCo 显示，默认 `false`，仅支持 `arm:=both`。
|
|
||||||
- `udp_host`：UDP 监听地址，默认 `0.0.0.0`。
|
|
||||||
- `udp_port`：UDP 监听端口，默认 `15000`。
|
|
||||||
- `udp_timer_hz`：UDP receiver 轮询频率，默认 `200.0`。
|
|
||||||
|
|
||||||
机器人 IP/端口、控制频率、CANFD、限速、工具和初始化位姿等行为参数只由对应 YAML
|
|
||||||
配置，launch 不再提供同名覆盖项。
|
|
||||||
|
|
||||||
## MuJoCo 双臂仿真
|
|
||||||
|
|
||||||
无真机时，由 Mock 关节状态驱动 MuJoCo：
|
|
||||||
|
|
||||||
```bash
|
```bash
|
||||||
ros2 launch xr_rm_bringup arm_debug.launch.py \
|
ros2 launch xr_rm_bringup arm_debug.launch.py \
|
||||||
arm:=both use_mock:=true use_mujoco:=true
|
arm:=both use_mock:=true use_mujoco:=true
|
||||||
```
|
```
|
||||||
|
|
||||||
连接真机时，由两台 RM75 的实际关节反馈同步 MuJoCo。下面命令会连接真机，执行前必须完成真机安全检查：
|
MuJoCo 只订阅关节状态，不参与控制。真机显示可将 `use_mock` 改为 `false`，
|
||||||
|
但该命令会同时连接两台 RM75。
|
||||||
|
|
||||||
|
### PICO 输入
|
||||||
|
|
||||||
|
只保留一个 UDP 输入源，然后启动 XRoboToolkit bridge：
|
||||||
|
|
||||||
```bash
|
```bash
|
||||||
ros2 launch xr_rm_bringup arm_debug.launch.py \
|
|
||||||
arm:=both use_mock:=false use_mujoco:=true
|
|
||||||
```
|
|
||||||
|
|
||||||
桌面 UI 的 `MuJoCo` 模式分别提供上述 Mock 和真机命令，并明确标记会连接真机的 `Dual Arm MuJoCo Real Hardware Launch`。
|
|
||||||
|
|
||||||
MuJoCo 只订阅当前关节状态，不参与控制，也不向真机下发指令：
|
|
||||||
|
|
||||||
- `/xr_rm/left_rm75/joint_states`、`/xr_rm/right_rm75/joint_states`：当前适配器反馈；Mock 与真机模式均按控制周期约 `90 Hz` 发布。真机底层原始反馈周期仍为 `5 ms`（约 `200 Hz`），由遥操作节点按 `90 Hz` 采样发布。
|
|
||||||
- `/xr_rm/left_rm75/joint_target`、`/xr_rm/right_rm75/joint_target`：经 QP 和现有限制处理后的目标关节角，仅用于调试，MuJoCo 不订阅。
|
|
||||||
- MuJoCo viewer 默认按 `dual_arm_mujoco.yaml` 中的 `60 Hz` 刷新。其初始姿态直接来自 `dual_arm_rm75.yaml` 的 `initial_joint_pose`，不会在 MuJoCo YAML 中重复保存。
|
|
||||||
|
|
||||||
Mock 模式的遥操作目标仍经过 `dual_arm_rm75.yaml` 中的工作空间、圆柱、线速度、角速度、关节速度/加速度、超时和停止限制。左手 X、右手 A 分别立即复位对应 Mock 机械臂；Grip 保持按下时，下一控制周期会重新锚定并继续遥操作。真机复位完成后仍需松开 Grip 才能恢复遥操作，且 `move_to_initial_pose_on_connect` 保持为 `false`，连接真机不会自动移动。
|
|
||||||
|
|
||||||
## 配置文件说明
|
|
||||||
|
|
||||||
`xr_rm_bringup/config/dual_arm_rm75.yaml` 是双臂配置主文件，包含两个 ROS 节点命名空间：
|
|
||||||
|
|
||||||
- `left_arm_teleop`
|
|
||||||
- `right_arm_teleop`
|
|
||||||
|
|
||||||
`left_arm_rm75.yaml` 和 `right_arm_rm75.yaml` 用于 `arm_debug.launch.py arm:=left/right` 的单臂调试，因为单臂节点名是 `single_arm_velocity_teleop`。
|
|
||||||
|
|
||||||
`dual_arm_mujoco.yaml` 只保存 MuJoCo viewer 刷新频率；双臂初始关节角和遥操作限制继续统一读取 `dual_arm_rm75.yaml`。
|
|
||||||
|
|
||||||
`xr_rm_bringup/config/peripherals_rm75.yaml` 保存真实控制器使用的末端工具坐标、负载和左右臂外设选择。左臂 `scissorgripper: 2` 是外设选择值，选择 `minisci`，TCP 的 Z 向偏移为 `0.165 m`；右臂 `scissorgripper: 1`，选择 `omnipic`，TCP 的 Z 向偏移为 `0.14 m`。真机连接阶段仍会初始化外设，关节反馈、关节指令、慢停和开合命令复用该单臂节点的同一个 RealMan 连接。
|
|
||||||
|
|
||||||
Placo 使用 `xr_rm_teleop/models/dual_rm75/Dual_arm.urdf`。左右 ROS 节点分别创建独立 solver：左臂从 `scissor_base_link` 到 `scissor_scissor_tcp`，并 mask 右臂；右臂从 `omnipic_base_link` 到 `omnipic_OmniPic_tcp`，并 mask 左臂。节点目标仍在各自局部基坐标系中，现有 PICO 映射不改为公共坐标系。
|
|
||||||
|
|
||||||
重点控制参数：
|
|
||||||
|
|
||||||
- `controller_topic`：订阅的手柄话题。
|
|
||||||
- `scale`：手柄位移到 TCP 位移的比例。
|
|
||||||
- `target_filter_alpha` / `target_filter_alpha_fast`：目标 TCP 低通滤波系数，快速移动时自动使用更大的系数。
|
|
||||||
- `target_filter_fast_threshold_m`：进入快速滤波区间的目标变化阈值。
|
|
||||||
- `max_linear_speed`：目标位姿单帧步长限制对应的最大线速度。
|
|
||||||
- `enable_orientation_control`：是否把手柄相对旋转映射到 TCP 姿态。
|
|
||||||
- `orientation_filter_alpha` / `orientation_deadband_rad`：按 SO(3) 最短旋转角处理的目标 TCP 姿态滤波和死区。
|
|
||||||
- `max_orientation_speed`：目标 TCP 姿态沿 SO(3) 最短路径的最大角速度，当前为 `0.5 rad/s`。
|
|
||||||
- `workspace_min` / `workspace_max`：笛卡尔工作空间边界。
|
|
||||||
- `cyl_radius_limit`：基座圆柱半径限制。
|
|
||||||
- `xr_to_robot_matrix`：`/xr/*_controller` Project 位移到 RM75 base 坐标的映射矩阵。
|
|
||||||
- `robot_ip` / `robot_port`：RM75 TCP 控制连接地址。
|
|
||||||
- `realtime_push_host_ip`：连接机械臂 Wi-Fi 后本机实际 IPv4；可用
|
|
||||||
`ip -4 route get 192.168.192.19` 查看输出中的 `src`，当前为 `192.168.192.148`。
|
|
||||||
- `realtime_push_port`：UDP 主动反馈端口；左臂 `8089`、右臂 `8090`，同机双臂不能重复。
|
|
||||||
- `realtime_push_cycle_ms`：UDP 主动反馈周期，当前为厂商支持的 `5 ms`。
|
|
||||||
- `follow` / `canfd_trajectory_mode`：`rm_movej_canfd` 的高跟随和轨迹模式参数。
|
|
||||||
- 当前三份 YAML 默认均使用 `follow: false` 完成安全基线验证；确认关节加速度与反馈稳定后，再单独测试高跟随。
|
|
||||||
- `initial_joint_pose`：mock 的初始关节反馈，以及显式开启初始化移动时的真机初始关节角。
|
|
||||||
|
|
||||||
当前 `/xr/*_controller` 的坐标处理：
|
|
||||||
|
|
||||||
- XRoboToolkit bridge 原样转发 SDK 的手柄位置和四元数，不额外转换坐标轴。
|
|
||||||
- receiver 默认按 `xyzw` 解析四元数，也可通过 `quat_order:=wxyz` 切换。
|
|
||||||
- 左臂映射：机器人位移增量 = `[-手柄y, 手柄z, -手柄x]`。
|
|
||||||
- 右臂映射：机器人位移增量 = `[手柄y, 手柄z, 手柄x]`。
|
|
||||||
- 两侧局部 `-Y` 均指向机器人前方；局部 `+Y` 指向后方，后方工作空间仅保留 `0.10 m`。
|
|
||||||
- 左臂局部 `+X/+Y/+Z` 分别指向下/后/左外侧；右臂分别指向上/后/右外侧。
|
|
||||||
|
|
||||||
如果某个机械臂方向相反，只改对应臂的 `xr_to_robot_matrix` 符号，不要同时改多个控制参数。
|
|
||||||
|
|
||||||
## 末端工具开合
|
|
||||||
|
|
||||||
真机 launch 默认会在遥操作节点内启用工具控制。左/右手柄 `trigger` 从低于阈值按到 `>= 0.95` 时，会切换一次对应夹爪开/关状态，并保持到下一次点击。`grip` 仍只控制机械臂运动，不影响夹爪 trigger 切换。
|
|
||||||
|
|
||||||
也可以用 Bool 话题手动控制开合，`true` 表示打开，`false` 表示闭合：
|
|
||||||
|
|
||||||
```bash
|
|
||||||
ros2 topic pub --once /xr_rm/left_rm75/tool_enable std_msgs/msg/Bool "{data: true}"
|
|
||||||
ros2 topic pub --once /xr_rm/left_rm75/tool_enable std_msgs/msg/Bool "{data: false}"
|
|
||||||
|
|
||||||
ros2 topic pub --once /xr_rm/right_rm75/tool_enable std_msgs/msg/Bool "{data: true}"
|
|
||||||
ros2 topic pub --once /xr_rm/right_rm75/tool_enable std_msgs/msg/Bool "{data: false}"
|
|
||||||
```
|
|
||||||
|
|
||||||
桌面 UI 的 `Real Hardware` 模式提供 `Left/Right Gripper Open/Close` 命令项；运行双臂真机 launch 时也可直接通过左右手柄 `trigger` 分别切换夹爪。
|
|
||||||
|
|
||||||
## UDP 数据格式
|
|
||||||
|
|
||||||
当前 XRoboToolkit bridge 每个周期发送一个双手柄 JSON 包：
|
|
||||||
|
|
||||||
```json
|
|
||||||
{
|
|
||||||
"t": 12.345,
|
|
||||||
"source_time": 12.345,
|
|
||||||
"seq": 42,
|
|
||||||
"frame_id": "xr_world",
|
|
||||||
"controllers": {
|
|
||||||
"left": {
|
|
||||||
"hand": "left",
|
|
||||||
"grip": true,
|
|
||||||
"trigger": 0.0,
|
|
||||||
"axis": [0.2, -0.4],
|
|
||||||
"buttons": {
|
|
||||||
"primary": true,
|
|
||||||
"secondary": false
|
|
||||||
},
|
|
||||||
"pos": [-0.12, 1.05, 0.30],
|
|
||||||
"quat": [0.0, 0.0, 0.0, 1.0],
|
|
||||||
"pose_valid": true,
|
|
||||||
"pose_source": "xrobotoolkit"
|
|
||||||
},
|
|
||||||
"right": {
|
|
||||||
"hand": "right",
|
|
||||||
"grip": true,
|
|
||||||
"trigger": 1.0,
|
|
||||||
"axis": [-0.1, 0.3],
|
|
||||||
"buttons": {
|
|
||||||
"primary": false,
|
|
||||||
"secondary": true
|
|
||||||
},
|
|
||||||
"pos": [0.12, 1.05, 0.30],
|
|
||||||
"quat": [0.0, 0.0, 0.0, 1.0],
|
|
||||||
"pose_valid": true,
|
|
||||||
"pose_source": "xrobotoolkit"
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
```
|
|
||||||
|
|
||||||
字段说明：
|
|
||||||
|
|
||||||
- `t` / `source_time`：bridge 的 PC 单调时间，用于诊断发送周期。
|
|
||||||
- `seq`：bridge 递增的 UDP 包序号，bridge 重启后重新计数。
|
|
||||||
- `frame_id`：默认 `xr_world`，会写入 `XrController.header.frame_id`。
|
|
||||||
- `grip`：运动使能。`true` 时进入相对位姿控制，`false` 时停止。
|
|
||||||
- `trigger`：经过 bridge 滞回处理的 `0.0/1.0` 值；上升沿切换对应夹爪状态。
|
|
||||||
- `axis`：摇杆 `[x, y]`，每个分量限制在 `-1.0` 到 `1.0`。
|
|
||||||
- `buttons.primary`：左手 X 键或右手 A 键。
|
|
||||||
- `buttons.secondary`：左手 Y 键或右手 B 键。
|
|
||||||
- `pos`：手柄位置，长度 3。
|
|
||||||
- `quat`：手柄姿态四元数，默认按 `xyzw` 解析。
|
|
||||||
- `pose_valid`：姿态是否可信；`false` 时接收端强制 `grip=false`。
|
|
||||||
- `pose_source`：当前 bridge 使用 `xrobotoolkit`。
|
|
||||||
|
|
||||||
`axis`、`buttons.primary` 和 `buttons.secondary` 会进入 `XrController`；旧 UDP
|
|
||||||
包缺少这些字段时分别回退为 `[0,0]`、`false` 和 `false`。
|
|
||||||
|
|
||||||
接收端发布的消息格式为：
|
|
||||||
|
|
||||||
```text
|
|
||||||
std_msgs/Header header
|
|
||||||
string hand
|
|
||||||
|
|
||||||
bool grip
|
|
||||||
float32 trigger
|
|
||||||
bool primary
|
|
||||||
bool secondary
|
|
||||||
float32[2] axis
|
|
||||||
|
|
||||||
geometry_msgs/Pose pose
|
|
||||||
```
|
|
||||||
|
|
||||||
`udp_controller_receiver` 仍兼容调试用的单手柄包：可以直接发送带 `hand`、`pos`、
|
|
||||||
`quat` 的 JSON object，也可以用 `controllers` list、顶层 `left/right`、
|
|
||||||
`pose.position`、`position`、`p`、`q` 等常见字段。
|
|
||||||
|
|
||||||
## 官方 XRoboToolkit bridge
|
|
||||||
|
|
||||||
如果使用官方 XRoboToolkit APK 和 PC-Service，可以用 `xrobotoolkit_to_udp_bridge` 从本机 ROS Python 环境中的 `xrobotoolkit_sdk` 读取左右手柄数据，再转换成当前 `udp_controller_receiver` 支持的 UDP JSON。
|
|
||||||
|
|
||||||
正式运行时不要同时启动官方 `PXREAClientUnity` / `RobotLinuxDemo` 可视化窗口。`/opt/apps/roboticsservice/run3D.sh` 会启动这个可视化 demo，适合单独确认 PICO 与 PC-Service 已连接；bridge 遥操作链路中只需要 PC-Service。
|
|
||||||
|
|
||||||
运行前只保留一个 UDP 输入源。先清掉重复 bridge、sample sender 和官方 Unity 可视化 demo，再保留或启动 PC-Service：
|
|
||||||
|
|
||||||
```bash
|
|
||||||
pkill -f '[x]robotoolkit_to_udp_bridge'
|
|
||||||
pkill -f '[s]ample_udp_sender'
|
|
||||||
pkill -f '[R]obotLinuxDemo.x86_64'
|
|
||||||
pkill -f '[P]XREAClientUnity'
|
|
||||||
pgrep -af RoboticsServiceProcess || /opt/apps/roboticsservice/runService.sh
|
|
||||||
```
|
|
||||||
|
|
||||||
启动 ROS mock 接收链路：
|
|
||||||
|
|
||||||
```bash
|
|
||||||
cd /home/robot/WS_xr
|
|
||||||
source /opt/ros/humble/setup.bash
|
|
||||||
source install/setup.bash
|
|
||||||
ros2 launch xr_rm_bringup arm_debug.launch.py arm:=both use_mock:=true
|
|
||||||
```
|
|
||||||
|
|
||||||
另开终端启动 bridge：
|
|
||||||
|
|
||||||
```bash
|
|
||||||
cd /home/robot/WS_xr
|
|
||||||
source ~/.bashrc
|
|
||||||
source /opt/ros/humble/setup.bash
|
|
||||||
source install/setup.bash
|
|
||||||
ros2 run xr_rm_input xrobotoolkit_to_udp_bridge \
|
ros2 run xr_rm_input xrobotoolkit_to_udp_bridge \
|
||||||
--host 127.0.0.1 --port 15000 --hz 90
|
--host 127.0.0.1 --port 15000 --hz 90
|
||||||
```
|
```
|
||||||
|
|
||||||
bridge 默认对 grip/trigger 做轻量滞回：`grip` 按下阈值 `0.90`、松开阈值 `0.75`；`trigger` 按下阈值 `0.95`、松开阈值 `0.75`。启动日志会打印 PID、UDP endpoint 和阈值，便于确认当前只运行了一个 bridge。
|
确认左右 topic 持续接收数据：
|
||||||
|
|
||||||
验证手柄数据是否进入 ROS：
|
|
||||||
|
|
||||||
```bash
|
```bash
|
||||||
ps -ef | grep -E 'xrobotoolkit_to_udp_bridge|sample_udp_sender|RobotLinuxDemo|PXREAClientUnity' | grep -v grep
|
|
||||||
ros2 topic hz /xr/left_controller
|
ros2 topic hz /xr/left_controller
|
||||||
ros2 topic hz /xr/right_controller
|
ros2 topic hz /xr/right_controller
|
||||||
ros2 topic echo /xr/left_controller --field pose.position
|
|
||||||
ros2 topic echo /xr/right_controller --field pose.position
|
|
||||||
ros2 topic echo /xr/left_controller --field grip
|
|
||||||
ros2 topic echo /xr/right_controller --field grip
|
|
||||||
ros2 topic echo /xr/right_controller --field trigger
|
|
||||||
```
|
```
|
||||||
|
|
||||||
`/xr/left_controller` 和 `/xr/right_controller` 持续刷新、位置随手柄移动变化、`grip` 随握持键切换，即表示官方 XRoboToolkit 数据已经进入当前遥操作输入层。
|
图形启动面板可运行 `python3 src/xr_rm_bringup/tools/launcher_ui.py`，提供
|
||||||
|
Simulation、MuJoCo、Real Hardware 和 Diagnostics 模式。
|
||||||
|
|
||||||
## 真机安全验证
|
### 真机
|
||||||
|
|
||||||
第一次接真机时按这个顺序走：
|
确认对应 YAML 中 `move_to_initial_pose_on_connect: false`，再从单臂开始：
|
||||||
|
|
||||||
1. 确认急停、网络、机械臂工作区和人员位置。
|
```bash
|
||||||
2. `launcher_ui.py` 中先 `Ping Left RM75` 或 `Ping Right RM75`。
|
ros2 launch xr_rm_bringup arm_debug.launch.py arm:=left use_mock:=false
|
||||||
3. 确认对应 YAML 中 `move_to_initial_pose_on_connect: false` 后单臂启动。
|
ros2 launch xr_rm_bringup arm_debug.launch.py arm:=right use_mock:=false
|
||||||
4. 手握急停，按住 `grip` 后只做小幅单轴移动。
|
```
|
||||||
5. 逐个确认上/下、前/后、左/右方向。
|
|
||||||
6. 小角度转动手柄，确认 `/xr_rm/<arm>/target_pose` 姿态和 `/xr_rm/<arm>/cmd_vel.twist.angular` 变化符合预期。
|
|
||||||
7. 点击对应 `trigger`，确认每次点击都会切换对应夹爪状态，松开 trigger 后状态保持且左右不串臂。
|
|
||||||
8. 确认松开 `grip` 后机械臂慢停，`/xr_rm/<arm>/cmd_vel` 回到零；trigger 仍只影响夹爪，不影响机械臂运动门控。
|
|
||||||
9. 左右臂都确认后，再运行 `Dual Arm RealMan Launch`。
|
|
||||||
|
|
||||||
当前项目没有双臂碰撞检测/避障。双臂首次联调时，请让两个工作区在物理上分开，低速验证，不要让两臂末端互相靠近。
|
单臂方向、限位、急停、超时停止和夹爪均验证后，才能启动双臂：
|
||||||
|
|
||||||
## 后续优化路线
|
```bash
|
||||||
|
ros2 launch xr_rm_bringup arm_debug.launch.py arm:=both use_mock:=false
|
||||||
|
```
|
||||||
|
|
||||||
为了达到“稳定可用的双臂 XR 遥操作/采摘平台”，建议按下面顺序推进：
|
按住 `grip` 控制对应机械臂；松开后停止。点击 `trigger` 切换对应夹爪开/关。
|
||||||
|
左手 X、右手 A 会请求对应机械臂回到配置的初始位姿；真机使用前必须清空安全区。
|
||||||
|
|
||||||
1. 稳定 PICO 数据链路：利用 `seq`、`source_time`、`pose_valid` 做频率、延迟、丢包和追踪状态统计，记录 `/xr/*_controller`、`/xr_rm/*/raw_target_pose`、`/xr_rm/*/target_pose`、`/xr_rm/*/target_clamped`、`/xr_rm/*/current_pose`。
|
## Launch 参数
|
||||||
2. 提升真机安全性：增加启动前安全检查、软件急停 topic、UI Stop 状态提示、双臂中间区域互斥边界和速度/加速度限幅。
|
|
||||||
3. 细化末端执行器：增加夹爪状态反馈、力控比例、安全上限和现场可视化提示。
|
|
||||||
4. 接入视觉和数据记录：加入 D405/D435 相机 launch、TF、内外参和 rosbag2 实验记录。
|
|
||||||
5. 从遥操作走向半自动：先做目标检测和 3D 定位提示，再做单臂辅助，最后做双臂任务分配和任务级状态机。
|
|
||||||
|
|
||||||
## 常见问题
|
统一入口为 `xr_rm_bringup/launch/arm_debug.launch.py`：
|
||||||
|
|
||||||
`launcher_ui.py` 提示找不到 `install/setup.bash`：
|
| 参数 | 默认值 | 说明 |
|
||||||
|
| --- | --- | --- |
|
||||||
|
| `arm` | `right` | `left`、`right` 或 `both` |
|
||||||
|
| `use_mock` | `true` | `false` 会连接真机 |
|
||||||
|
| `use_mujoco` | `false` | 仅支持 `arm:=both` |
|
||||||
|
| `udp_host` | `0.0.0.0` | UDP 监听地址 |
|
||||||
|
| `udp_port` | `15000` | UDP 监听端口 |
|
||||||
|
| `udp_timer_hz` | `200.0` | UDP receiver 轮询频率 |
|
||||||
|
|
||||||
|
## 配置
|
||||||
|
|
||||||
|
| 文件 | 用途 |
|
||||||
|
| --- | --- |
|
||||||
|
| `dual_arm_rm75.yaml` | 双臂节点、网络、控制与安全参数 |
|
||||||
|
| `left_arm_rm75.yaml` | 左臂单独调试 |
|
||||||
|
| `right_arm_rm75.yaml` | 右臂单独调试 |
|
||||||
|
| `peripherals_rm75.yaml` | 工具坐标、负载和末端执行器 |
|
||||||
|
| `dual_arm_mujoco.yaml` | MuJoCo 刷新频率 |
|
||||||
|
|
||||||
|
修改某一侧控制参数时，同时检查单臂和双臂 YAML 是否需要同步。必须保留工作空间/
|
||||||
|
圆柱限位、线速度与角速度限制、关节速度/加速度限制、指令超时和安全停止逻辑。
|
||||||
|
|
||||||
|
`configure_safety_limits` 不得默认关闭；
|
||||||
|
`move_to_initial_pose_on_connect` 必须保持默认 `false`。
|
||||||
|
|
||||||
|
## 测试
|
||||||
|
|
||||||
|
在工作空间根目录执行：
|
||||||
|
|
||||||
```bash
|
```bash
|
||||||
cd /home/robot/WS_xr
|
|
||||||
source /opt/ros/humble/setup.bash
|
source /opt/ros/humble/setup.bash
|
||||||
colcon build --symlink-install
|
colcon build --symlink-install
|
||||||
source install/setup.bash
|
colcon test --event-handlers console_direct+
|
||||||
|
colcon test-result --verbose
|
||||||
```
|
```
|
||||||
|
|
||||||
真机模式提示缺少 `Robotic_Arm`：
|
涉及遥操作姿态控制时，额外运行：
|
||||||
|
|
||||||
```text
|
```bash
|
||||||
未安装睿尔曼 Python API2。请安装厂商 SDK，或用 use_mock:=true 先跑模拟模式。
|
pytest src/xr_rm_teleop/test/test_orientation_control.py
|
||||||
```
|
```
|
||||||
|
|
||||||
Controller topic 没有数据：
|
真机验证不属于自动测试。默认使用 `use_mock:=true`，未经现场安全确认不要连接或
|
||||||
|
移动机械臂。
|
||||||
- 确认 UDP 发送端目标 IP 是运行 ROS2 的主机 IP。
|
|
||||||
- 确认端口是 `15000`，或 launch 与发送端端口一致。
|
|
||||||
- 用 `sample_udp_sender` 在本机验证接收链路。
|
|
||||||
- 确认 `xrobotoolkit_to_udp_bridge` 没有持续打印 SDK read failed；SDK
|
|
||||||
读取失败时 bridge 会发送 `pose_valid=false` 的停止包。
|
|
||||||
|
|
||||||
机械臂不动：
|
|
||||||
|
|
||||||
- 确认 `grip=true`。
|
|
||||||
- 确认 `udp_controller_receiver` 终端没有持续 `pose_valid=false` 日志；该字段不会写入 `XrController` 消息，但会让接收端强制停止。
|
|
||||||
- 确认 `/xr_rm/<arm>/raw_target_pose` 与 `/xr_rm/<arm>/target_pose` 是否在变化。
|
|
||||||
- 确认 `/xr_rm/<arm>/target_clamped` 是否持续为 `true`，如果是，目标 TCP 可能被工作空间、圆柱半径或单帧步长限制夹住。
|
|
||||||
- 确认真机 SDK 连接成功，且 RM75 没有报警或急停。
|
|
||||||
|
|||||||
File diff suppressed because it is too large
Load Diff
@@ -1,657 +0,0 @@
|
|||||||
# 右臂番茄采摘 ACT 数据采集适配设计
|
|
||||||
|
|
||||||
## 背景与目标
|
|
||||||
|
|
||||||
当前项目已经通过 ROS2 Humble、PICO 手柄、Placo QP 和 RealMan Python API2
|
|
||||||
完成 RM75 遥操作。右臂遥操节点以名义 `90 Hz` 读取实际关节反馈，根据 PICO
|
|
||||||
相对位姿生成 TCP 目标，经过工作空间限制、QP、关节速度与加速度限制后，通过
|
|
||||||
`rm_movej_canfd` 下发最终关节目标。
|
|
||||||
|
|
||||||
本次变更在不重写现有遥操链路的前提下，增加一个独立的 ALOHA/ACT 风格数据采集
|
|
||||||
节点。第一阶段只采集右臂番茄采摘任务，每个 episode 覆盖从初始位姿出发、抓取
|
|
||||||
番茄、搬运至 RM75 下方收集篮并释放番茄的完整过程。
|
|
||||||
|
|
||||||
核心目标如下：
|
|
||||||
|
|
||||||
- 以右臂 7 个实际关节角和夹爪逻辑状态作为 `observations/qpos`；
|
|
||||||
- 以实际成功下发或零阶保持的 7 个最终关节目标和夹爪目标作为 `action`；
|
|
||||||
- 同步采集一台全局 D455 和一台右腕 D405 的 RGB 图像；
|
|
||||||
- 以 `30 Hz` 形成同周期因果对齐的数据；
|
|
||||||
- 每个完整任务流式保存为一个 ALOHA/ACT 核心结构兼容的 HDF5 文件；
|
|
||||||
- 支持手柄开始、结束、丢弃、拒绝、质量检查、崩溃恢复和编号防覆盖；
|
|
||||||
- 保留足够的 PICO、TCP、QP、夹爪和时间戳调试数据，但不让采集节点进入机器人
|
|
||||||
控制链路。
|
|
||||||
|
|
||||||
参考实现为 ALOHA 官方仓库中的
|
|
||||||
[`record_episodes.py`](https://github.com/tonyzhaozh/aloha/blob/master/aloha_scripts/record_episodes.py)。
|
|
||||||
官方双臂数据使用 14 维状态和动作；本项目第一阶段采用右臂 `7+1=8` 维，因此只
|
|
||||||
保证 HDF5 核心组织方式兼容，不声称官方旧训练加载器可以不修改直接训练。
|
|
||||||
|
|
||||||
## 非目标
|
|
||||||
|
|
||||||
第一阶段明确不实现：
|
|
||||||
|
|
||||||
- 左臂或双臂 ACT 采集；
|
|
||||||
- ACT 训练代码、数据加载器、策略部署或自动完成判定；
|
|
||||||
- 深度图、红外图、点云、图像压缩或 ROS 图像话题；
|
|
||||||
- rosbag、中间格式、离线转换工具、GUI、声音或手柄震动反馈；
|
|
||||||
- 让 ACT 学习 A 键触发的回初始位姿运动；
|
|
||||||
- 修改现有工作空间限制、圆柱限制、速度限制、指令超时、安全停止或
|
|
||||||
`move_to_initial_pose_on_connect` 默认值；
|
|
||||||
- 新建重复的 ROS2 包或第二个 RealMan 连接。
|
|
||||||
|
|
||||||
后续训练时建议将 ACT `chunk_size` 设为 `60`，对应约 2 秒动作长度；该参数属于
|
|
||||||
训练配置，不写死在采集逻辑中。
|
|
||||||
|
|
||||||
## 现有控制链路与关键约束
|
|
||||||
|
|
||||||
现有 `single_arm_velocity_teleop` 在每个控制周期内依次完成：
|
|
||||||
|
|
||||||
```text
|
|
||||||
读取最新 RM75 反馈
|
|
||||||
→ 同步 Placo 状态
|
|
||||||
→ 读取 PICO 状态并生成 TCP 目标
|
|
||||||
→ 工作空间、位姿步长与速度限制
|
|
||||||
→ Placo QP
|
|
||||||
→ 关节速度与加速度限制
|
|
||||||
→ rm_movej_canfd 下发
|
|
||||||
→ 发布 joint_target 调试话题
|
|
||||||
```
|
|
||||||
|
|
||||||
当前 `joint_states`、TCP 调试话题和 `joint_target` 分别发布并各自取时间戳。如果
|
|
||||||
采集节点仅订阅这些分散话题，即使时间接近，也可能把第 100 个控制周期的
|
|
||||||
`q_actual` 与第 99 个控制周期的 `q_target` 拼在一起。这里的“第 100 个周期”是
|
|
||||||
控制序号，不是 `100 Hz`；现有控制频率仍是名义 `90 Hz`。
|
|
||||||
|
|
||||||
此外，A 键回位调用的是一次阻塞式 `rm_movej(initial_joint_pose)`。轨迹由 RM75
|
|
||||||
控制器内部生成，项目不能获得每个控制周期的中间目标，也不经过当前 QP 和
|
|
||||||
`rm_movej_canfd` 链路，因此不能与遥操动作混用同一种标签语义。
|
|
||||||
|
|
||||||
## 总体架构
|
|
||||||
|
|
||||||
采用一个自定义原子控制采样消息和一个独立 ACT 采集节点：
|
|
||||||
|
|
||||||
```text
|
|
||||||
PICO 输入 + RM75 反馈
|
|
||||||
↓
|
|
||||||
single_arm_velocity_teleop（90 Hz）
|
|
||||||
↓
|
|
||||||
QP → 关节限速/限加速度 → RM75 下发
|
|
||||||
↓
|
|
||||||
ActControlSample（同周期、同时间戳、同序号）
|
|
||||||
↓
|
|
||||||
act_episode_recorder（每 3 个控制周期取 1 个）
|
|
||||||
├──────────────┐
|
|
||||||
↓ ↓
|
|
||||||
全局 D455 RGB 右腕 D405 RGB
|
|
||||||
└──────┬───────┘
|
|
||||||
↓
|
|
||||||
30 Hz 流式写入临时 HDF5
|
|
||||||
↓
|
|
||||||
裁剪 → 质量检查 → 保存/拒绝/丢弃
|
|
||||||
```
|
|
||||||
|
|
||||||
“原子”表示消息是一个逻辑上不可拆分的控制周期快照。订阅者要么收到该周期完整的
|
|
||||||
反馈、求解结果、最终动作和状态，要么该周期整体缺失；不会自行拼接多个异步话题。
|
|
||||||
|
|
||||||
职责边界如下：
|
|
||||||
|
|
||||||
- 遥操节点继续唯一负责 RM75 连接、反馈、QP、限位、动作下发和安全停止；
|
|
||||||
- 遥操节点只增加原子消息发布和夹爪逻辑状态记录，不读取相机、不写 HDF5；
|
|
||||||
- 采集节点只订阅控制/PICO 数据、独占两台相机并写文件，不连接或控制 RM75；
|
|
||||||
- 采集节点异常、退出或写盘过慢不得阻塞遥操发布或改变机器人动作；
|
|
||||||
- 相机由采集节点通过 `pyrealsense2` 直接打开，不再发布和重新订阅 ROS 图像。
|
|
||||||
|
|
||||||
原子消息使用本机低延迟、非阻塞的 best-effort QoS。采集节点检测任何需要保留的
|
|
||||||
控制周期丢失并拒绝 episode，而不是让 DDS 反压影响遥操控制。
|
|
||||||
|
|
||||||
## 原子控制采样消息
|
|
||||||
|
|
||||||
在 `xr_rm_interfaces` 中新增 `ActControlSample.msg`，发布话题为：
|
|
||||||
|
|
||||||
```text
|
|
||||||
/xr_rm/right_rm75/act_control_sample
|
|
||||||
```
|
|
||||||
|
|
||||||
消息至少表达以下内容：
|
|
||||||
|
|
||||||
| 类别 | 字段语义 |
|
|
||||||
|---|---|
|
|
||||||
| 周期标识 | ROS header、`control_seq`、控制周期单调时间戳 |
|
|
||||||
| 关节反馈 | `q_actual[7]`、当前 URDF 关节上下限、反馈接收单调时间戳、反馈年龄、反馈有效状态 |
|
|
||||||
| QP | QP 原始输出或失败时的保持目标 `q_qp_raw[7]`、是否尝试、成功状态、耗时 |
|
|
||||||
| 最终动作 | 经关节限速后的 `q_target[7]`、动作时间戳、是否当前周期成功下发 |
|
|
||||||
| TCP | 当前 TCP、PICO 映射前的原始目标 TCP、最终受限目标 TCP、命令速度 |
|
|
||||||
| PICO | 当前右手位姿、Grip、Trigger、A、B 和摇杆值 |
|
|
||||||
| 夹爪 | 请求目标、已确认逻辑状态、命令是否处理中、命令是否失败 |
|
|
||||||
| 控制状态 | `teleop_active`、`action_valid`、QP 回退、目标限位和控制故障状态 |
|
|
||||||
|
|
||||||
数值型关节字段在 ROS 消息中保持双精度，写入 HDF5 核心数据时显式转换成
|
|
||||||
`float32`。位姿使用位置加四元数，不保存完整 Placo 对象、Hessian、约束矩阵或
|
|
||||||
其他大体积求解器内部状态。
|
|
||||||
|
|
||||||
消息在每个实际执行的 90 Hz 控制回调中发布，包括 Grip 松开和安全停止状态：
|
|
||||||
|
|
||||||
- 当前周期成功发送动作时，`command_sent=true`；
|
|
||||||
- 当前周期没有发送，但此前存在成功目标时，`q_target` 零阶保持上一个成功目标，
|
|
||||||
`command_sent=false`、`action_valid=true`；
|
|
||||||
- 尚未形成任何有效目标或当前动作发送失败时，`action_valid=false`；
|
|
||||||
- QP 失败但成功重发上次有效目标时，`qp_success=false`、`action_valid=true`；
|
|
||||||
- 发送失败必须发布失败状态，并由采集节点拒绝当前 episode。
|
|
||||||
|
|
||||||
相机数据不放进该消息。相机时间戳和帧号由采集节点在同一主机的单调时钟域中补充。
|
|
||||||
|
|
||||||
## 夹爪数据语义
|
|
||||||
|
|
||||||
右臂使用 Modbus 电动夹爪。由于不同番茄尺寸会导致实际停止开度不同，而本项目只
|
|
||||||
关心抓取意图，第一阶段不读取或估算实际开度。
|
|
||||||
|
|
||||||
统一约定：
|
|
||||||
|
|
||||||
```text
|
|
||||||
0 = closed
|
|
||||||
1 = open
|
|
||||||
```
|
|
||||||
|
|
||||||
两类状态必须分开：
|
|
||||||
|
|
||||||
- `action[7]` 是目标状态，在 Trigger 产生开合请求的控制周期立即改变；
|
|
||||||
- `qpos[7]` 是已确认逻辑状态，只有 Modbus 命令正常返回后才改变；
|
|
||||||
- 命令失败时 `qpos[7]` 保持原值，并拒绝当前 episode；
|
|
||||||
- 采集前右臂夹爪必须成功初始化为完全打开 `1.0`，之后才允许把初始
|
|
||||||
`qpos[7]` 设为 `1`；
|
|
||||||
- 不再使用原先含义不明确的 `0.75 → 0.15` 初始化序列。
|
|
||||||
|
|
||||||
结束一个有效番茄采摘 episode 前，操作者应先请求打开夹爪，等待日志/状态确认
|
|
||||||
逻辑状态已经变为 `open`，再松开 Grip 并按 B。结束时夹爪命令仍在执行，保存状态
|
|
||||||
最多等待 3 秒；失败或超时则拒绝。最终裁剪后的数据若没有包含已确认的打开状态，
|
|
||||||
同样拒绝，不能把保存后的成功状态回填到更早样本中。
|
|
||||||
|
|
||||||
## 相机配置与采集
|
|
||||||
|
|
||||||
第一阶段固定使用两台已确定序列号的 RealSense：
|
|
||||||
|
|
||||||
| ACT 名称 | 型号与位置 | 序列号 |
|
|
||||||
|---|---|---|
|
|
||||||
| `cam_high` | 全局 D455 | `234222303366` |
|
|
||||||
| `cam_right_wrist` | 右臂腕部 D405 | `412622272532` |
|
|
||||||
|
|
||||||
两路图像参数统一为：
|
|
||||||
|
|
||||||
```text
|
|
||||||
分辨率：640 × 480
|
|
||||||
帧率：30 FPS
|
|
||||||
格式：RGB uint8
|
|
||||||
HDF5 形状：(T, 480, 640, 3)
|
|
||||||
```
|
|
||||||
|
|
||||||
不采集深度、红外和点云，不使用 JPEG 压缩。采集线程直接请求 RealSense RGB8，
|
|
||||||
避免为颜色通道转换引入 OpenCV 依赖。
|
|
||||||
|
|
||||||
每台相机使用独立采集线程和一个很小的 `deque` 帧缓冲。每帧保存：
|
|
||||||
|
|
||||||
- RealSense 帧号；
|
|
||||||
- RealSense 硬件时间戳；
|
|
||||||
- `wait_for_frames` 返回后立即读取的主机单调时间戳；
|
|
||||||
- RGB 数组。
|
|
||||||
|
|
||||||
两台设备的硬件时钟不能默认视为同一时钟域，因此正式对齐只使用同一主机的单调
|
|
||||||
时钟；硬件时间戳只用于发现设备重启、帧号跳变和采集异常。
|
|
||||||
|
|
||||||
采集节点独占相机。指定设备缺失、型号/序列号不匹配、流配置失败或已经被其他
|
|
||||||
进程占用时，预检失败并停留在 `IDLE`，不自动替换成其他相机。
|
|
||||||
|
|
||||||
## 30 Hz 采样与因果对齐
|
|
||||||
|
|
||||||
正式采样不使用独立的 30 Hz ROS 定时器。采集节点在首次有效 Grip 控制周期记录
|
|
||||||
`sample_origin_seq`，随后只选择：
|
|
||||||
|
|
||||||
```text
|
|
||||||
(control_seq - sample_origin_seq) % 3 == 0
|
|
||||||
```
|
|
||||||
|
|
||||||
因此 90 Hz 控制消息按 `0、3、6、9...` 的相对序号形成名义 30 Hz 数据，同时保证
|
|
||||||
第一个正式样本就是首次有效动作，而不是等待一个全局取模相位。
|
|
||||||
|
|
||||||
每个样本的定义为：
|
|
||||||
|
|
||||||
```text
|
|
||||||
observation[t]
|
|
||||||
= 当前控制周期开始时读取的 q_actual
|
|
||||||
+ 对每台相机选择主机时间戳不晚于该控制周期的最新帧
|
|
||||||
|
|
||||||
action[t]
|
|
||||||
= 同一控制周期经 QP、关节限速后成功发送的 q_target
|
|
||||||
或 Grip 暂停/QP 回退时明确定义的上次成功目标
|
|
||||||
```
|
|
||||||
|
|
||||||
采集节点收到消息时，相机缓冲中可能已经存在晚于控制周期的帧，因此不能简单取
|
|
||||||
“回调时最新帧”，必须按 `host_monotonic_ns <= control_monotonic_ns` 选择最近帧。
|
|
||||||
不存在满足条件且年龄不超过 50 ms 的帧时，当前 episode 拒绝。
|
|
||||||
|
|
||||||
不采用官方旧加载器中的 `action[t-1]` 补丁。HDF5 根属性写入：
|
|
||||||
|
|
||||||
```text
|
|
||||||
action_alignment = "same_step_causal"
|
|
||||||
```
|
|
||||||
|
|
||||||
控制、反馈、动作和图像源时间戳全部保存在 `/debug`，未来只有在真实延迟测量证明
|
|
||||||
存在稳定偏移时，才在训练加载器中调整；原始 HDF5 不进行不可逆移位。
|
|
||||||
|
|
||||||
## Episode 边界与手柄状态机
|
|
||||||
|
|
||||||
### 按键映射
|
|
||||||
|
|
||||||
- 右手 B，即右手 `secondary` 单击：开始准备或结束保存；
|
|
||||||
- 左手 Y，即左手 `secondary` 长按 1 秒：丢弃当前准备/录制；
|
|
||||||
- 右手 A，即右手 `primary`：继续保持现有右臂回初始位姿功能；
|
|
||||||
- Grip：继续只控制遥操离合，不作为“只在按下时才记录”的采集开关。
|
|
||||||
|
|
||||||
右手 B 在右手 Grip 按下时始终忽略，避免运动中误触开始或结束。左手 Y 仅在
|
|
||||||
`ARMED` 或 `RECORDING` 中长按有效，在 `IDLE` 中无作用，且永远不删除上一个已经
|
|
||||||
保存的 episode。
|
|
||||||
|
|
||||||
### 状态机
|
|
||||||
|
|
||||||
```text
|
|
||||||
IDLE
|
|
||||||
└─ Grip 松开时单击右手 B
|
|
||||||
├─ 预检失败 → IDLE
|
|
||||||
└─ 预检通过 → ARMED
|
|
||||||
|
|
||||||
ARMED
|
|
||||||
├─ 第一次 Grip 有效动作 → RECORDING
|
|
||||||
├─ 再次单击右手 B → 取消 → IDLE
|
|
||||||
├─ 长按左手 Y 1 秒 → DISCARDED → IDLE
|
|
||||||
└─ 按右手 A → 取消 → IDLE
|
|
||||||
|
|
||||||
RECORDING
|
|
||||||
├─ Grip 松开后单击右手 B → SAVING
|
|
||||||
├─ 长按左手 Y 1 秒 → DISCARDED → IDLE
|
|
||||||
├─ 按右手 A → REJECTED → IDLE
|
|
||||||
└─ 硬质量故障/60 秒上限/Ctrl+C → REJECTED → IDLE
|
|
||||||
|
|
||||||
SAVING
|
|
||||||
├─ 质量检查通过 → SAVED → IDLE
|
|
||||||
└─ 质量检查失败 → REJECTED → IDLE
|
|
||||||
```
|
|
||||||
|
|
||||||
`IDLE`、`ARMED`、`RECORDING`、`SAVING` 是运行状态；`SAVED`、`DISCARDED`、
|
|
||||||
`REJECTED` 是短暂结果状态，发布一次结果并输出日志后回到 `IDLE`。`SAVING`
|
|
||||||
期间忽略 B/Y 录制按键，A 键仍属于原有遥操逻辑，但不会再进入已经结束的数据。
|
|
||||||
|
|
||||||
状态通过 `std_msgs/msg/String` 话题 `/act/recording_status` 和终端日志报告，不增加
|
|
||||||
新状态消息、声音或震动接口。
|
|
||||||
|
|
||||||
### 连续记录与 Grip 暂停
|
|
||||||
|
|
||||||
正式时间轴从 `ARMED` 后 Grip 按下且第一次
|
|
||||||
`action_valid=true、command_sent=true` 的控制周期开始。Grip 刚按下的建基准周期
|
|
||||||
尚未向 RM75 发送新的 CANFD 目标，因此不作为第一个训练样本。
|
|
||||||
录制过程中临时松开 Grip 时仍以 30 Hz 保存图像和 `qpos`，`action` 零阶保持上次
|
|
||||||
成功目标，并记录 `teleop_active=false`：
|
|
||||||
|
|
||||||
- 松开后重新按 Grip：暂停区间保留，继续同一个 episode；
|
|
||||||
- 最后一次松开后按 B：将该次松开至 B 之间的纯操作等待数据裁掉，episode 结束在
|
|
||||||
最后一次 Grip 松开附近；
|
|
||||||
- 夹爪打开确认必须已经包含在裁剪终点之前，否则拒绝该 episode。
|
|
||||||
|
|
||||||
只在 Grip 按下时保存数据会丢失接近任务开始、暂停恢复和完整视觉上下文，因此不
|
|
||||||
采用该方案。
|
|
||||||
|
|
||||||
### Episode 是否包含 A 键回位
|
|
||||||
|
|
||||||
一个正式 episode 只包含：
|
|
||||||
|
|
||||||
```text
|
|
||||||
初始位姿、夹爪打开
|
|
||||||
→ 接近番茄
|
|
||||||
→ 闭合夹爪
|
|
||||||
→ 搬运至收集篮
|
|
||||||
→ 打开夹爪并确认成功
|
|
||||||
→ 松开 Grip
|
|
||||||
→ 按 B 结束
|
|
||||||
```
|
|
||||||
|
|
||||||
A 键的 `rm_movej(initial_joint_pose)` 必须在成功结束 episode 后执行，不写进
|
|
||||||
episode。这样 ACT 始终学习同一种逐周期 `q_target` 动作语义。未来实时推理若要
|
|
||||||
连续采摘，应由上层状态机执行：
|
|
||||||
|
|
||||||
```text
|
|
||||||
ACT 完成一次采摘 → 完成判定 → 固定 rm_movej 复位 → 下一次 ACT 采摘
|
|
||||||
```
|
|
||||||
|
|
||||||
若在 `RECORDING` 中误按 A，当前文件转入拒绝目录，原因写为：
|
|
||||||
|
|
||||||
```text
|
|
||||||
initial_pose_command_during_episode
|
|
||||||
```
|
|
||||||
|
|
||||||
拒绝数据不会拦截 A 键原有回位动作，也不会额外控制机器人。
|
|
||||||
|
|
||||||
## HDF5 核心结构
|
|
||||||
|
|
||||||
数据根目录和任务目录固定为：
|
|
||||||
|
|
||||||
```text
|
|
||||||
/home/robot/ACT_Data
|
|
||||||
/home/robot/ACT_Data/tomato_pick
|
|
||||||
```
|
|
||||||
|
|
||||||
正式文件核心结构：
|
|
||||||
|
|
||||||
```text
|
|
||||||
/observations/qpos float32 (T, 8)
|
|
||||||
/observations/images/cam_high uint8 (T, 480, 640, 3)
|
|
||||||
/observations/images/cam_right_wrist uint8 (T, 480, 640, 3)
|
|
||||||
/action float32 (T, 8)
|
|
||||||
/debug/...
|
|
||||||
```
|
|
||||||
|
|
||||||
`T` 是该次任务的实际样本数，不要求所有 episode 等长，不进行文件内 padding。
|
|
||||||
最短有效 episode 为 `60` 个样本，即 2 秒；最长为 `1800` 个样本，即 60 秒。
|
|
||||||
|
|
||||||
8 维字段顺序固定为：
|
|
||||||
|
|
||||||
```text
|
|
||||||
qpos[0:7] = RM75 实际反馈关节角，单位 rad
|
|
||||||
qpos[7] = 已确认夹爪逻辑状态，0 closed、1 open
|
|
||||||
|
|
||||||
action[0:7] = 最终成功下发或明确定义为保持的关节目标，单位 rad
|
|
||||||
action[7] = 夹爪请求目标，0 closed、1 open
|
|
||||||
```
|
|
||||||
|
|
||||||
根属性至少包括：
|
|
||||||
|
|
||||||
| 属性 | 值或语义 |
|
|
||||||
|---|---|
|
|
||||||
| `sim` | `false`，与 ALOHA 真实数据约定一致 |
|
|
||||||
| `task_name` | `tomato_pick` |
|
|
||||||
| `sample_rate_hz` | `30` |
|
|
||||||
| `action_alignment` | `same_step_causal` |
|
|
||||||
| `arm` | `right_rm75` |
|
|
||||||
| `episode_status` | `saved` 或 `rejected` |
|
|
||||||
| `camera_high_serial` | `234222303366` |
|
|
||||||
| `camera_right_wrist_serial` | `412622272532` |
|
|
||||||
| `joint_names` | 7 个 RM75 关节名和 `gripper` 的固定顺序 |
|
|
||||||
| `joint_lower_limits` | 来自当前 Placo/URDF 的 7 关节下限 |
|
|
||||||
| `joint_upper_limits` | 来自当前 Placo/URDF 的 7 关节上限 |
|
|
||||||
| `reject_reason` | 仅拒绝文件存在 |
|
|
||||||
| `interrupted` | 正常文件为 `false`，Ctrl+C/异常恢复为 `true` |
|
|
||||||
|
|
||||||
图像不压缩，每帧使用一个 HDF5 chunk；数值数据使用可扩展的一维时间轴并分块
|
|
||||||
写入。按两路 `640×480×3×30` 计算，图像数据约为 3.3 GB/分钟，因此不能把完整
|
|
||||||
episode 先缓存到内存再一次性保存。
|
|
||||||
|
|
||||||
不创建 `/observations/qvel`、`/observations/effort`、压缩标记或 `compress_len`；
|
|
||||||
也不使用零值、有限差分或其他伪数据填充缺失字段。后续训练加载器按存在的核心
|
|
||||||
字段读取。
|
|
||||||
|
|
||||||
## Debug 结构
|
|
||||||
|
|
||||||
自定义消息是运行时传输载体，进程退出后不会保留；HDF5 `/debug` 是永久诊断记录。
|
|
||||||
ACT 训练默认不读取该组。
|
|
||||||
|
|
||||||
建议使用以下精简结构，布尔状态以 `uint8` 保存：
|
|
||||||
|
|
||||||
```text
|
|
||||||
/debug/timestamps/control_monotonic_ns int64 (T,)
|
|
||||||
/debug/timestamps/feedback_monotonic_ns int64 (T,)
|
|
||||||
/debug/timestamps/action_monotonic_ns int64 (T,)
|
|
||||||
/debug/timestamps/cam_high_host_monotonic_ns int64 (T,)
|
|
||||||
/debug/timestamps/cam_wrist_host_monotonic_ns int64 (T,)
|
|
||||||
/debug/timestamps/cam_high_hardware_ms float64 (T,)
|
|
||||||
/debug/timestamps/cam_wrist_hardware_ms float64 (T,)
|
|
||||||
/debug/timestamps/cam_high_age_ms float32 (T,)
|
|
||||||
/debug/timestamps/cam_wrist_age_ms float32 (T,)
|
|
||||||
/debug/timestamps/inter_camera_skew_ms float32 (T,)
|
|
||||||
|
|
||||||
/debug/cameras/cam_high_frame_number uint64 (T,)
|
|
||||||
/debug/cameras/cam_wrist_frame_number uint64 (T,)
|
|
||||||
|
|
||||||
/debug/control/control_seq uint64 (T,)
|
|
||||||
/debug/control/teleop_active uint8 (T,)
|
|
||||||
/debug/control/action_valid uint8 (T,)
|
|
||||||
/debug/control/command_sent uint8 (T,)
|
|
||||||
/debug/control/target_clamped uint8 (T,)
|
|
||||||
/debug/control/control_fault uint8 (T,)
|
|
||||||
|
|
||||||
/debug/qp/raw_target float32 (T, 7)
|
|
||||||
/debug/qp/attempted uint8 (T,)
|
|
||||||
/debug/qp/success uint8 (T,)
|
|
||||||
/debug/qp/duration_ms float32 (T,)
|
|
||||||
|
|
||||||
/debug/tcp/current_pose float32 (T, 7)
|
|
||||||
/debug/tcp/raw_target_pose float32 (T, 7)
|
|
||||||
/debug/tcp/final_target_pose float32 (T, 7)
|
|
||||||
/debug/tcp/command_velocity float32 (T, 6)
|
|
||||||
|
|
||||||
/debug/pico/right_pose float32 (T, 7)
|
|
||||||
/debug/pico/right_inputs float32 (T, 6)
|
|
||||||
/debug/pico/left_secondary uint8 (T,)
|
|
||||||
|
|
||||||
/debug/gripper/target_open uint8 (T,)
|
|
||||||
/debug/gripper/state_open uint8 (T,)
|
|
||||||
/debug/gripper/command_pending uint8 (T,)
|
|
||||||
/debug/gripper/command_failed uint8 (T,)
|
|
||||||
```
|
|
||||||
|
|
||||||
位姿顺序统一为 `[x, y, z, qx, qy, qz, qw]`，TCP 速度顺序统一为
|
|
||||||
`[vx, vy, vz, wx, wy, wz]`。`right_inputs` 顺序在文件属性中写明。当前周期没有发送
|
|
||||||
动作时，`action_monotonic_ns=-1`，并以 `command_sent=false` 消除歧义。
|
|
||||||
|
|
||||||
episode 根属性额外保存 QP 失败次数、失败占比、最长连续失败次数、目标限位次数、
|
|
||||||
相机帧率、丢帧率和最大时间偏差等汇总指标。
|
|
||||||
|
|
||||||
## 数据质量规则
|
|
||||||
|
|
||||||
### 开始前预检
|
|
||||||
|
|
||||||
Grip 松开时单击 B 后，采集节点检查：
|
|
||||||
|
|
||||||
- 输出目录存在或可以创建且可写；
|
|
||||||
- 可用空间不少于 4 GiB，约为 60 秒原始图像估算值的 1.2 倍；
|
|
||||||
- 两台指定相机均在线、已经连续预热 5 秒且当前帧率合格；
|
|
||||||
- 最近 `q_actual` 合法，反馈年龄不超过 50 ms，RM75 无掉使能或控制故障；
|
|
||||||
- 右臂夹爪初始化打开命令已经成功；
|
|
||||||
- 左右 PICO 话题均在现有手柄超时范围内保持新鲜；
|
|
||||||
- 没有第二个采集进程持有任务目录锁或相机设备；
|
|
||||||
- 启动组合是 `arm:=right use_mock:=false record_act:=true`。
|
|
||||||
|
|
||||||
任一预检失败时输出明确原因并停留在 `IDLE`，不生成空文件，也不改变机器人状态。
|
|
||||||
|
|
||||||
### 硬拒绝条件
|
|
||||||
|
|
||||||
以下任一情况使当前 episode 进入 `REJECTED`：
|
|
||||||
|
|
||||||
- 样本少于 60 或达到 60 秒上限；
|
|
||||||
- 控制周期序列缺失、有效平均采样率低于 27 Hz 或相邻样本间隔超过 100 ms；
|
|
||||||
- `qpos/action` 不是 `(T,8)`、包含 NaN/Inf、违反配置关节限制或夹爪值不是
|
|
||||||
`0/1`；
|
|
||||||
- `q_actual` 年龄超过 50 ms，反馈超时、掉使能或出现控制故障；
|
|
||||||
- 最终关节动作发送失败，或消息表示的反馈和动作不属于同一控制周期；
|
|
||||||
- 夹爪命令失败、超时，或最终裁剪数据没有包含已确认的打开状态；
|
|
||||||
- 任一路相机平均帧率低于 27 FPS；
|
|
||||||
- 任一路相机硬件帧号丢失率超过 1%，或采样后的重复/跳帧比例超过 1%；
|
|
||||||
- 任一采样图像年龄超过 50 ms，或两路图像主机时间差超过 50 ms；
|
|
||||||
- 图像形状、数据类型或 RGB 通道约定错误；
|
|
||||||
- 录制中按 A；
|
|
||||||
- HDF5 写入失败、磁盘空间不足或有界写入队列持续积压；
|
|
||||||
- Ctrl+C、采集节点异常退出或启动时恢复崩溃残留文件。
|
|
||||||
|
|
||||||
采集节点的拒绝只处理数据，不额外发送停止或运动命令。若原因来自控制故障，仍由
|
|
||||||
现有遥操安全链路执行原有安全停止。
|
|
||||||
|
|
||||||
### 允许但记录告警的情况
|
|
||||||
|
|
||||||
QP 求解偶发失败时，现有逻辑保留上次有效关节目标。只要该保持目标最终成功发送、
|
|
||||||
反馈和其他质量规则正常，就不自动拒绝 episode，而是保存：
|
|
||||||
|
|
||||||
- QP 失败样本数；
|
|
||||||
- 失败占比；
|
|
||||||
- 最长连续失败样本数；
|
|
||||||
- 每个样本的 `qp_success`。
|
|
||||||
|
|
||||||
工作空间限位、TCP 步长限制或关节速度/加速度限制生效同样只记录，不自动拒绝。
|
|
||||||
这些限制是正常安全控制的一部分。
|
|
||||||
|
|
||||||
## 文件编号、保存、拒绝与恢复
|
|
||||||
|
|
||||||
正式编号只扫描任务目录根部的 `episode_<数字>.hdf5`，取最大编号加一：
|
|
||||||
|
|
||||||
```text
|
|
||||||
已有 episode_0.hdf5 ... episode_9.hdf5
|
|
||||||
重启后下一个正式文件仍为 episode_10.hdf5
|
|
||||||
```
|
|
||||||
|
|
||||||
不填补编号空洞，绝不覆盖已有正式文件。任务目录使用标准库文件锁保证同一时刻只有
|
|
||||||
一个采集进程分配编号和写入；临时文件与目标文件位于同一文件系统，检查通过后使用
|
|
||||||
不覆盖已有目标的原子发布方式。
|
|
||||||
|
|
||||||
文件生命周期：
|
|
||||||
|
|
||||||
```text
|
|
||||||
录制中：
|
|
||||||
/home/robot/ACT_Data/tomato_pick/episode_10.partial.hdf5
|
|
||||||
|
|
||||||
检查通过：
|
|
||||||
/home/robot/ACT_Data/tomato_pick/episode_10.hdf5
|
|
||||||
|
|
||||||
检查失败：
|
|
||||||
/home/robot/ACT_Data/tomato_pick/rejected/
|
|
||||||
episode_10_<reason>_<timestamp>.hdf5
|
|
||||||
```
|
|
||||||
|
|
||||||
- 只有正式保存成功才消耗编号；
|
|
||||||
- 手动长按 Y 丢弃时关闭并删除当前临时文件，不生成拒绝文件；
|
|
||||||
- 普通质量拒绝转入 `rejected/`，不消耗正式编号；
|
|
||||||
- Ctrl+C 时尽力关闭可读 HDF5，根属性写入 `interrupted=true`，文件名原因使用
|
|
||||||
`interrupted`；
|
|
||||||
- 下次启动先处理遗留临时文件：可读文件转入 `rejected/` 并标记
|
|
||||||
`crash_recovered`，不可读文件改成带时间戳的 `.partial.hdf5` 保留；
|
|
||||||
- 拒绝原因同时写入文件名和根属性；
|
|
||||||
- 任一步出现目标文件冲突时停止保存并报警，不能覆盖或自动删除已有 episode。
|
|
||||||
|
|
||||||
写入采用单独工作线程和有界队列，ROS 回调只完成取样、对齐和入队。队列容量只需
|
|
||||||
覆盖短暂磁盘抖动，不能无限增长掩盖磁盘吞吐不足；持续积压时拒绝数据。
|
|
||||||
|
|
||||||
## 启动、配置与依赖
|
|
||||||
|
|
||||||
继续使用唯一入口 `xr_rm_bringup/launch/arm_debug.launch.py`，新增参数：
|
|
||||||
|
|
||||||
```text
|
|
||||||
record_act:=false
|
|
||||||
```
|
|
||||||
|
|
||||||
默认 `false`，现有 mock、单臂、双臂和 MuJoCo 启动行为不变。第一阶段唯一允许的
|
|
||||||
采集组合为：
|
|
||||||
|
|
||||||
```bash
|
|
||||||
ros2 launch xr_rm_bringup arm_debug.launch.py \
|
|
||||||
arm:=right use_mock:=false record_act:=true
|
|
||||||
```
|
|
||||||
|
|
||||||
`record_act:=true` 配合 `arm:=left|both` 或 `use_mock:=true` 时，在 launch 参数校验
|
|
||||||
阶段明确拒绝。ACT 采集节点退出不触发整个 launch 的 `Shutdown`，保证数据进程故障
|
|
||||||
不会终止遥操；终端必须清晰显示采集已经不可用。
|
|
||||||
|
|
||||||
新增一份专用 YAML，集中保存：
|
|
||||||
|
|
||||||
- 数据根目录和任务名；
|
|
||||||
- 两个相机序列号、分辨率和帧率；
|
|
||||||
- 30 Hz 采样率、2 秒最短时长和 60 秒最长时长；
|
|
||||||
- 相机、反馈、磁盘和时间对齐质量阈值；
|
|
||||||
- PICO 左右话题、原子采样话题和状态话题。
|
|
||||||
|
|
||||||
硬件相关阈值保留为配置项，核心 HDF5 字段顺序和 8 维语义固定，不为未来可能的
|
|
||||||
变体增加插件或通用框架。
|
|
||||||
|
|
||||||
采集节点继续由 `/home/robot/miniconda3/envs/xr/bin/python` 启动。复用该环境已有的
|
|
||||||
`pyrealsense2` 和 NumPy，只在该环境增加 HDF5 必需依赖 `h5py`；不修改系统 Python，
|
|
||||||
不新增 Conda 环境，也不增加 OpenCV 依赖。依赖缺失时节点应在打开相机或创建文件前
|
|
||||||
给出明确错误。
|
|
||||||
|
|
||||||
## 最小代码范围
|
|
||||||
|
|
||||||
预计只修改或新增以下位置：
|
|
||||||
|
|
||||||
- `xr_rm_interfaces/msg/ActControlSample.msg`：原子消息；
|
|
||||||
- `xr_rm_interfaces/CMakeLists.txt`、`package.xml`：生成并导出消息；
|
|
||||||
- `xr_rm_teleop/xr_rm_teleop/single_arm_velocity_teleop.py`：发布原子样本、跟踪夹爪
|
|
||||||
请求/成功状态和 A 键事件；
|
|
||||||
- `xr_rm_teleop/xr_rm_teleop/fun_peripheral.py`：把请求的初始工具状态明确改为完全
|
|
||||||
打开；
|
|
||||||
- `xr_rm_teleop/xr_rm_teleop/act_episode_recorder.py`：独立采集节点；
|
|
||||||
- `xr_rm_teleop/setup.py`、`package.xml`：安装入口和 ROS 运行依赖声明；
|
|
||||||
- `xr_rm_bringup/config/act_tomato_pick.yaml`：采集与硬件参数；
|
|
||||||
- `xr_rm_bringup/config/peripherals_rm75.yaml`：只为右臂启用初始化打开；
|
|
||||||
- `xr_rm_bringup/launch/arm_debug.launch.py`：默认关闭的 `record_act` 启动分支；
|
|
||||||
- 现有测试目录中的最小相关测试。
|
|
||||||
|
|
||||||
不改左臂/双臂运动参数，不改变 `left_arm_teleop`、`right_arm_teleop` 节点名，不创建
|
|
||||||
第二个相机包、训练包或数据工具包。
|
|
||||||
|
|
||||||
## 测试与验收
|
|
||||||
|
|
||||||
### 自动化验证
|
|
||||||
|
|
||||||
测试全部使用 mock、假适配器、合成相机帧和临时目录，不连接真机、不移动机械臂、
|
|
||||||
不操作真实夹爪：
|
|
||||||
|
|
||||||
- 原子消息中的 `q_actual`、QP 输出和最终 `q_target` 来自同一控制周期；
|
|
||||||
- QP 失败时记录失败并保持上次目标，不自动拒绝；
|
|
||||||
- 发送失败、夹爪失败和 A 键误触触发拒绝；
|
|
||||||
- Trigger 请求立即改变 `action[7]`，成功返回后才改变 `qpos[7]`；
|
|
||||||
- B/Y/Grip 的边沿、长按、忽略条件和所有状态转换正确；
|
|
||||||
- 从首次有效样本开始按控制序号每 3 个周期取 1 个；
|
|
||||||
- 相机只选择不晚于控制时间的最新帧，并能发现过期、偏斜和帧号异常；
|
|
||||||
- Grip 中途暂停保留，最终松开到 B 的等待段正确裁剪；
|
|
||||||
- HDF5 核心路径、形状、dtype、8 维顺序、根属性和 debug 字段正确；
|
|
||||||
- 变量长度、最短/最长限制、质量拒绝、手动丢弃和 Ctrl+C 正确；
|
|
||||||
- 编号从最大正式编号加一，拒绝不占号，已有文件不被覆盖；
|
|
||||||
- 可读和不可读崩溃残留分别按设计恢复；
|
|
||||||
- `record_act` 默认关闭，非法 arm/mock 组合被 launch 拒绝；
|
|
||||||
- mock 模式不会导入或调用 RealMan SDK、RealSense 或 HDF5 采集链路。
|
|
||||||
|
|
||||||
按照仓库要求，构建和测试从工作空间根目录执行：
|
|
||||||
|
|
||||||
```bash
|
|
||||||
cd /home/robot/WS_xr
|
|
||||||
source /opt/ros/humble/setup.bash
|
|
||||||
colcon build --symlink-install
|
|
||||||
pytest src/xr_rm_teleop/test/test_orientation_control.py
|
|
||||||
```
|
|
||||||
|
|
||||||
实施时还应运行新增测试及受影响的现有关节控制、初始位姿和外设配置测试。未看到
|
|
||||||
实际通过输出前不得声称验证通过。
|
|
||||||
|
|
||||||
### 真机手工验收
|
|
||||||
|
|
||||||
真机验收必须由用户明确授权并在现有安全检查完成后进行，至少验证：
|
|
||||||
|
|
||||||
1. 启动后右臂夹爪完全打开，状态未在命令成功前提前标记；
|
|
||||||
2. 两台相机序列号和画面角色正确，持续 30 FPS 左右；
|
|
||||||
3. B 开始、Grip 激活、B 结束、Y 丢弃和 A 误触拒绝符合状态机；
|
|
||||||
4. 正常采摘文件包含完整抓取、搬运和释放，不包含 A 键回位；
|
|
||||||
5. `qpos/action` 是有限的 `(T,8)` `float32`，图像是两路
|
|
||||||
`(T,480,640,3)` `uint8`；
|
|
||||||
6. QP 短暂失败只增加 debug 计数，成功调整后仍可完成 episode；
|
|
||||||
7. 重启后编号继续递增，丢弃和拒绝不会覆盖或占用正式编号；
|
|
||||||
8. Ctrl+C、相机断流和磁盘不足产生带明确原因的拒绝文件；
|
|
||||||
9. ACT 采集节点退出后，遥操安全链路仍按现有行为运行。
|
|
||||||
|
|
||||||
## 后续训练与推理影响
|
|
||||||
|
|
||||||
本设计生成 ALOHA/ACT 风格的核心数据，但原始 ACT 代码通常把状态维度硬编码为
|
|
||||||
双臂 14 维，并可能假设固定 episode 长度。训练阶段需要单独适配：
|
|
||||||
|
|
||||||
- `state_dim=8`；
|
|
||||||
- 两个相机名 `cam_high`、`cam_right_wrist`；
|
|
||||||
- 变量长度 episode 的 padding 和 mask；
|
|
||||||
- `chunk_size≈60`；
|
|
||||||
- 不使用 `action[t-1]` 旧补丁；
|
|
||||||
- 忽略 `/debug`，除非用于筛选或诊断。
|
|
||||||
|
|
||||||
实时推理只负责从初始位姿执行一次采摘到释放。回初始位姿继续调用当前确定性的
|
|
||||||
`rm_movej`，由未来的上层任务状态机协调，避免让一个低层策略混合两种动作接口和
|
|
||||||
任务阶段。
|
|
||||||
@@ -1,33 +0,0 @@
|
|||||||
act_episode_recorder:
|
|
||||||
ros__parameters:
|
|
||||||
output_root: /home/robot/ACT_Data
|
|
||||||
task_name: tomato_pick
|
|
||||||
control_sample_topic: /xr_rm/right_rm75/act_control_sample
|
|
||||||
right_controller_topic: /xr/right_controller
|
|
||||||
left_controller_topic: /xr/left_controller
|
|
||||||
status_topic: /act/recording_status
|
|
||||||
|
|
||||||
cam_high_serial: "234222303366"
|
|
||||||
cam_high_model: D455
|
|
||||||
cam_right_wrist_serial: "412622272532"
|
|
||||||
cam_right_wrist_model: D405
|
|
||||||
image_width: 640
|
|
||||||
image_height: 480
|
|
||||||
camera_fps: 30
|
|
||||||
camera_warmup_sec: 5.0
|
|
||||||
|
|
||||||
control_rate_hz: 90.0
|
|
||||||
sample_rate_hz: 30.0
|
|
||||||
min_samples: 60
|
|
||||||
max_samples: 1800
|
|
||||||
min_control_hz: 27.0
|
|
||||||
max_control_gap_ms: 100.0
|
|
||||||
min_camera_fps: 27.0
|
|
||||||
max_drop_ratio: 0.01
|
|
||||||
max_feedback_age_ms: 50.0
|
|
||||||
max_camera_age_ms: 50.0
|
|
||||||
max_camera_skew_ms: 50.0
|
|
||||||
min_free_space_gib: 4.0
|
|
||||||
y_hold_sec: 1.0
|
|
||||||
gripper_completion_timeout_sec: 3.0
|
|
||||||
writer_queue_size: 8
|
|
||||||
@@ -27,4 +27,3 @@ arms:
|
|||||||
scissorgripper: 0
|
scissorgripper: 0
|
||||||
right:
|
right:
|
||||||
scissorgripper: 1
|
scissorgripper: 1
|
||||||
set_initial_tool_state: true
|
|
||||||
|
|||||||
@@ -80,29 +80,6 @@ def _validate_mujoco_mode(arm: str, use_mujoco: bool) -> None:
|
|||||||
raise ValueError("use_mujoco:=true requires arm:=both")
|
raise ValueError("use_mujoco:=true requires arm:=both")
|
||||||
|
|
||||||
|
|
||||||
def _validate_act_mode(
|
|
||||||
arm: str,
|
|
||||||
use_mock: bool,
|
|
||||||
record_act: bool,
|
|
||||||
) -> None:
|
|
||||||
if record_act and (arm != "right" or use_mock):
|
|
||||||
raise ValueError(
|
|
||||||
"record_act:=true requires arm:=right use_mock:=false"
|
|
||||||
)
|
|
||||||
|
|
||||||
|
|
||||||
def _act_recorder_node() -> Node:
|
|
||||||
"""创建独立 ACT 数据采集节点；退出时不终止遥操作。"""
|
|
||||||
return Node(
|
|
||||||
package="xr_rm_teleop",
|
|
||||||
executable="act_episode_recorder",
|
|
||||||
name="act_episode_recorder",
|
|
||||||
output="screen",
|
|
||||||
prefix=[XR_PYTHON],
|
|
||||||
parameters=[_config_file("act_tomato_pick.yaml")],
|
|
||||||
)
|
|
||||||
|
|
||||||
|
|
||||||
def _single_arm_node(
|
def _single_arm_node(
|
||||||
arm: str,
|
arm: str,
|
||||||
use_mock: bool,
|
use_mock: bool,
|
||||||
@@ -187,14 +164,10 @@ def _launch_setup(context, *args, **kwargs):
|
|||||||
use_mujoco = _as_bool(
|
use_mujoco = _as_bool(
|
||||||
LaunchConfiguration("use_mujoco").perform(context)
|
LaunchConfiguration("use_mujoco").perform(context)
|
||||||
)
|
)
|
||||||
record_act = _as_bool(
|
|
||||||
LaunchConfiguration("record_act").perform(context)
|
|
||||||
)
|
|
||||||
|
|
||||||
if arm not in ("left", "right", "both"):
|
if arm not in ("left", "right", "both"):
|
||||||
raise ValueError("arm must be one of: left, right, both")
|
raise ValueError("arm must be one of: left, right, both")
|
||||||
_validate_mujoco_mode(arm, use_mujoco)
|
_validate_mujoco_mode(arm, use_mujoco)
|
||||||
_validate_act_mode(arm, use_mock, record_act)
|
|
||||||
|
|
||||||
nodes = [_udp_receiver_node()]
|
nodes = [_udp_receiver_node()]
|
||||||
if arm == "both":
|
if arm == "both":
|
||||||
@@ -203,8 +176,6 @@ def _launch_setup(context, *args, **kwargs):
|
|||||||
nodes.append(_single_arm_node(arm, use_mock))
|
nodes.append(_single_arm_node(arm, use_mock))
|
||||||
if use_mujoco:
|
if use_mujoco:
|
||||||
nodes.append(_mujoco_node())
|
nodes.append(_mujoco_node())
|
||||||
if record_act:
|
|
||||||
nodes.append(_act_recorder_node())
|
|
||||||
return nodes
|
return nodes
|
||||||
|
|
||||||
|
|
||||||
@@ -216,8 +187,6 @@ def generate_launch_description() -> LaunchDescription:
|
|||||||
DeclareLaunchArgument("use_mock", default_value="true"),
|
DeclareLaunchArgument("use_mock", default_value="true"),
|
||||||
# true 时额外启动只读 MuJoCo 双臂显示，默认不改变现有启动行为。
|
# true 时额外启动只读 MuJoCo 双臂显示，默认不改变现有启动行为。
|
||||||
DeclareLaunchArgument("use_mujoco", default_value="false"),
|
DeclareLaunchArgument("use_mujoco", default_value="false"),
|
||||||
# true 时只允许右臂真机，并启动独立 ACT 数据采集节点。
|
|
||||||
DeclareLaunchArgument("record_act", default_value="false"),
|
|
||||||
# UDP 监听参数，需要与 PICO 端或 sample_udp_sender 保持一致。
|
# UDP 监听参数，需要与 PICO 端或 sample_udp_sender 保持一致。
|
||||||
DeclareLaunchArgument("udp_host", default_value="0.0.0.0"),
|
DeclareLaunchArgument("udp_host", default_value="0.0.0.0"),
|
||||||
DeclareLaunchArgument("udp_port", default_value="15000"),
|
DeclareLaunchArgument("udp_port", default_value="15000"),
|
||||||
|
|||||||
@@ -1,2 +0,0 @@
|
|||||||
*
|
|
||||||
!.gitignore
|
|
||||||
@@ -41,37 +41,3 @@ def test_udp_receiver_exit_shuts_down_launch() -> None:
|
|||||||
receiver = arm_debug_launch._udp_receiver_node()
|
receiver = arm_debug_launch._udp_receiver_node()
|
||||||
|
|
||||||
assert isinstance(receiver._ExecuteLocal__on_exit, Shutdown)
|
assert isinstance(receiver._ExecuteLocal__on_exit, Shutdown)
|
||||||
|
|
||||||
|
|
||||||
def test_act_recording_is_disabled_by_default() -> None:
|
|
||||||
description = arm_debug_launch.generate_launch_description()
|
|
||||||
arguments = {
|
|
||||||
entity.name: entity
|
|
||||||
for entity in description.entities
|
|
||||||
if isinstance(entity, DeclareLaunchArgument)
|
|
||||||
}
|
|
||||||
|
|
||||||
assert perform_substitutions(
|
|
||||||
LaunchContext(),
|
|
||||||
arguments["record_act"].default_value,
|
|
||||||
) == "false"
|
|
||||||
|
|
||||||
|
|
||||||
@pytest.mark.parametrize(
|
|
||||||
("arm", "use_mock"),
|
|
||||||
[("left", False), ("both", False), ("right", True)],
|
|
||||||
)
|
|
||||||
def test_act_recording_rejects_unsupported_modes(arm, use_mock) -> None:
|
|
||||||
with pytest.raises(ValueError, match="arm:=right use_mock:=false"):
|
|
||||||
arm_debug_launch._validate_act_mode(arm, use_mock, True)
|
|
||||||
|
|
||||||
|
|
||||||
def test_act_recording_accepts_right_real_mode() -> None:
|
|
||||||
arm_debug_launch._validate_act_mode("right", False, True)
|
|
||||||
arm_debug_launch._validate_act_mode("both", True, False)
|
|
||||||
|
|
||||||
|
|
||||||
def test_act_recorder_exit_does_not_shutdown_teleoperation() -> None:
|
|
||||||
recorder = arm_debug_launch._act_recorder_node()
|
|
||||||
|
|
||||||
assert recorder._ExecuteLocal__on_exit is None
|
|
||||||
|
|||||||
@@ -1,76 +0,0 @@
|
|||||||
from __future__ import annotations
|
|
||||||
|
|
||||||
import importlib.util
|
|
||||||
from pathlib import Path
|
|
||||||
import sys
|
|
||||||
|
|
||||||
import pytest
|
|
||||||
|
|
||||||
|
|
||||||
MODULE_PATH = (
|
|
||||||
Path(__file__).resolve().parents[1]
|
|
||||||
/ "tools"
|
|
||||||
/ "realsense_multi_camera_test.py"
|
|
||||||
)
|
|
||||||
SPEC = importlib.util.spec_from_file_location("realsense_multi_camera_test", MODULE_PATH)
|
|
||||||
assert SPEC is not None and SPEC.loader is not None
|
|
||||||
camera_test = importlib.util.module_from_spec(SPEC)
|
|
||||||
sys.modules[SPEC.name] = camera_test
|
|
||||||
SPEC.loader.exec_module(camera_test)
|
|
||||||
|
|
||||||
|
|
||||||
def devices() -> list[camera_test.DeviceInfo]:
|
|
||||||
return [
|
|
||||||
camera_test.DeviceInfo("Intel RealSense D405", "D405", "412622272532", "3.2"),
|
|
||||||
camera_test.DeviceInfo("Intel RealSense D455", "D455", "234222303366", "3.2"),
|
|
||||||
camera_test.DeviceInfo("Intel RealSense D405", "D405", "260322272273", "3.2"),
|
|
||||||
]
|
|
||||||
|
|
||||||
|
|
||||||
def test_assigns_camera_roles_with_and_without_left_serial() -> None:
|
|
||||||
unidentified = camera_test.assign_camera_roles(devices(), None)
|
|
||||||
assert [camera.role for camera in unidentified] == ["GLOBAL", "D405-A", "D405-B"]
|
|
||||||
assert [camera.serial for camera in unidentified[1:]] == ["260322272273", "412622272532"]
|
|
||||||
|
|
||||||
identified = camera_test.assign_camera_roles(devices(), "412622272532")
|
|
||||||
assert {camera.role: camera.serial for camera in identified} == {
|
|
||||||
"GLOBAL": "234222303366",
|
|
||||||
"LEFT": "412622272532",
|
|
||||||
"RIGHT": "260322272273",
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
def test_rejects_invalid_camera_selection() -> None:
|
|
||||||
with pytest.raises(ValueError, match="左臂序列号"):
|
|
||||||
camera_test.assign_camera_roles(devices(), "missing")
|
|
||||||
|
|
||||||
with pytest.raises(ValueError, match="2 台 D405 和 1 台 D455"):
|
|
||||||
camera_test.assign_camera_roles(devices()[:-1], None)
|
|
||||||
|
|
||||||
|
|
||||||
def test_counts_frame_number_gaps() -> None:
|
|
||||||
stats = camera_test.FrameStats(target_fps=30, start_time=0.0)
|
|
||||||
stats.update(10, 0.0)
|
|
||||||
stats.update(11, 1.0 / 30.0)
|
|
||||||
stats.update(14, 2.0 / 30.0)
|
|
||||||
|
|
||||||
assert stats.received == 3
|
|
||||||
assert stats.dropped == 2
|
|
||||||
assert stats.drop_rate == pytest.approx(0.4)
|
|
||||||
assert stats.average_fps(2.0 / 30.0) == pytest.approx(30.0)
|
|
||||||
|
|
||||||
|
|
||||||
def test_snapshot_names_follow_camera_roles() -> None:
|
|
||||||
identified = camera_test.assign_camera_roles(devices(), "412622272532")
|
|
||||||
assert camera_test.snapshot_filenames(identified) == {
|
|
||||||
"234222303366": "global.png",
|
|
||||||
"412622272532": "left.png",
|
|
||||||
"260322272273": "right.png",
|
|
||||||
}
|
|
||||||
|
|
||||||
unidentified = camera_test.assign_camera_roles(devices(), None)
|
|
||||||
assert camera_test.snapshot_filenames(unidentified) == {
|
|
||||||
"234222303366": "global.png",
|
|
||||||
"260322272273": "d405_260322272273.png",
|
|
||||||
"412622272532": "d405_412622272532.png",
|
|
||||||
}
|
|
||||||
@@ -1,494 +0,0 @@
|
|||||||
#!/usr/bin/env python3
|
|
||||||
"""同时预览并检查两台 D405 和一台 D455 的彩色画面。"""
|
|
||||||
|
|
||||||
from __future__ import annotations
|
|
||||||
|
|
||||||
import argparse
|
|
||||||
from collections import deque
|
|
||||||
from dataclasses import dataclass, field
|
|
||||||
from datetime import datetime
|
|
||||||
from pathlib import Path
|
|
||||||
import threading
|
|
||||||
import time
|
|
||||||
from typing import Any
|
|
||||||
|
|
||||||
|
|
||||||
DEFAULT_WIDTH = 640
|
|
||||||
DEFAULT_HEIGHT = 480
|
|
||||||
DEFAULT_FPS = 30
|
|
||||||
DEFAULT_LEFT_SERIAL = "260322272273"
|
|
||||||
FPS_WINDOW_SECONDS = 2.0
|
|
||||||
WARMUP_SECONDS = 5.0
|
|
||||||
MAX_DROP_RATE = 0.01
|
|
||||||
MIN_FPS_RATIO = 0.9
|
|
||||||
PREVIEW_TILE_WIDTH = 640
|
|
||||||
WINDOW_NAME = "XR RM - Three RealSense Camera Test"
|
|
||||||
OUTPUT_DIR = Path(__file__).resolve().parents[1] / "test" / "camera_test_output"
|
|
||||||
|
|
||||||
|
|
||||||
@dataclass(frozen=True)
|
|
||||||
class DeviceInfo:
|
|
||||||
name: str
|
|
||||||
model: str
|
|
||||||
serial: str
|
|
||||||
usb_type: str
|
|
||||||
|
|
||||||
|
|
||||||
@dataclass(frozen=True)
|
|
||||||
class CameraAssignment:
|
|
||||||
role: str
|
|
||||||
name: str
|
|
||||||
model: str
|
|
||||||
serial: str
|
|
||||||
usb_type: str
|
|
||||||
|
|
||||||
|
|
||||||
def assign_camera_roles(
|
|
||||||
devices: list[DeviceInfo], left_serial: str | None
|
|
||||||
) -> list[CameraAssignment]:
|
|
||||||
d405 = sorted(
|
|
||||||
(device for device in devices if device.model == "D405"),
|
|
||||||
key=lambda device: device.serial,
|
|
||||||
)
|
|
||||||
d455 = [device for device in devices if device.model == "D455"]
|
|
||||||
if len(d405) != 2 or len(d455) != 1 or len(devices) != 3:
|
|
||||||
raise ValueError(
|
|
||||||
f"需要连接 2 台 D405 和 1 台 D455，当前识别到 "
|
|
||||||
f"{len(d405)} 台 D405、{len(d455)} 台 D455、共 {len(devices)} 台 RealSense"
|
|
||||||
)
|
|
||||||
|
|
||||||
for device in devices:
|
|
||||||
if not device.usb_type.startswith("3"):
|
|
||||||
raise ValueError(
|
|
||||||
f"{device.model} ({device.serial}) 当前为 USB {device.usb_type}，"
|
|
||||||
"请检查扩展坞和数据线"
|
|
||||||
)
|
|
||||||
|
|
||||||
global_camera = CameraAssignment("GLOBAL", **d455[0].__dict__)
|
|
||||||
if left_serial is None:
|
|
||||||
arms = [
|
|
||||||
CameraAssignment(f"D405-{suffix}", **device.__dict__)
|
|
||||||
for suffix, device in zip(("A", "B"), d405)
|
|
||||||
]
|
|
||||||
else:
|
|
||||||
matches = [device for device in d405 if device.serial == left_serial]
|
|
||||||
if not matches:
|
|
||||||
raise ValueError(f"左臂序列号 {left_serial} 不属于当前连接的 D405")
|
|
||||||
left = matches[0]
|
|
||||||
right = next(device for device in d405 if device.serial != left_serial)
|
|
||||||
arms = [
|
|
||||||
CameraAssignment("LEFT", **left.__dict__),
|
|
||||||
CameraAssignment("RIGHT", **right.__dict__),
|
|
||||||
]
|
|
||||||
return [global_camera, *arms]
|
|
||||||
|
|
||||||
|
|
||||||
def snapshot_filenames(assignments: list[CameraAssignment]) -> dict[str, str]:
|
|
||||||
role_names = {
|
|
||||||
"GLOBAL": "global.png",
|
|
||||||
"LEFT": "left.png",
|
|
||||||
"RIGHT": "right.png",
|
|
||||||
}
|
|
||||||
return {
|
|
||||||
camera.serial: role_names.get(camera.role, f"d405_{camera.serial}.png")
|
|
||||||
for camera in assignments
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
@dataclass
|
|
||||||
class FrameStats:
|
|
||||||
target_fps: int
|
|
||||||
start_time: float
|
|
||||||
received: int = 0
|
|
||||||
dropped: int = 0
|
|
||||||
last_frame_number: int | None = None
|
|
||||||
first_frame_time: float | None = None
|
|
||||||
recent_times: deque[float] = field(default_factory=deque)
|
|
||||||
|
|
||||||
def update(self, frame_number: int, now: float) -> None:
|
|
||||||
if self.last_frame_number is not None and frame_number > self.last_frame_number:
|
|
||||||
self.dropped += max(0, frame_number - self.last_frame_number - 1)
|
|
||||||
self.last_frame_number = frame_number
|
|
||||||
self.received += 1
|
|
||||||
if self.first_frame_time is None:
|
|
||||||
self.first_frame_time = now
|
|
||||||
self.recent_times.append(now)
|
|
||||||
cutoff = now - FPS_WINDOW_SECONDS
|
|
||||||
while self.recent_times and self.recent_times[0] < cutoff:
|
|
||||||
self.recent_times.popleft()
|
|
||||||
|
|
||||||
@property
|
|
||||||
def drop_rate(self) -> float:
|
|
||||||
expected = self.received + self.dropped
|
|
||||||
return self.dropped / expected if expected else 0.0
|
|
||||||
|
|
||||||
@property
|
|
||||||
def rolling_fps(self) -> float:
|
|
||||||
if len(self.recent_times) < 2:
|
|
||||||
return 0.0
|
|
||||||
elapsed = self.recent_times[-1] - self.recent_times[0]
|
|
||||||
return (len(self.recent_times) - 1) / elapsed if elapsed > 0 else 0.0
|
|
||||||
|
|
||||||
def average_fps(self, now: float) -> float:
|
|
||||||
if self.received < 2 or self.first_frame_time is None:
|
|
||||||
return 0.0
|
|
||||||
last_frame_time = self.recent_times[-1] if self.recent_times else now
|
|
||||||
elapsed = last_frame_time - self.first_frame_time
|
|
||||||
return (self.received - 1) / elapsed if elapsed > 0 else 0.0
|
|
||||||
|
|
||||||
|
|
||||||
@dataclass(frozen=True)
|
|
||||||
class CameraState:
|
|
||||||
frame: Any | None
|
|
||||||
actual_size: tuple[int, int]
|
|
||||||
received: int
|
|
||||||
dropped: int
|
|
||||||
drop_rate: float
|
|
||||||
rolling_fps: float
|
|
||||||
average_fps: float
|
|
||||||
elapsed: float
|
|
||||||
error: str
|
|
||||||
|
|
||||||
|
|
||||||
class CameraWorker:
|
|
||||||
def __init__(
|
|
||||||
self,
|
|
||||||
assignment: CameraAssignment,
|
|
||||||
width: int,
|
|
||||||
height: int,
|
|
||||||
fps: int,
|
|
||||||
rs: Any,
|
|
||||||
np: Any,
|
|
||||||
) -> None:
|
|
||||||
self.assignment = assignment
|
|
||||||
self.width = width
|
|
||||||
self.height = height
|
|
||||||
self.fps = fps
|
|
||||||
self._rs = rs
|
|
||||||
self._np = np
|
|
||||||
self._pipeline = rs.pipeline()
|
|
||||||
self._stop_event = threading.Event()
|
|
||||||
self._lock = threading.Lock()
|
|
||||||
self._thread: threading.Thread | None = None
|
|
||||||
self._frame: Any | None = None
|
|
||||||
self._actual_size = (width, height)
|
|
||||||
self._stats = FrameStats(fps, time.monotonic())
|
|
||||||
self._error = ""
|
|
||||||
|
|
||||||
def start(self) -> None:
|
|
||||||
config = self._rs.config()
|
|
||||||
config.enable_device(self.assignment.serial)
|
|
||||||
config.enable_stream(
|
|
||||||
self._rs.stream.color,
|
|
||||||
self.width,
|
|
||||||
self.height,
|
|
||||||
self._rs.format.bgr8,
|
|
||||||
self.fps,
|
|
||||||
)
|
|
||||||
profile = self._pipeline.start(config)
|
|
||||||
video_profile = profile.get_stream(self._rs.stream.color).as_video_stream_profile()
|
|
||||||
with self._lock:
|
|
||||||
self._actual_size = (video_profile.width(), video_profile.height())
|
|
||||||
self._stats = FrameStats(self.fps, time.monotonic())
|
|
||||||
self._thread = threading.Thread(
|
|
||||||
target=self._capture_loop,
|
|
||||||
name=f"camera-{self.assignment.serial}",
|
|
||||||
daemon=True,
|
|
||||||
)
|
|
||||||
self._thread.start()
|
|
||||||
|
|
||||||
def _capture_loop(self) -> None:
|
|
||||||
while not self._stop_event.is_set():
|
|
||||||
try:
|
|
||||||
frames = self._pipeline.wait_for_frames(timeout_ms=1000)
|
|
||||||
except RuntimeError as exc:
|
|
||||||
if self._stop_event.is_set():
|
|
||||||
return
|
|
||||||
with self._lock:
|
|
||||||
self._error = str(exc)
|
|
||||||
return
|
|
||||||
|
|
||||||
color_frame = frames.get_color_frame()
|
|
||||||
if not color_frame:
|
|
||||||
continue
|
|
||||||
frame = self._np.asanyarray(color_frame.get_data()).copy()
|
|
||||||
now = time.monotonic()
|
|
||||||
with self._lock:
|
|
||||||
self._frame = frame
|
|
||||||
self._stats.update(color_frame.get_frame_number(), now)
|
|
||||||
|
|
||||||
def state(self, now: float) -> CameraState:
|
|
||||||
with self._lock:
|
|
||||||
return CameraState(
|
|
||||||
frame=self._frame,
|
|
||||||
actual_size=self._actual_size,
|
|
||||||
received=self._stats.received,
|
|
||||||
dropped=self._stats.dropped,
|
|
||||||
drop_rate=self._stats.drop_rate,
|
|
||||||
rolling_fps=self._stats.rolling_fps,
|
|
||||||
average_fps=self._stats.average_fps(now),
|
|
||||||
elapsed=now - self._stats.start_time,
|
|
||||||
error=self._error,
|
|
||||||
)
|
|
||||||
|
|
||||||
def stop(self) -> None:
|
|
||||||
self._stop_event.set()
|
|
||||||
if self._thread is not None:
|
|
||||||
self._thread.join(timeout=1.2)
|
|
||||||
try:
|
|
||||||
self._pipeline.stop()
|
|
||||||
except RuntimeError:
|
|
||||||
pass
|
|
||||||
if self._thread is not None and self._thread.is_alive():
|
|
||||||
self._thread.join(timeout=1.0)
|
|
||||||
|
|
||||||
|
|
||||||
def load_runtime_dependencies() -> tuple[Any, Any, Any]:
|
|
||||||
try:
|
|
||||||
import cv2
|
|
||||||
import numpy as np
|
|
||||||
import pyrealsense2 as rs
|
|
||||||
except ImportError as exc:
|
|
||||||
raise RuntimeError(
|
|
||||||
"缺少相机测试依赖。请使用 /home/robot/miniconda3/envs/xr/bin/python "
|
|
||||||
"运行，并确认 xr 环境已安装 pyrealsense2、numpy 和 opencv-python。"
|
|
||||||
) from exc
|
|
||||||
return cv2, np, rs
|
|
||||||
|
|
||||||
|
|
||||||
def enumerate_devices(rs: Any) -> list[DeviceInfo]:
|
|
||||||
devices = []
|
|
||||||
for device in rs.context().query_devices():
|
|
||||||
name = device.get_info(rs.camera_info.name)
|
|
||||||
if "D405" in name:
|
|
||||||
model = "D405"
|
|
||||||
elif "D455" in name:
|
|
||||||
model = "D455"
|
|
||||||
else:
|
|
||||||
model = name
|
|
||||||
usb_type = (
|
|
||||||
device.get_info(rs.camera_info.usb_type_descriptor)
|
|
||||||
if device.supports(rs.camera_info.usb_type_descriptor)
|
|
||||||
else "unknown"
|
|
||||||
)
|
|
||||||
devices.append(
|
|
||||||
DeviceInfo(
|
|
||||||
name=name,
|
|
||||||
model=model,
|
|
||||||
serial=device.get_info(rs.camera_info.serial_number),
|
|
||||||
usb_type=usb_type,
|
|
||||||
)
|
|
||||||
)
|
|
||||||
return devices
|
|
||||||
|
|
||||||
|
|
||||||
def camera_status(state: CameraState, target_fps: int) -> tuple[str, tuple[int, int, int]]:
|
|
||||||
if state.error:
|
|
||||||
return "ERROR", (0, 0, 255)
|
|
||||||
if state.received == 0:
|
|
||||||
return "WAITING", (0, 215, 255)
|
|
||||||
if state.elapsed < WARMUP_SECONDS:
|
|
||||||
return "WARMUP", (0, 215, 255)
|
|
||||||
if state.rolling_fps >= target_fps * MIN_FPS_RATIO and state.drop_rate <= MAX_DROP_RATE:
|
|
||||||
return "PASS", (0, 200, 0)
|
|
||||||
return "FAIL", (0, 0, 255)
|
|
||||||
|
|
||||||
|
|
||||||
def render_tile(
|
|
||||||
worker: CameraWorker,
|
|
||||||
state: CameraState,
|
|
||||||
tile_width: int,
|
|
||||||
tile_height: int,
|
|
||||||
cv2: Any,
|
|
||||||
np: Any,
|
|
||||||
) -> Any:
|
|
||||||
if state.frame is None:
|
|
||||||
tile = np.zeros((tile_height, tile_width, 3), dtype=np.uint8)
|
|
||||||
else:
|
|
||||||
tile = cv2.resize(state.frame, (tile_width, tile_height))
|
|
||||||
|
|
||||||
status, color = camera_status(state, worker.fps)
|
|
||||||
cv2.rectangle(tile, (0, 0), (tile_width, 100), (0, 0, 0), -1)
|
|
||||||
width, height = state.actual_size
|
|
||||||
lines = [
|
|
||||||
f"{worker.assignment.role} {worker.assignment.model} {worker.assignment.serial}",
|
|
||||||
f"USB {worker.assignment.usb_type} {width}x{height}@{worker.fps}",
|
|
||||||
f"FPS {state.rolling_fps:.1f} Frames {state.received} "
|
|
||||||
f"Dropped {state.dropped} ({state.drop_rate:.2%})",
|
|
||||||
status if not state.error else f"ERROR: {state.error[:70]}",
|
|
||||||
]
|
|
||||||
for index, line in enumerate(lines):
|
|
||||||
cv2.putText(
|
|
||||||
tile,
|
|
||||||
line,
|
|
||||||
(10, 22 + index * 24),
|
|
||||||
cv2.FONT_HERSHEY_SIMPLEX,
|
|
||||||
0.55,
|
|
||||||
color if index == len(lines) - 1 else (255, 255, 255),
|
|
||||||
1,
|
|
||||||
cv2.LINE_AA,
|
|
||||||
)
|
|
||||||
return tile
|
|
||||||
|
|
||||||
|
|
||||||
def compose_preview(
|
|
||||||
workers: list[CameraWorker],
|
|
||||||
states: dict[str, CameraState],
|
|
||||||
capture_width: int,
|
|
||||||
capture_height: int,
|
|
||||||
cv2: Any,
|
|
||||||
np: Any,
|
|
||||||
) -> Any:
|
|
||||||
tile_width = min(capture_width, PREVIEW_TILE_WIDTH)
|
|
||||||
tile_height = round(tile_width * capture_height / capture_width)
|
|
||||||
tiles = {
|
|
||||||
worker.assignment.serial: render_tile(
|
|
||||||
worker,
|
|
||||||
states[worker.assignment.serial],
|
|
||||||
tile_width,
|
|
||||||
tile_height,
|
|
||||||
cv2,
|
|
||||||
np,
|
|
||||||
)
|
|
||||||
for worker in workers
|
|
||||||
}
|
|
||||||
global_worker = next(worker for worker in workers if worker.assignment.role == "GLOBAL")
|
|
||||||
arm_workers = [worker for worker in workers if worker.assignment.role != "GLOBAL"]
|
|
||||||
|
|
||||||
top = np.zeros((tile_height, tile_width * 2, 3), dtype=np.uint8)
|
|
||||||
offset = tile_width // 2
|
|
||||||
top[:, offset : offset + tile_width] = tiles[global_worker.assignment.serial]
|
|
||||||
bottom = np.hstack([tiles[worker.assignment.serial] for worker in arm_workers])
|
|
||||||
return np.vstack((top, bottom))
|
|
||||||
|
|
||||||
|
|
||||||
def save_snapshots(
|
|
||||||
assignments: list[CameraAssignment],
|
|
||||||
states: dict[str, CameraState],
|
|
||||||
cv2: Any,
|
|
||||||
) -> Path:
|
|
||||||
missing = [camera.role for camera in assignments if states[camera.serial].frame is None]
|
|
||||||
if missing:
|
|
||||||
raise RuntimeError(f"以下相机尚无有效画面，不能保存快照: {', '.join(missing)}")
|
|
||||||
|
|
||||||
timestamp = datetime.now().strftime("%Y%m%d_%H%M%S_%f")[:-3]
|
|
||||||
snapshot_dir = OUTPUT_DIR / timestamp
|
|
||||||
snapshot_dir.mkdir(parents=True, exist_ok=False)
|
|
||||||
filenames = snapshot_filenames(assignments)
|
|
||||||
for camera in assignments:
|
|
||||||
path = snapshot_dir / filenames[camera.serial]
|
|
||||||
if not cv2.imwrite(str(path), states[camera.serial].frame):
|
|
||||||
raise RuntimeError(f"保存快照失败: {path}")
|
|
||||||
return snapshot_dir
|
|
||||||
|
|
||||||
|
|
||||||
def print_summary(workers: list[CameraWorker]) -> bool:
|
|
||||||
now = time.monotonic()
|
|
||||||
print("\n相机测试汇总:")
|
|
||||||
passed = True
|
|
||||||
for worker in workers:
|
|
||||||
state = worker.state(now)
|
|
||||||
status, _color = camera_status(state, worker.fps)
|
|
||||||
passed = passed and status == "PASS"
|
|
||||||
print(
|
|
||||||
f" {worker.assignment.role:<7} {worker.assignment.serial}: "
|
|
||||||
f"平均 {state.average_fps:.1f} FPS, 接收 {state.received}, "
|
|
||||||
f"掉帧 {state.dropped} ({state.drop_rate:.2%}), {status}"
|
|
||||||
)
|
|
||||||
print("结论: " + ("三路链路满足当前阈值" if passed else "至少一路未满足当前阈值"))
|
|
||||||
return passed
|
|
||||||
|
|
||||||
|
|
||||||
def parse_args() -> argparse.Namespace:
|
|
||||||
parser = argparse.ArgumentParser(description=__doc__)
|
|
||||||
parser.add_argument("--width", type=int, default=DEFAULT_WIDTH, help="采集宽度")
|
|
||||||
parser.add_argument("--height", type=int, default=DEFAULT_HEIGHT, help="采集高度")
|
|
||||||
parser.add_argument("--fps", type=int, default=DEFAULT_FPS, help="目标帧率")
|
|
||||||
parser.add_argument(
|
|
||||||
"--left-serial",
|
|
||||||
default=DEFAULT_LEFT_SERIAL,
|
|
||||||
help=f"左臂 D405 的 RealSense 序列号（默认: {DEFAULT_LEFT_SERIAL}）",
|
|
||||||
)
|
|
||||||
args = parser.parse_args()
|
|
||||||
if args.width <= 0 or args.height <= 0 or args.fps <= 0:
|
|
||||||
parser.error("width、height 和 fps 必须为正数")
|
|
||||||
return args
|
|
||||||
|
|
||||||
|
|
||||||
def main() -> int:
|
|
||||||
args = parse_args()
|
|
||||||
try:
|
|
||||||
cv2, np, rs = load_runtime_dependencies()
|
|
||||||
assignments = assign_camera_roles(enumerate_devices(rs), args.left_serial)
|
|
||||||
except RuntimeError as exc:
|
|
||||||
print(f"错误: {exc}")
|
|
||||||
return 2
|
|
||||||
except ValueError as exc:
|
|
||||||
print(f"设备检查失败: {exc}")
|
|
||||||
return 2
|
|
||||||
|
|
||||||
print("相机分配:")
|
|
||||||
for camera in assignments:
|
|
||||||
print(
|
|
||||||
f" {camera.role:<7} {camera.model} serial={camera.serial} "
|
|
||||||
f"USB={camera.usb_type}"
|
|
||||||
)
|
|
||||||
|
|
||||||
workers: list[CameraWorker] = []
|
|
||||||
passed = False
|
|
||||||
try:
|
|
||||||
for assignment in assignments:
|
|
||||||
worker = CameraWorker(
|
|
||||||
assignment,
|
|
||||||
args.width,
|
|
||||||
args.height,
|
|
||||||
args.fps,
|
|
||||||
rs,
|
|
||||||
np,
|
|
||||||
)
|
|
||||||
workers.append(worker)
|
|
||||||
worker.start()
|
|
||||||
|
|
||||||
cv2.namedWindow(WINDOW_NAME, cv2.WINDOW_NORMAL)
|
|
||||||
print("按 S 保存三路快照，按 Q 或 Esc 退出。")
|
|
||||||
while True:
|
|
||||||
now = time.monotonic()
|
|
||||||
states = {worker.assignment.serial: worker.state(now) for worker in workers}
|
|
||||||
preview = compose_preview(
|
|
||||||
workers,
|
|
||||||
states,
|
|
||||||
args.width,
|
|
||||||
args.height,
|
|
||||||
cv2,
|
|
||||||
np,
|
|
||||||
)
|
|
||||||
cv2.imshow(WINDOW_NAME, preview)
|
|
||||||
key = cv2.waitKey(1) & 0xFF
|
|
||||||
if key in (ord("q"), ord("Q"), 27):
|
|
||||||
break
|
|
||||||
if key in (ord("s"), ord("S")):
|
|
||||||
try:
|
|
||||||
output = save_snapshots(assignments, states, cv2)
|
|
||||||
print(f"快照已保存: {output}")
|
|
||||||
except RuntimeError as exc:
|
|
||||||
print(f"快照失败: {exc}")
|
|
||||||
if cv2.getWindowProperty(WINDOW_NAME, cv2.WND_PROP_VISIBLE) < 1:
|
|
||||||
break
|
|
||||||
except KeyboardInterrupt:
|
|
||||||
print("\n收到 Ctrl+C，正在停止相机。")
|
|
||||||
except Exception as exc:
|
|
||||||
print(f"相机启动或显示失败: {exc}")
|
|
||||||
finally:
|
|
||||||
for worker in reversed(workers):
|
|
||||||
worker.stop()
|
|
||||||
try:
|
|
||||||
cv2.destroyAllWindows()
|
|
||||||
except Exception:
|
|
||||||
pass
|
|
||||||
if workers:
|
|
||||||
passed = print_summary(workers)
|
|
||||||
return 0 if passed else 1
|
|
||||||
|
|
||||||
|
|
||||||
if __name__ == "__main__":
|
|
||||||
raise SystemExit(main())
|
|
||||||
@@ -11,7 +11,6 @@ find_package(rosidl_default_generators REQUIRED)
|
|||||||
find_package(std_msgs REQUIRED)
|
find_package(std_msgs REQUIRED)
|
||||||
|
|
||||||
rosidl_generate_interfaces(${PROJECT_NAME}
|
rosidl_generate_interfaces(${PROJECT_NAME}
|
||||||
"msg/ActControlSample.msg"
|
|
||||||
"msg/XrController.msg"
|
"msg/XrController.msg"
|
||||||
DEPENDENCIES geometry_msgs std_msgs
|
DEPENDENCIES geometry_msgs std_msgs
|
||||||
)
|
)
|
||||||
|
|||||||
@@ -1,41 +0,0 @@
|
|||||||
std_msgs/Header header
|
|
||||||
uint64 control_seq
|
|
||||||
int64 control_monotonic_ns
|
|
||||||
int64 feedback_monotonic_ns
|
|
||||||
int64 action_monotonic_ns
|
|
||||||
|
|
||||||
float32 feedback_age_ms
|
|
||||||
float32 qp_duration_ms
|
|
||||||
|
|
||||||
float64[7] q_actual
|
|
||||||
float64[7] q_qp_raw
|
|
||||||
float64[7] q_target
|
|
||||||
float64[7] joint_lower_limits
|
|
||||||
float64[7] joint_upper_limits
|
|
||||||
|
|
||||||
geometry_msgs/Pose tcp_current
|
|
||||||
geometry_msgs/Pose tcp_raw_target
|
|
||||||
geometry_msgs/Pose tcp_target
|
|
||||||
geometry_msgs/Twist tcp_command_velocity
|
|
||||||
geometry_msgs/Pose pico_pose
|
|
||||||
|
|
||||||
bool pico_grip
|
|
||||||
float32 pico_trigger
|
|
||||||
bool pico_primary
|
|
||||||
bool pico_secondary
|
|
||||||
float32[2] pico_axis
|
|
||||||
|
|
||||||
bool gripper_target_open
|
|
||||||
bool gripper_state_open
|
|
||||||
bool gripper_state_known
|
|
||||||
bool gripper_command_pending
|
|
||||||
bool gripper_command_failed
|
|
||||||
|
|
||||||
bool teleop_active
|
|
||||||
bool feedback_valid
|
|
||||||
bool action_valid
|
|
||||||
bool command_sent
|
|
||||||
bool qp_attempted
|
|
||||||
bool qp_success
|
|
||||||
bool target_clamped
|
|
||||||
bool control_fault
|
|
||||||
@@ -55,9 +55,7 @@ setup(
|
|||||||
tests_require=["pytest"],
|
tests_require=["pytest"],
|
||||||
entry_points={
|
entry_points={
|
||||||
"console_scripts": [
|
"console_scripts": [
|
||||||
"act_episode_recorder = xr_rm_teleop.act_episode_recorder:main",
|
"single_arm_velocity_teleop = xr_rm_teleop.single_arm_velocity_teleop:main",
|
||||||
"single_arm_velocity_teleop = "
|
|
||||||
"xr_rm_teleop.single_arm_velocity_teleop:main",
|
|
||||||
],
|
],
|
||||||
},
|
},
|
||||||
)
|
)
|
||||||
|
|||||||
@@ -1,194 +0,0 @@
|
|||||||
from types import SimpleNamespace
|
|
||||||
|
|
||||||
import numpy as np
|
|
||||||
import pytest
|
|
||||||
from builtin_interfaces.msg import Time as TimeMsg
|
|
||||||
|
|
||||||
from xr_rm_interfaces.msg import XrController
|
|
||||||
from xr_rm_teleop.single_arm_velocity_teleop import (
|
|
||||||
SingleArmVelocityTeleop,
|
|
||||||
_ActCycleContext,
|
|
||||||
)
|
|
||||||
|
|
||||||
|
|
||||||
class FakePublisher:
|
|
||||||
def __init__(self, error=None) -> None:
|
|
||||||
self.error = error
|
|
||||||
self.messages = []
|
|
||||||
|
|
||||||
def publish(self, message) -> None:
|
|
||||||
if self.error is not None:
|
|
||||||
raise self.error
|
|
||||||
self.messages.append(message)
|
|
||||||
|
|
||||||
|
|
||||||
class FakeLogger:
|
|
||||||
def __init__(self) -> None:
|
|
||||||
self.warnings = []
|
|
||||||
|
|
||||||
def warn(self, message, **kwargs) -> None:
|
|
||||||
del kwargs
|
|
||||||
self.warnings.append(message)
|
|
||||||
|
|
||||||
|
|
||||||
def _controller(*, grip=True) -> XrController:
|
|
||||||
message = XrController()
|
|
||||||
message.hand = "right"
|
|
||||||
message.grip = grip
|
|
||||||
message.trigger = 0.25
|
|
||||||
message.primary = False
|
|
||||||
message.secondary = False
|
|
||||||
message.axis = [0.1, -0.2]
|
|
||||||
message.pose.orientation.w = 1.0
|
|
||||||
return message
|
|
||||||
|
|
||||||
|
|
||||||
def _teleop(*, last_target=None, tool_state=True):
|
|
||||||
teleop = object.__new__(SingleArmVelocityTeleop)
|
|
||||||
teleop._arm_name = "right_rm75"
|
|
||||||
teleop._last_msg = _controller()
|
|
||||||
teleop._active = True
|
|
||||||
teleop._control_fault_latched = False
|
|
||||||
teleop._last_current_pose = np.eye(4)
|
|
||||||
teleop._robot_start_transform = None
|
|
||||||
teleop._last_sent_target = None
|
|
||||||
teleop._last_sent_orientation = None
|
|
||||||
teleop._last_successful_action_target = last_target
|
|
||||||
teleop._ik_solver = SimpleNamespace(
|
|
||||||
joint_position_limits=np.asarray([[-1.0, 1.0]] * 7)
|
|
||||||
)
|
|
||||||
teleop._tool_state_snapshot = lambda: (
|
|
||||||
True,
|
|
||||||
tool_state,
|
|
||||||
False,
|
|
||||||
False,
|
|
||||||
)
|
|
||||||
teleop.get_clock = lambda: SimpleNamespace(
|
|
||||||
now=lambda: SimpleNamespace(to_msg=lambda: TimeMsg())
|
|
||||||
)
|
|
||||||
teleop.get_logger = lambda: FakeLogger()
|
|
||||||
return teleop
|
|
||||||
|
|
||||||
|
|
||||||
def _cycle(**overrides) -> _ActCycleContext:
|
|
||||||
values = {
|
|
||||||
"control_seq": 100,
|
|
||||||
"control_monotonic_ns": 1_000_000_000,
|
|
||||||
"feedback_monotonic_ns": 990_000_000,
|
|
||||||
"action_monotonic_ns": 1_005_000_000,
|
|
||||||
"feedback_age_ms": 10.0,
|
|
||||||
"q_actual": [0.1] * 7,
|
|
||||||
"q_qp_raw": [0.3] * 7,
|
|
||||||
"q_target": [0.2] * 7,
|
|
||||||
"current_pose": np.eye(4),
|
|
||||||
"raw_target_pose": np.eye(4),
|
|
||||||
"target_pose": np.eye(4),
|
|
||||||
"command_velocity": [0.0] * 6,
|
|
||||||
"feedback_valid": True,
|
|
||||||
"command_sent": True,
|
|
||||||
"qp_attempted": True,
|
|
||||||
"qp_success": True,
|
|
||||||
}
|
|
||||||
values.update(overrides)
|
|
||||||
return _ActCycleContext(**values)
|
|
||||||
|
|
||||||
|
|
||||||
def test_act_sample_uses_feedback_and_limited_target_from_one_cycle() -> None:
|
|
||||||
teleop = _teleop(last_target=[0.2] * 7)
|
|
||||||
|
|
||||||
message = teleop._build_act_control_sample(_cycle())
|
|
||||||
|
|
||||||
assert message.control_seq == 100
|
|
||||||
assert message.q_actual == pytest.approx([0.1] * 7)
|
|
||||||
assert message.q_qp_raw == pytest.approx([0.3] * 7)
|
|
||||||
assert message.q_target == pytest.approx([0.2] * 7)
|
|
||||||
assert message.joint_lower_limits == pytest.approx([-1.0] * 7)
|
|
||||||
assert message.joint_upper_limits == pytest.approx([1.0] * 7)
|
|
||||||
assert message.command_sent
|
|
||||||
assert message.action_valid
|
|
||||||
assert message.qp_attempted
|
|
||||||
assert message.qp_success
|
|
||||||
|
|
||||||
|
|
||||||
def test_act_sample_marks_qp_fallback_as_valid_held_action() -> None:
|
|
||||||
teleop = _teleop(last_target=[0.2] * 7)
|
|
||||||
cycle = _cycle(
|
|
||||||
q_qp_raw=[0.2] * 7,
|
|
||||||
q_target=[0.2] * 7,
|
|
||||||
qp_success=False,
|
|
||||||
)
|
|
||||||
|
|
||||||
message = teleop._build_act_control_sample(cycle)
|
|
||||||
|
|
||||||
assert message.q_target == pytest.approx([0.2] * 7)
|
|
||||||
assert message.action_valid
|
|
||||||
assert message.qp_attempted
|
|
||||||
assert not message.qp_success
|
|
||||||
|
|
||||||
|
|
||||||
def test_act_sample_holds_last_action_while_grip_is_released() -> None:
|
|
||||||
teleop = _teleop(last_target=[0.4] * 7)
|
|
||||||
teleop._last_msg = _controller(grip=False)
|
|
||||||
teleop._active = False
|
|
||||||
cycle = _cycle(
|
|
||||||
q_qp_raw=None,
|
|
||||||
q_target=None,
|
|
||||||
command_sent=False,
|
|
||||||
qp_attempted=False,
|
|
||||||
qp_success=False,
|
|
||||||
action_monotonic_ns=-1,
|
|
||||||
)
|
|
||||||
|
|
||||||
message = teleop._build_act_control_sample(cycle)
|
|
||||||
|
|
||||||
assert message.q_target == pytest.approx([0.4] * 7)
|
|
||||||
assert message.action_valid
|
|
||||||
assert not message.command_sent
|
|
||||||
assert not message.teleop_active
|
|
||||||
|
|
||||||
|
|
||||||
def test_act_sample_marks_send_failure_invalid() -> None:
|
|
||||||
teleop = _teleop(last_target=[0.4] * 7)
|
|
||||||
|
|
||||||
message = teleop._build_act_control_sample(
|
|
||||||
_cycle(send_failed=True, command_sent=False)
|
|
||||||
)
|
|
||||||
|
|
||||||
assert not message.action_valid
|
|
||||||
|
|
||||||
|
|
||||||
def test_act_sample_marks_unknown_gripper_state() -> None:
|
|
||||||
teleop = _teleop(last_target=[0.2] * 7, tool_state=None)
|
|
||||||
|
|
||||||
message = teleop._build_act_control_sample(_cycle())
|
|
||||||
|
|
||||||
assert not message.gripper_state_known
|
|
||||||
|
|
||||||
|
|
||||||
def test_act_sample_publish_failure_does_not_escape_control_path() -> None:
|
|
||||||
teleop = _teleop(last_target=[0.2] * 7)
|
|
||||||
logger = FakeLogger()
|
|
||||||
teleop._act_sample_pub = FakePublisher(RuntimeError("dds failed"))
|
|
||||||
teleop.get_logger = lambda: logger
|
|
||||||
|
|
||||||
teleop._publish_act_control_sample(_cycle())
|
|
||||||
|
|
||||||
assert logger.warnings == [
|
|
||||||
"right_rm75 ACT原子样本发布失败：dds failed"
|
|
||||||
]
|
|
||||||
|
|
||||||
|
|
||||||
def test_control_tick_wraps_one_impl_call_in_one_atomic_sample() -> None:
|
|
||||||
teleop = object.__new__(SingleArmVelocityTeleop)
|
|
||||||
cycles = []
|
|
||||||
published = []
|
|
||||||
teleop._act_control_seq = 7
|
|
||||||
teleop._control_tick_impl = lambda cycle: cycles.append(cycle)
|
|
||||||
teleop._publish_act_control_sample = lambda cycle: published.append(cycle)
|
|
||||||
|
|
||||||
teleop._control_tick()
|
|
||||||
|
|
||||||
assert len(cycles) == 1
|
|
||||||
assert published == cycles
|
|
||||||
assert cycles[0].control_seq == 7
|
|
||||||
assert teleop._act_control_seq == 8
|
|
||||||
@@ -1,882 +0,0 @@
|
|||||||
import queue
|
|
||||||
import threading
|
|
||||||
from types import SimpleNamespace
|
|
||||||
|
|
||||||
import numpy as np
|
|
||||||
import pytest
|
|
||||||
|
|
||||||
try:
|
|
||||||
import h5py
|
|
||||||
except ImportError:
|
|
||||||
h5py = None
|
|
||||||
|
|
||||||
from xr_rm_interfaces.msg import ActControlSample, XrController
|
|
||||||
from xr_rm_teleop.act_episode_recorder import (
|
|
||||||
NO_ACTION,
|
|
||||||
ActEpisodeRecorder,
|
|
||||||
ButtonTracker,
|
|
||||||
CameraBuffer,
|
|
||||||
CameraFrame,
|
|
||||||
EpisodeMetadata,
|
|
||||||
EpisodeStore,
|
|
||||||
EpisodeWriter,
|
|
||||||
QualityError,
|
|
||||||
QualityLimits,
|
|
||||||
RecordingSession,
|
|
||||||
RecordingState,
|
|
||||||
TaskDirectoryLock,
|
|
||||||
discard_partial,
|
|
||||||
next_episode_index,
|
|
||||||
publish_without_overwrite,
|
|
||||||
recover_partial_files,
|
|
||||||
select_camera_pair,
|
|
||||||
select_frame,
|
|
||||||
validate_episode,
|
|
||||||
)
|
|
||||||
|
|
||||||
|
|
||||||
def _recording_session(*, origin_seq=10, max_samples=1800):
|
|
||||||
session = RecordingSession(max_samples=max_samples)
|
|
||||||
session.arm()
|
|
||||||
decision = session.on_control(
|
|
||||||
origin_seq,
|
|
||||||
grip=True,
|
|
||||||
action_valid=True,
|
|
||||||
command_sent=True,
|
|
||||||
)
|
|
||||||
assert decision.record_sample
|
|
||||||
return session
|
|
||||||
|
|
||||||
|
|
||||||
def test_recording_starts_on_first_sent_grip_action_and_downsamples():
|
|
||||||
session = RecordingSession(max_samples=1800)
|
|
||||||
session.arm()
|
|
||||||
|
|
||||||
assert session.on_control(
|
|
||||||
100,
|
|
||||||
grip=False,
|
|
||||||
action_valid=True,
|
|
||||||
command_sent=False,
|
|
||||||
) == NO_ACTION
|
|
||||||
assert session.on_control(
|
|
||||||
101,
|
|
||||||
grip=True,
|
|
||||||
action_valid=True,
|
|
||||||
command_sent=False,
|
|
||||||
) == NO_ACTION
|
|
||||||
first = session.on_control(
|
|
||||||
102,
|
|
||||||
grip=True,
|
|
||||||
action_valid=True,
|
|
||||||
command_sent=True,
|
|
||||||
)
|
|
||||||
second = session.on_control(
|
|
||||||
103,
|
|
||||||
grip=True,
|
|
||||||
action_valid=True,
|
|
||||||
command_sent=True,
|
|
||||||
)
|
|
||||||
session.on_control(
|
|
||||||
104,
|
|
||||||
grip=True,
|
|
||||||
action_valid=True,
|
|
||||||
command_sent=True,
|
|
||||||
)
|
|
||||||
third = session.on_control(
|
|
||||||
105,
|
|
||||||
grip=True,
|
|
||||||
action_valid=True,
|
|
||||||
command_sent=True,
|
|
||||||
)
|
|
||||||
|
|
||||||
assert first.record_sample
|
|
||||||
assert not second.record_sample
|
|
||||||
assert third.record_sample
|
|
||||||
assert session.sample_origin_seq == 102
|
|
||||||
|
|
||||||
|
|
||||||
def test_final_grip_release_marks_crop_point_but_mid_pause_is_kept():
|
|
||||||
session = _recording_session(origin_seq=10)
|
|
||||||
session.on_control(11, grip=True, action_valid=True, command_sent=True)
|
|
||||||
session.on_control(12, grip=True, action_valid=True, command_sent=True)
|
|
||||||
session.on_control(13, grip=False, action_valid=True, command_sent=False)
|
|
||||||
first_crop = session.candidate_end_count
|
|
||||||
|
|
||||||
assert first_crop == 2
|
|
||||||
|
|
||||||
session.on_control(14, grip=True, action_valid=True, command_sent=False)
|
|
||||||
assert session.candidate_end_count is None
|
|
||||||
session.on_control(15, grip=True, action_valid=True, command_sent=True)
|
|
||||||
session.on_control(16, grip=False, action_valid=True, command_sent=False)
|
|
||||||
|
|
||||||
assert session.candidate_end_count == 3
|
|
||||||
|
|
||||||
|
|
||||||
def test_finish_waits_for_control_sample_after_b_request():
|
|
||||||
session = _recording_session(origin_seq=10)
|
|
||||||
session.on_control(11, grip=False, action_valid=True, command_sent=False)
|
|
||||||
session.request_finish()
|
|
||||||
|
|
||||||
decision = session.on_control(
|
|
||||||
12,
|
|
||||||
grip=False,
|
|
||||||
action_valid=True,
|
|
||||||
command_sent=False,
|
|
||||||
)
|
|
||||||
|
|
||||||
assert decision.finish
|
|
||||||
assert session.candidate_end_count == 1
|
|
||||||
|
|
||||||
|
|
||||||
def test_missing_control_sequence_rejects_recording():
|
|
||||||
session = _recording_session(origin_seq=10)
|
|
||||||
session.on_control(11, grip=True, action_valid=True, command_sent=True)
|
|
||||||
|
|
||||||
decision = session.on_control(
|
|
||||||
13,
|
|
||||||
grip=True,
|
|
||||||
action_valid=True,
|
|
||||||
command_sent=True,
|
|
||||||
)
|
|
||||||
|
|
||||||
assert decision.reject_reason == "control_sequence_gap"
|
|
||||||
|
|
||||||
|
|
||||||
def test_max_samples_rejects_without_stopping_robot():
|
|
||||||
session = _recording_session(origin_seq=10, max_samples=2)
|
|
||||||
session.on_control(11, grip=True, action_valid=True, command_sent=True)
|
|
||||||
session.on_control(12, grip=True, action_valid=True, command_sent=True)
|
|
||||||
|
|
||||||
decision = session.on_control(
|
|
||||||
13,
|
|
||||||
grip=True,
|
|
||||||
action_valid=True,
|
|
||||||
command_sent=True,
|
|
||||||
)
|
|
||||||
|
|
||||||
assert decision.reject_reason == "max_duration"
|
|
||||||
|
|
||||||
|
|
||||||
def test_right_b_is_ignored_while_grip_is_pressed():
|
|
||||||
tracker = ButtonTracker(hold_ns=1_000_000_000)
|
|
||||||
tracker.on_right(False, False, False, 0, RecordingState.IDLE)
|
|
||||||
|
|
||||||
events = tracker.on_right(
|
|
||||||
False,
|
|
||||||
True,
|
|
||||||
True,
|
|
||||||
1,
|
|
||||||
RecordingState.IDLE,
|
|
||||||
)
|
|
||||||
|
|
||||||
assert not events.right_b
|
|
||||||
|
|
||||||
|
|
||||||
def test_left_y_requires_new_press_inside_active_recording_state():
|
|
||||||
tracker = ButtonTracker(hold_ns=1_000_000_000)
|
|
||||||
tracker.on_left(True, 0, RecordingState.IDLE)
|
|
||||||
assert not tracker.on_left(
|
|
||||||
True,
|
|
||||||
2_000_000_000,
|
|
||||||
RecordingState.RECORDING,
|
|
||||||
).discard
|
|
||||||
tracker.on_left(False, 2_100_000_000, RecordingState.RECORDING)
|
|
||||||
tracker.on_left(True, 3_000_000_000, RecordingState.RECORDING)
|
|
||||||
|
|
||||||
assert not tracker.on_left(
|
|
||||||
True,
|
|
||||||
3_999_999_999,
|
|
||||||
RecordingState.RECORDING,
|
|
||||||
).discard
|
|
||||||
assert tracker.on_left(
|
|
||||||
True,
|
|
||||||
4_000_000_000,
|
|
||||||
RecordingState.RECORDING,
|
|
||||||
).discard
|
|
||||||
assert not tracker.on_left(
|
|
||||||
True,
|
|
||||||
5_000_000_000,
|
|
||||||
RecordingState.RECORDING,
|
|
||||||
).discard
|
|
||||||
|
|
||||||
|
|
||||||
def test_right_a_reports_recording_rejection_event():
|
|
||||||
tracker = ButtonTracker(hold_ns=1_000_000_000)
|
|
||||||
tracker.on_right(False, False, False, 0, RecordingState.RECORDING)
|
|
||||||
|
|
||||||
events = tracker.on_right(
|
|
||||||
True,
|
|
||||||
False,
|
|
||||||
False,
|
|
||||||
1,
|
|
||||||
RecordingState.RECORDING,
|
|
||||||
)
|
|
||||||
|
|
||||||
assert events.reject_reason == "initial_pose_command_during_episode"
|
|
||||||
|
|
||||||
|
|
||||||
def _image(value, *, shape=(480, 640, 3), dtype=np.uint8):
|
|
||||||
return np.full(shape, value, dtype=dtype)
|
|
||||||
|
|
||||||
|
|
||||||
def test_select_frame_returns_latest_frame_not_after_control_time():
|
|
||||||
frames = (
|
|
||||||
CameraFrame(_image(1), 10, 100.0, 900_000_000),
|
|
||||||
CameraFrame(_image(2), 11, 133.3, 933_000_000),
|
|
||||||
CameraFrame(_image(3), 12, 166.6, 1_010_000_000),
|
|
||||||
)
|
|
||||||
|
|
||||||
selected, age_ms = select_frame(frames, 1_000_000_000, 100.0)
|
|
||||||
|
|
||||||
assert selected.frame_number == 11
|
|
||||||
assert age_ms == pytest.approx(67.0, abs=0.1)
|
|
||||||
|
|
||||||
|
|
||||||
def test_select_frame_rejects_missing_old_and_invalid_images():
|
|
||||||
with pytest.raises(QualityError, match="camera_frame_missing"):
|
|
||||||
select_frame((), 1_000_000_000, 50.0)
|
|
||||||
with pytest.raises(QualityError, match="camera_frame_too_old"):
|
|
||||||
select_frame(
|
|
||||||
(CameraFrame(_image(1), 10, 100.0, 900_000_000),),
|
|
||||||
1_000_000_000,
|
|
||||||
50.0,
|
|
||||||
)
|
|
||||||
with pytest.raises(QualityError, match="camera_frame_format"):
|
|
||||||
select_frame(
|
|
||||||
(
|
|
||||||
CameraFrame(
|
|
||||||
_image(1, shape=(10, 10, 3)),
|
|
||||||
10,
|
|
||||||
100.0,
|
|
||||||
990_000_000,
|
|
||||||
),
|
|
||||||
),
|
|
||||||
1_000_000_000,
|
|
||||||
50.0,
|
|
||||||
)
|
|
||||||
|
|
||||||
|
|
||||||
def test_select_camera_pair_rejects_inter_camera_skew():
|
|
||||||
high = (CameraFrame(_image(1), 10, 100.0, 990_000_000),)
|
|
||||||
wrist = (CameraFrame(_image(2), 20, 100.0, 930_000_000),)
|
|
||||||
|
|
||||||
with pytest.raises(QualityError, match="camera_skew"):
|
|
||||||
select_camera_pair(
|
|
||||||
high,
|
|
||||||
wrist,
|
|
||||||
1_000_000_000,
|
|
||||||
max_age_ms=100.0,
|
|
||||||
max_skew_ms=50.0,
|
|
||||||
)
|
|
||||||
|
|
||||||
|
|
||||||
def test_camera_buffer_is_bounded_and_counts_dropped_frames():
|
|
||||||
buffer = CameraBuffer(maxlen=4)
|
|
||||||
for frame_number in (10, 11, 13, 14, 15):
|
|
||||||
buffer.push(
|
|
||||||
CameraFrame(
|
|
||||||
_image(frame_number),
|
|
||||||
frame_number,
|
|
||||||
float(frame_number),
|
|
||||||
frame_number * 1_000_000,
|
|
||||||
)
|
|
||||||
)
|
|
||||||
|
|
||||||
stats = buffer.stats()
|
|
||||||
|
|
||||||
assert [frame.frame_number for frame in buffer.snapshot()] == [
|
|
||||||
11,
|
|
||||||
13,
|
|
||||||
14,
|
|
||||||
15,
|
|
||||||
]
|
|
||||||
assert stats.frame_count == 5
|
|
||||||
assert stats.dropped_frames == 1
|
|
||||||
assert stats.drop_ratio == pytest.approx(1.0 / 6.0)
|
|
||||||
assert stats.fps == pytest.approx(800.0)
|
|
||||||
|
|
||||||
|
|
||||||
requires_h5py = pytest.mark.skipif(
|
|
||||||
h5py is None,
|
|
||||||
reason="h5py is not installed",
|
|
||||||
)
|
|
||||||
|
|
||||||
|
|
||||||
def _metadata():
|
|
||||||
return EpisodeMetadata(
|
|
||||||
joint_names=tuple(f"joint_{index}" for index in range(1, 8))
|
|
||||||
+ ("gripper",),
|
|
||||||
joint_lower_limits=np.full(7, -3.0, dtype=np.float64),
|
|
||||||
joint_upper_limits=np.full(7, 3.0, dtype=np.float64),
|
|
||||||
)
|
|
||||||
|
|
||||||
|
|
||||||
def _episode_sample(seq):
|
|
||||||
control_ns = seq * 11_111_111
|
|
||||||
qpos = np.zeros(8, dtype=np.float32)
|
|
||||||
qpos[-1] = 1.0
|
|
||||||
action = qpos.copy()
|
|
||||||
return {
|
|
||||||
"observations/qpos": qpos,
|
|
||||||
"action": action,
|
|
||||||
"observations/images/cam_high": _image(seq % 255),
|
|
||||||
"observations/images/cam_right_wrist": _image((seq + 1) % 255),
|
|
||||||
"debug/timestamps/control_monotonic_ns": control_ns,
|
|
||||||
"debug/timestamps/feedback_monotonic_ns": control_ns - 1_000_000,
|
|
||||||
"debug/timestamps/action_monotonic_ns": control_ns,
|
|
||||||
"debug/timestamps/cam_high_host_monotonic_ns": control_ns - 2_000_000,
|
|
||||||
"debug/timestamps/cam_wrist_host_monotonic_ns": control_ns - 3_000_000,
|
|
||||||
"debug/timestamps/cam_high_hardware_ms": float(seq),
|
|
||||||
"debug/timestamps/cam_wrist_hardware_ms": float(seq),
|
|
||||||
"debug/timestamps/cam_high_age_ms": 2.0,
|
|
||||||
"debug/timestamps/cam_wrist_age_ms": 3.0,
|
|
||||||
"debug/timestamps/inter_camera_skew_ms": 1.0,
|
|
||||||
"debug/cameras/cam_high_frame_number": seq,
|
|
||||||
"debug/cameras/cam_wrist_frame_number": seq,
|
|
||||||
"debug/control/control_seq": seq,
|
|
||||||
"debug/control/teleop_active": 1,
|
|
||||||
"debug/control/action_valid": 1,
|
|
||||||
"debug/control/command_sent": 1,
|
|
||||||
"debug/control/target_clamped": 0,
|
|
||||||
"debug/control/control_fault": 0,
|
|
||||||
"debug/qp/raw_target": np.zeros(7, dtype=np.float32),
|
|
||||||
"debug/qp/attempted": 1,
|
|
||||||
"debug/qp/success": 1,
|
|
||||||
"debug/qp/duration_ms": 1.0,
|
|
||||||
"debug/tcp/current_pose": np.zeros(7, dtype=np.float32),
|
|
||||||
"debug/tcp/raw_target_pose": np.zeros(7, dtype=np.float32),
|
|
||||||
"debug/tcp/final_target_pose": np.zeros(7, dtype=np.float32),
|
|
||||||
"debug/tcp/command_velocity": np.zeros(6, dtype=np.float32),
|
|
||||||
"debug/pico/right_pose": np.zeros(7, dtype=np.float32),
|
|
||||||
"debug/pico/right_inputs": np.zeros(6, dtype=np.float32),
|
|
||||||
"debug/pico/left_secondary": 0,
|
|
||||||
"debug/gripper/target_open": 1,
|
|
||||||
"debug/gripper/state_open": 1,
|
|
||||||
"debug/gripper/command_pending": 0,
|
|
||||||
"debug/gripper/command_failed": 0,
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
@requires_h5py
|
|
||||||
def test_episode_store_writes_act_core_schema(tmp_path):
|
|
||||||
store = EpisodeStore.create(
|
|
||||||
tmp_path / "episode_0.partial.hdf5",
|
|
||||||
_metadata(),
|
|
||||||
)
|
|
||||||
for seq in (100, 103, 106):
|
|
||||||
store.append(_episode_sample(seq))
|
|
||||||
store.close()
|
|
||||||
|
|
||||||
with h5py.File(store.path, "r") as root:
|
|
||||||
assert root.attrs["sim"] == np.bool_(False)
|
|
||||||
assert root.attrs["action_alignment"] == "same_step_causal"
|
|
||||||
assert root["observations/qpos"].shape == (3, 8)
|
|
||||||
assert root["observations/qpos"].dtype == np.float32
|
|
||||||
assert root["action"].shape == (3, 8)
|
|
||||||
assert root["action"].dtype == np.float32
|
|
||||||
assert root["observations/images/cam_high"].shape == (
|
|
||||||
3,
|
|
||||||
480,
|
|
||||||
640,
|
|
||||||
3,
|
|
||||||
)
|
|
||||||
assert root["observations/images/cam_high"].dtype == np.uint8
|
|
||||||
assert root["observations/images/cam_right_wrist"].shape == (
|
|
||||||
3,
|
|
||||||
480,
|
|
||||||
640,
|
|
||||||
3,
|
|
||||||
)
|
|
||||||
assert "observations/qvel" not in root
|
|
||||||
assert "observations/effort" not in root
|
|
||||||
assert "compress_len" not in root
|
|
||||||
|
|
||||||
|
|
||||||
@requires_h5py
|
|
||||||
def test_episode_store_truncates_every_time_axis_dataset(tmp_path):
|
|
||||||
store = EpisodeStore.create(
|
|
||||||
tmp_path / "episode_0.partial.hdf5",
|
|
||||||
_metadata(),
|
|
||||||
)
|
|
||||||
for seq in (100, 103, 106):
|
|
||||||
store.append(_episode_sample(seq))
|
|
||||||
|
|
||||||
store.truncate(2)
|
|
||||||
store.close()
|
|
||||||
|
|
||||||
lengths = []
|
|
||||||
with h5py.File(store.path, "r") as root:
|
|
||||||
root.visititems(
|
|
||||||
lambda _name, item: lengths.append(item.shape[0])
|
|
||||||
if isinstance(item, h5py.Dataset)
|
|
||||||
else None
|
|
||||||
)
|
|
||||||
assert lengths
|
|
||||||
assert set(lengths) == {2}
|
|
||||||
|
|
||||||
|
|
||||||
def test_next_index_uses_max_saved_episode_and_ignores_rejected(tmp_path):
|
|
||||||
(tmp_path / "episode_2.hdf5").touch()
|
|
||||||
(tmp_path / "episode_9.hdf5").touch()
|
|
||||||
rejected = tmp_path / "rejected"
|
|
||||||
rejected.mkdir()
|
|
||||||
(rejected / "episode_20_bad_20260810.hdf5").touch()
|
|
||||||
|
|
||||||
assert next_episode_index(tmp_path) == 10
|
|
||||||
|
|
||||||
|
|
||||||
def test_publish_never_overwrites_existing_episode(tmp_path):
|
|
||||||
partial = tmp_path / "episode_1.partial.hdf5"
|
|
||||||
partial.write_bytes(b"new")
|
|
||||||
final = tmp_path / "episode_1.hdf5"
|
|
||||||
final.write_bytes(b"old")
|
|
||||||
|
|
||||||
with pytest.raises(FileExistsError):
|
|
||||||
publish_without_overwrite(partial, final)
|
|
||||||
|
|
||||||
assert final.read_bytes() == b"old"
|
|
||||||
assert partial.read_bytes() == b"new"
|
|
||||||
|
|
||||||
|
|
||||||
@requires_h5py
|
|
||||||
def test_recover_marks_readable_and_preserves_unreadable_partial(tmp_path):
|
|
||||||
readable = tmp_path / "episode_1.partial.hdf5"
|
|
||||||
store = EpisodeStore.create(readable, _metadata())
|
|
||||||
store.append(_episode_sample(100))
|
|
||||||
store.close()
|
|
||||||
unreadable = tmp_path / "episode_2.partial.hdf5"
|
|
||||||
unreadable.write_bytes(b"not hdf5")
|
|
||||||
|
|
||||||
recovered = recover_partial_files(tmp_path, timestamp="20260810T120000")
|
|
||||||
|
|
||||||
assert len(recovered) == 2
|
|
||||||
rejected = tmp_path / "rejected" / (
|
|
||||||
"episode_1_crash_recovered_20260810T120000.hdf5"
|
|
||||||
)
|
|
||||||
assert rejected in recovered
|
|
||||||
with h5py.File(rejected, "r") as root:
|
|
||||||
assert root.attrs["episode_status"] == "rejected"
|
|
||||||
assert root.attrs["reject_reason"] == "crash_recovered"
|
|
||||||
assert root.attrs["interrupted"] == np.bool_(True)
|
|
||||||
assert not readable.exists()
|
|
||||||
assert any(path.name.endswith(".partial.hdf5") for path in recovered)
|
|
||||||
assert unreadable not in recovered
|
|
||||||
assert not unreadable.exists()
|
|
||||||
|
|
||||||
|
|
||||||
def test_discard_partial_removes_only_current_file(tmp_path):
|
|
||||||
current = tmp_path / "episode_1.partial.hdf5"
|
|
||||||
current.write_bytes(b"current")
|
|
||||||
saved = tmp_path / "episode_0.hdf5"
|
|
||||||
saved.write_bytes(b"saved")
|
|
||||||
|
|
||||||
discard_partial(current)
|
|
||||||
|
|
||||||
assert not current.exists()
|
|
||||||
assert saved.read_bytes() == b"saved"
|
|
||||||
assert next_episode_index(tmp_path) == 1
|
|
||||||
|
|
||||||
|
|
||||||
def test_task_directory_lock_rejects_second_recorder(tmp_path):
|
|
||||||
first = TaskDirectoryLock(tmp_path)
|
|
||||||
second = TaskDirectoryLock(tmp_path)
|
|
||||||
first.acquire()
|
|
||||||
try:
|
|
||||||
with pytest.raises(BlockingIOError):
|
|
||||||
second.acquire()
|
|
||||||
finally:
|
|
||||||
first.release()
|
|
||||||
|
|
||||||
|
|
||||||
def _quality_limits():
|
|
||||||
return QualityLimits(min_samples=3, max_samples=100)
|
|
||||||
|
|
||||||
|
|
||||||
def _valid_episode(tmp_path):
|
|
||||||
path = tmp_path / "episode_0.partial.hdf5"
|
|
||||||
store = EpisodeStore.create(path, _metadata())
|
|
||||||
for index, seq in enumerate((100, 103, 106)):
|
|
||||||
sample = _episode_sample(seq)
|
|
||||||
sample["debug/cameras/cam_high_frame_number"] = 200 + index
|
|
||||||
sample["debug/cameras/cam_wrist_frame_number"] = 300 + index
|
|
||||||
store.append(sample)
|
|
||||||
store.close()
|
|
||||||
with h5py.File(path, "r+") as root:
|
|
||||||
root.attrs["camera_high_fps"] = 30.0
|
|
||||||
root.attrs["camera_right_wrist_fps"] = 30.0
|
|
||||||
root.attrs["camera_high_drop_ratio"] = 0.0
|
|
||||||
root.attrs["camera_right_wrist_drop_ratio"] = 0.0
|
|
||||||
return path
|
|
||||||
|
|
||||||
|
|
||||||
@requires_h5py
|
|
||||||
def test_validate_episode_accepts_valid_file(tmp_path):
|
|
||||||
report = validate_episode(_valid_episode(tmp_path), _quality_limits())
|
|
||||||
|
|
||||||
assert report.accepted
|
|
||||||
assert report.reason is None
|
|
||||||
assert report.metrics["control_hz"] == pytest.approx(30.0, rel=1e-5)
|
|
||||||
|
|
||||||
|
|
||||||
def _mutate_episode(path, mutation):
|
|
||||||
with h5py.File(path, "r+") as root:
|
|
||||||
if mutation == "short_episode":
|
|
||||||
root.visititems(
|
|
||||||
lambda _name, item: item.resize(2, axis=0)
|
|
||||||
if isinstance(item, h5py.Dataset)
|
|
||||||
else None
|
|
||||||
)
|
|
||||||
elif mutation == "control_seq_gap":
|
|
||||||
root["debug/control/control_seq"][1] = 104
|
|
||||||
elif mutation == "nonfinite_qpos":
|
|
||||||
root["observations/qpos"][1, 0] = np.nan
|
|
||||||
elif mutation == "joint_limit":
|
|
||||||
root["action"][1, 0] = 4.0
|
|
||||||
elif mutation == "invalid_gripper":
|
|
||||||
root["action"][1, 7] = 0.5
|
|
||||||
elif mutation == "feedback_age":
|
|
||||||
control_ns = root["debug/timestamps/control_monotonic_ns"][1]
|
|
||||||
root["debug/timestamps/feedback_monotonic_ns"][1] = (
|
|
||||||
control_ns - 60_000_000
|
|
||||||
)
|
|
||||||
elif mutation == "action_invalid":
|
|
||||||
root["debug/control/action_valid"][1] = 0
|
|
||||||
elif mutation == "control_fault":
|
|
||||||
root["debug/control/control_fault"][1] = 1
|
|
||||||
elif mutation == "camera_fps":
|
|
||||||
root.attrs["camera_high_fps"] = 20.0
|
|
||||||
elif mutation == "camera_drop":
|
|
||||||
root.attrs["camera_right_wrist_drop_ratio"] = 0.02
|
|
||||||
elif mutation == "camera_age":
|
|
||||||
root["debug/timestamps/cam_high_age_ms"][1] = 60.0
|
|
||||||
elif mutation == "camera_skew":
|
|
||||||
root["debug/timestamps/inter_camera_skew_ms"][1] = 60.0
|
|
||||||
elif mutation == "final_gripper_closed":
|
|
||||||
root["observations/qpos"][-1, 7] = 0.0
|
|
||||||
else:
|
|
||||||
raise AssertionError(f"unknown mutation: {mutation}")
|
|
||||||
|
|
||||||
|
|
||||||
@requires_h5py
|
|
||||||
@pytest.mark.parametrize(
|
|
||||||
("mutation", "reason"),
|
|
||||||
[
|
|
||||||
("short_episode", "too_few_samples"),
|
|
||||||
("control_seq_gap", "control_sequence_gap"),
|
|
||||||
("nonfinite_qpos", "nonfinite_qpos"),
|
|
||||||
("joint_limit", "joint_limit_violation"),
|
|
||||||
("invalid_gripper", "invalid_gripper_state"),
|
|
||||||
("feedback_age", "feedback_too_old"),
|
|
||||||
("action_invalid", "invalid_action"),
|
|
||||||
("control_fault", "control_fault"),
|
|
||||||
("camera_fps", "camera_fps"),
|
|
||||||
("camera_drop", "camera_drop_ratio"),
|
|
||||||
("camera_age", "camera_frame_too_old"),
|
|
||||||
("camera_skew", "camera_skew"),
|
|
||||||
("final_gripper_closed", "final_gripper_not_open"),
|
|
||||||
],
|
|
||||||
)
|
|
||||||
def test_validate_episode_reports_stable_reason(
|
|
||||||
tmp_path,
|
|
||||||
mutation,
|
|
||||||
reason,
|
|
||||||
):
|
|
||||||
path = _valid_episode(tmp_path)
|
|
||||||
_mutate_episode(path, mutation)
|
|
||||||
|
|
||||||
report = validate_episode(path, _quality_limits())
|
|
||||||
|
|
||||||
assert not report.accepted
|
|
||||||
assert report.reason == reason
|
|
||||||
|
|
||||||
|
|
||||||
@requires_h5py
|
|
||||||
def test_validate_episode_reports_qp_failures_without_rejecting(tmp_path):
|
|
||||||
path = _valid_episode(tmp_path)
|
|
||||||
with h5py.File(path, "r+") as root:
|
|
||||||
root["debug/qp/attempted"][:] = (1, 1, 1)
|
|
||||||
root["debug/qp/success"][:] = (0, 0, 1)
|
|
||||||
root["debug/control/target_clamped"][:] = (1, 0, 1)
|
|
||||||
|
|
||||||
report = validate_episode(path, _quality_limits())
|
|
||||||
|
|
||||||
assert report.accepted
|
|
||||||
assert report.metrics["qp_failure_count"] == 2
|
|
||||||
assert report.metrics["qp_failure_ratio"] == pytest.approx(2.0 / 3.0)
|
|
||||||
assert report.metrics["qp_longest_failure_streak"] == 2
|
|
||||||
assert report.metrics["target_clamped_count"] == 2
|
|
||||||
|
|
||||||
|
|
||||||
class _StatusPublisher:
|
|
||||||
def __init__(self):
|
|
||||||
self.messages = []
|
|
||||||
|
|
||||||
def publish(self, message):
|
|
||||||
self.messages.append(message.data)
|
|
||||||
|
|
||||||
|
|
||||||
class _Logger:
|
|
||||||
def info(self, *_args, **_kwargs):
|
|
||||||
pass
|
|
||||||
|
|
||||||
def warn(self, *_args, **_kwargs):
|
|
||||||
pass
|
|
||||||
|
|
||||||
def error(self, *_args, **_kwargs):
|
|
||||||
pass
|
|
||||||
|
|
||||||
|
|
||||||
def _control_message(seq, control_ns, *, grip=True):
|
|
||||||
message = ActControlSample()
|
|
||||||
message.control_seq = seq
|
|
||||||
message.control_monotonic_ns = control_ns
|
|
||||||
message.feedback_monotonic_ns = control_ns - 1_000_000
|
|
||||||
message.action_monotonic_ns = control_ns + 1_000_000 if grip else -1
|
|
||||||
message.q_actual = [0.0] * 7
|
|
||||||
message.q_qp_raw = [0.0] * 7
|
|
||||||
message.q_target = [0.0] * 7
|
|
||||||
message.joint_lower_limits = [-3.0] * 7
|
|
||||||
message.joint_upper_limits = [3.0] * 7
|
|
||||||
message.tcp_current.orientation.w = 1.0
|
|
||||||
message.tcp_raw_target.orientation.w = 1.0
|
|
||||||
message.tcp_target.orientation.w = 1.0
|
|
||||||
message.pico_pose.orientation.w = 1.0
|
|
||||||
message.pico_grip = grip
|
|
||||||
message.gripper_target_open = True
|
|
||||||
message.gripper_state_open = True
|
|
||||||
message.gripper_state_known = True
|
|
||||||
message.teleop_active = grip
|
|
||||||
message.feedback_valid = True
|
|
||||||
message.action_valid = True
|
|
||||||
message.command_sent = grip
|
|
||||||
message.qp_attempted = grip
|
|
||||||
message.qp_success = grip
|
|
||||||
return message
|
|
||||||
|
|
||||||
|
|
||||||
def _seed_camera(start_ns, first_number):
|
|
||||||
camera = SimpleNamespace(
|
|
||||||
buffer=CameraBuffer(maxlen=4),
|
|
||||||
last_error=None,
|
|
||||||
)
|
|
||||||
image = _image(1)
|
|
||||||
for index in range(151):
|
|
||||||
camera.buffer.push(
|
|
||||||
CameraFrame(
|
|
||||||
image,
|
|
||||||
first_number + index,
|
|
||||||
index * (1000.0 / 30.0),
|
|
||||||
start_ns
|
|
||||||
- 5_020_000_000
|
|
||||||
+ round(index * 5_000_000_000 / 150),
|
|
||||||
)
|
|
||||||
)
|
|
||||||
return camera
|
|
||||||
|
|
||||||
|
|
||||||
def _recorder_for_test(tmp_path):
|
|
||||||
now_ns = 10_000_000_000
|
|
||||||
recorder = object.__new__(ActEpisodeRecorder)
|
|
||||||
recorder._task_dir = tmp_path / "tomato_pick"
|
|
||||||
recorder._task_dir.mkdir(parents=True)
|
|
||||||
recorder._quality_limits = _quality_limits()
|
|
||||||
recorder._min_free_space_bytes = 4 * 1024**3
|
|
||||||
recorder._controller_timeout_ns = 500_000_000
|
|
||||||
recorder._camera_warmup_ns = 5_000_000_000
|
|
||||||
recorder._gripper_completion_timeout_ns = 3_000_000_000
|
|
||||||
recorder._writer_queue_size = 8
|
|
||||||
recorder._max_camera_age_ms = 50.0
|
|
||||||
recorder._max_camera_skew_ms = 50.0
|
|
||||||
recorder._session = RecordingSession(max_samples=100)
|
|
||||||
recorder._button_tracker = ButtonTracker(hold_ns=1_000_000_000)
|
|
||||||
recorder._latest_control = _control_message(99, now_ns - 1_000_000)
|
|
||||||
recorder._latest_control_received_ns = now_ns - 1_000_000
|
|
||||||
recorder._right_controller_received_ns = now_ns - 1_000_000
|
|
||||||
recorder._left_controller_received_ns = now_ns - 1_000_000
|
|
||||||
recorder._left_secondary = False
|
|
||||||
recorder._high_camera = _seed_camera(now_ns, 850)
|
|
||||||
recorder._wrist_camera = _seed_camera(now_ns, 1850)
|
|
||||||
recorder._camera_start_error = None
|
|
||||||
recorder._writer = None
|
|
||||||
recorder._store = None
|
|
||||||
recorder._partial_path = None
|
|
||||||
recorder._camera_baselines = None
|
|
||||||
recorder._saving_deadline_ns = None
|
|
||||||
recorder._status_pub = _StatusPublisher()
|
|
||||||
recorder._now_ns = lambda: now_ns
|
|
||||||
recorder._disk_usage = lambda _path: SimpleNamespace(free=5 * 1024**3)
|
|
||||||
recorder.get_logger = lambda: _Logger()
|
|
||||||
return recorder
|
|
||||||
|
|
||||||
|
|
||||||
@requires_h5py
|
|
||||||
def test_preflight_requires_open_gripper_fresh_inputs_and_disk_space(tmp_path):
|
|
||||||
recorder = _recorder_for_test(tmp_path)
|
|
||||||
|
|
||||||
assert recorder._run_preflight() is None
|
|
||||||
|
|
||||||
recorder._latest_control.gripper_state_open = False
|
|
||||||
assert recorder._run_preflight() == "gripper_not_open"
|
|
||||||
recorder._latest_control.gripper_state_open = True
|
|
||||||
recorder._right_controller_received_ns = 0
|
|
||||||
assert recorder._run_preflight() == "right_controller_stale"
|
|
||||||
recorder._right_controller_received_ns = recorder._now_ns()
|
|
||||||
recorder._disk_usage = lambda _path: SimpleNamespace(free=1024)
|
|
||||||
assert recorder._run_preflight() == "insufficient_disk_space"
|
|
||||||
|
|
||||||
|
|
||||||
def _push_recording_frames(recorder, control_ns, frame_number):
|
|
||||||
recorder._high_camera.buffer.push(
|
|
||||||
CameraFrame(
|
|
||||||
_image(2),
|
|
||||||
frame_number,
|
|
||||||
float(frame_number),
|
|
||||||
control_ns - 2_000_000,
|
|
||||||
)
|
|
||||||
)
|
|
||||||
recorder._wrist_camera.buffer.push(
|
|
||||||
CameraFrame(
|
|
||||||
_image(3),
|
|
||||||
frame_number,
|
|
||||||
float(frame_number),
|
|
||||||
control_ns - 3_000_000,
|
|
||||||
)
|
|
||||||
)
|
|
||||||
|
|
||||||
|
|
||||||
def _finish_fake_episode(recorder):
|
|
||||||
start_ns = recorder._now_ns()
|
|
||||||
frame_number = 1001
|
|
||||||
for offset, seq in enumerate(range(100, 107)):
|
|
||||||
control_ns = start_ns + offset * 11_111_111
|
|
||||||
if (seq - 100) % 3 == 0:
|
|
||||||
_push_recording_frames(recorder, control_ns, frame_number)
|
|
||||||
frame_number += 1
|
|
||||||
recorder._on_control_sample(_control_message(seq, control_ns))
|
|
||||||
|
|
||||||
recorder._on_control_sample(
|
|
||||||
_control_message(107, start_ns + 7 * 11_111_111, grip=False)
|
|
||||||
)
|
|
||||||
recorder._handle_right_b(grip=False)
|
|
||||||
final_ns = start_ns + 8 * 11_111_111
|
|
||||||
_push_recording_frames(recorder, final_ns, frame_number)
|
|
||||||
recorder._on_control_sample(_control_message(108, final_ns, grip=False))
|
|
||||||
|
|
||||||
|
|
||||||
@requires_h5py
|
|
||||||
def test_end_to_end_fake_episode_saves_and_returns_idle(tmp_path):
|
|
||||||
recorder = _recorder_for_test(tmp_path)
|
|
||||||
recorder._handle_right_b(grip=False)
|
|
||||||
|
|
||||||
assert recorder.state is RecordingState.ARMED
|
|
||||||
|
|
||||||
_finish_fake_episode(recorder)
|
|
||||||
|
|
||||||
assert (tmp_path / "tomato_pick" / "episode_0.hdf5").is_file()
|
|
||||||
assert recorder.state is RecordingState.IDLE
|
|
||||||
assert "SAVING" in recorder._status_pub.messages
|
|
||||||
assert recorder._status_pub.messages[-2:] == ["SAVED", "IDLE"]
|
|
||||||
|
|
||||||
|
|
||||||
@requires_h5py
|
|
||||||
def test_final_publish_rejects_allocated_episode_number_conflict(tmp_path):
|
|
||||||
recorder = _recorder_for_test(tmp_path)
|
|
||||||
recorder._handle_right_b(grip=False)
|
|
||||||
existing = recorder._task_dir / "episode_0.hdf5"
|
|
||||||
existing.write_bytes(b"existing")
|
|
||||||
|
|
||||||
_finish_fake_episode(recorder)
|
|
||||||
|
|
||||||
assert existing.read_bytes() == b"existing"
|
|
||||||
assert not (recorder._task_dir / "episode_1.hdf5").exists()
|
|
||||||
rejected = list((recorder._task_dir / "rejected").glob("*.hdf5"))
|
|
||||||
assert len(rejected) == 1
|
|
||||||
with h5py.File(rejected[0], "r") as root:
|
|
||||||
assert root.attrs["reject_reason"] == "episode_number_conflict"
|
|
||||||
|
|
||||||
|
|
||||||
@requires_h5py
|
|
||||||
def test_discard_and_interrupt_only_process_current_partial(tmp_path):
|
|
||||||
recorder = _recorder_for_test(tmp_path)
|
|
||||||
recorder._handle_right_b(grip=False)
|
|
||||||
partial = recorder._partial_path
|
|
||||||
|
|
||||||
recorder._discard_current()
|
|
||||||
|
|
||||||
assert not partial.exists()
|
|
||||||
assert recorder.state is RecordingState.IDLE
|
|
||||||
|
|
||||||
recorder._handle_right_b(grip=False)
|
|
||||||
recorder.interrupt_recording("interrupted")
|
|
||||||
rejected = list((recorder._task_dir / "rejected").glob("*.hdf5"))
|
|
||||||
assert len(rejected) == 1
|
|
||||||
with h5py.File(rejected[0], "r") as root:
|
|
||||||
assert root.attrs["reject_reason"] == "interrupted"
|
|
||||||
assert root.attrs["interrupted"] == np.bool_(True)
|
|
||||||
|
|
||||||
|
|
||||||
@requires_h5py
|
|
||||||
def test_a_button_and_camera_error_reject_without_robot_commands(tmp_path):
|
|
||||||
recorder = _recorder_for_test(tmp_path)
|
|
||||||
recorder._handle_right_b(grip=False)
|
|
||||||
recorder._button_tracker.on_right(
|
|
||||||
False,
|
|
||||||
False,
|
|
||||||
False,
|
|
||||||
recorder._now_ns(),
|
|
||||||
RecordingState.RECORDING,
|
|
||||||
)
|
|
||||||
recorder._session.state = RecordingState.RECORDING
|
|
||||||
controller = XrController()
|
|
||||||
controller.primary = True
|
|
||||||
|
|
||||||
recorder._on_right_controller(controller)
|
|
||||||
|
|
||||||
rejected = list((recorder._task_dir / "rejected").glob("*.hdf5"))
|
|
||||||
assert len(rejected) == 1
|
|
||||||
with h5py.File(rejected[0], "r") as root:
|
|
||||||
assert root.attrs["reject_reason"] == (
|
|
||||||
"initial_pose_command_during_episode"
|
|
||||||
)
|
|
||||||
|
|
||||||
recorder._handle_right_b(grip=False)
|
|
||||||
recorder._high_camera.last_error = RuntimeError("usb")
|
|
||||||
recorder._on_control_sample(
|
|
||||||
_control_message(100, recorder._now_ns())
|
|
||||||
)
|
|
||||||
rejected = list((recorder._task_dir / "rejected").glob("*.hdf5"))
|
|
||||||
assert len(rejected) == 2
|
|
||||||
camera_rejected = next(
|
|
||||||
path for path in rejected if "camera_error" in path.name
|
|
||||||
)
|
|
||||||
with h5py.File(camera_rejected, "r") as root:
|
|
||||||
assert root.attrs["reject_reason"] == "camera_error"
|
|
||||||
|
|
||||||
|
|
||||||
def test_episode_writer_reports_queue_backlog_and_write_error():
|
|
||||||
started = threading.Event()
|
|
||||||
release = threading.Event()
|
|
||||||
|
|
||||||
class BlockingStore:
|
|
||||||
def append(self, _sample):
|
|
||||||
started.set()
|
|
||||||
assert release.wait(timeout=1.0)
|
|
||||||
|
|
||||||
writer = EpisodeWriter(BlockingStore(), queue_size=1)
|
|
||||||
writer.submit({})
|
|
||||||
assert started.wait(timeout=1.0)
|
|
||||||
writer.submit({})
|
|
||||||
with pytest.raises(queue.Full):
|
|
||||||
writer.submit({})
|
|
||||||
release.set()
|
|
||||||
writer.finish()
|
|
||||||
assert writer.error is None
|
|
||||||
|
|
||||||
class FailingStore:
|
|
||||||
def append(self, _sample):
|
|
||||||
raise OSError("disk full")
|
|
||||||
|
|
||||||
writer = EpisodeWriter(FailingStore(), queue_size=1)
|
|
||||||
writer.submit({})
|
|
||||||
writer.finish()
|
|
||||||
assert isinstance(writer.error, OSError)
|
|
||||||
@@ -6,14 +6,13 @@ from types import ModuleType, SimpleNamespace
|
|||||||
import pytest
|
import pytest
|
||||||
import yaml
|
import yaml
|
||||||
|
|
||||||
from xr_rm_teleop import fun_peripheral, realman_adapter
|
from xr_rm_teleop import realman_adapter
|
||||||
from xr_rm_teleop.realman_adapter import RealManAdapter
|
from xr_rm_teleop.realman_adapter import RealManAdapter
|
||||||
from xr_rm_teleop.realman_adapter import MockRealManAdapter
|
from xr_rm_teleop.realman_adapter import MockRealManAdapter
|
||||||
from xr_rm_teleop.fun_peripheral import (
|
from xr_rm_teleop.fun_peripheral import (
|
||||||
PeripheralConfig,
|
PeripheralConfig,
|
||||||
_configure_tool_frame,
|
_configure_tool_frame,
|
||||||
load_peripheral_config,
|
load_peripheral_config,
|
||||||
peripheral_cfg,
|
|
||||||
)
|
)
|
||||||
|
|
||||||
|
|
||||||
@@ -83,78 +82,6 @@ def test_deployed_peripheral_config_selects_left_and_right_tools() -> None:
|
|||||||
assert right.tool_pose == [0.0, 0.0, 0.14, 0.0, 0.0, 0.0, 1.0]
|
assert right.tool_pose == [0.0, 0.0, 0.14, 0.0, 0.0, 0.0, 1.0]
|
||||||
|
|
||||||
|
|
||||||
def test_right_tool_initializes_open_only_for_right_arm() -> None:
|
|
||||||
config_file = CONFIG_DIR / "peripherals_rm75.yaml"
|
|
||||||
left = load_peripheral_config(str(config_file), "left")
|
|
||||||
right = load_peripheral_config(str(config_file), "right")
|
|
||||||
|
|
||||||
assert not left.set_initial_tool_state
|
|
||||||
assert right.set_initial_tool_state
|
|
||||||
|
|
||||||
|
|
||||||
def test_omnipic_initial_state_opens_fully(monkeypatch) -> None:
|
|
||||||
calls = []
|
|
||||||
|
|
||||||
class FakeArm:
|
|
||||||
def rm_set_voltage(self, *args):
|
|
||||||
del args
|
|
||||||
|
|
||||||
def rm_set_io_mode(self, *args):
|
|
||||||
del args
|
|
||||||
|
|
||||||
def rm_algo_quaternion2euler(self, quaternion):
|
|
||||||
del quaternion
|
|
||||||
return [0.0, 0.0, 0.0]
|
|
||||||
|
|
||||||
def rm_get_total_tool_frame(self):
|
|
||||||
return {"return_code": 0, "tool_names": []}
|
|
||||||
|
|
||||||
def rm_set_manual_tool_frame(self, *, frame):
|
|
||||||
del frame
|
|
||||||
return 0
|
|
||||||
|
|
||||||
def rm_change_tool_frame(self, tool_name):
|
|
||||||
del tool_name
|
|
||||||
return 0
|
|
||||||
|
|
||||||
def rm_set_modbus_mode(self, **kwargs):
|
|
||||||
del kwargs
|
|
||||||
return 0
|
|
||||||
|
|
||||||
def rm_write_single_register(self, params, value):
|
|
||||||
del params, value
|
|
||||||
return 0
|
|
||||||
|
|
||||||
sdk = ModuleType("Robotic_Arm.rm_robot_interface")
|
|
||||||
sdk.rm_frame_t = lambda *args: object()
|
|
||||||
sdk.rm_peripheral_read_write_params_t = lambda *args: object()
|
|
||||||
package = ModuleType("Robotic_Arm")
|
|
||||||
package.rm_robot_interface = sdk
|
|
||||||
monkeypatch.setitem(sys.modules, "Robotic_Arm", package)
|
|
||||||
monkeypatch.setitem(sys.modules, "Robotic_Arm.rm_robot_interface", sdk)
|
|
||||||
monkeypatch.setattr(fun_peripheral.time, "sleep", lambda seconds: None)
|
|
||||||
monkeypatch.setattr(
|
|
||||||
fun_peripheral,
|
|
||||||
"set_tool_position",
|
|
||||||
lambda robot, percent, device, scissorgripper: calls.append(
|
|
||||||
(percent, device, scissorgripper)
|
|
||||||
),
|
|
||||||
)
|
|
||||||
tools = {
|
|
||||||
"scissor": [[0.0] * 7, [0.0] * 7],
|
|
||||||
"omnipic": [[0.0] * 7, [0.0] * 7],
|
|
||||||
}
|
|
||||||
|
|
||||||
peripheral_cfg(
|
|
||||||
FakeArm(),
|
|
||||||
1,
|
|
||||||
tools,
|
|
||||||
set_initial_tool_state=True,
|
|
||||||
)
|
|
||||||
|
|
||||||
assert calls == [(1.0, 1, 1)]
|
|
||||||
|
|
||||||
|
|
||||||
@pytest.mark.parametrize(
|
@pytest.mark.parametrize(
|
||||||
("config_name", "node_names"),
|
("config_name", "node_names"),
|
||||||
[
|
[
|
||||||
|
|||||||
@@ -1,5 +1,4 @@
|
|||||||
import math
|
import math
|
||||||
import threading
|
|
||||||
import time
|
import time
|
||||||
from types import SimpleNamespace
|
from types import SimpleNamespace
|
||||||
|
|
||||||
@@ -43,69 +42,6 @@ class FakePublisher:
|
|||||||
self.messages.append(message)
|
self.messages.append(message)
|
||||||
|
|
||||||
|
|
||||||
def _tool_state_teleop(*, command_error=None):
|
|
||||||
started = threading.Event()
|
|
||||||
release = threading.Event()
|
|
||||||
|
|
||||||
class Adapter:
|
|
||||||
def set_tool_enabled(self, open_tool):
|
|
||||||
del open_tool
|
|
||||||
started.set()
|
|
||||||
assert release.wait(timeout=1.0)
|
|
||||||
if command_error is not None:
|
|
||||||
raise command_error
|
|
||||||
|
|
||||||
teleop = object.__new__(SingleArmVelocityTeleop)
|
|
||||||
teleop._arm_name = "right_rm75"
|
|
||||||
teleop._adapter = Adapter()
|
|
||||||
teleop._tool_command_queue = None
|
|
||||||
teleop._tool_worker_stop = threading.Event()
|
|
||||||
teleop._tool_worker_thread = None
|
|
||||||
teleop._tool_state_lock = threading.Lock()
|
|
||||||
teleop._tool_target_open = True
|
|
||||||
teleop._tool_state_open = True
|
|
||||||
teleop._tool_command_pending = False
|
|
||||||
teleop._tool_command_failed = False
|
|
||||||
teleop.get_logger = lambda: FakeLogger()
|
|
||||||
teleop._start_tool_worker()
|
|
||||||
return teleop, started, release
|
|
||||||
|
|
||||||
|
|
||||||
def test_tool_state_changes_only_after_command_succeeds() -> None:
|
|
||||||
teleop, started, release = _tool_state_teleop()
|
|
||||||
try:
|
|
||||||
teleop._enqueue_tool_command(False, "test")
|
|
||||||
assert started.wait(timeout=1.0)
|
|
||||||
|
|
||||||
assert teleop._tool_state_snapshot() == (False, True, True, False)
|
|
||||||
|
|
||||||
release.set()
|
|
||||||
assert teleop._tool_command_queue is not None
|
|
||||||
teleop._tool_command_queue.join()
|
|
||||||
|
|
||||||
assert teleop._tool_state_snapshot() == (False, False, False, False)
|
|
||||||
finally:
|
|
||||||
release.set()
|
|
||||||
teleop._shutdown_tool_worker()
|
|
||||||
|
|
||||||
|
|
||||||
def test_tool_failure_keeps_previous_state_and_is_reported() -> None:
|
|
||||||
teleop, started, release = _tool_state_teleop(
|
|
||||||
command_error=RuntimeError("modbus failed")
|
|
||||||
)
|
|
||||||
try:
|
|
||||||
teleop._enqueue_tool_command(False, "test")
|
|
||||||
assert started.wait(timeout=1.0)
|
|
||||||
release.set()
|
|
||||||
assert teleop._tool_command_queue is not None
|
|
||||||
teleop._tool_command_queue.join()
|
|
||||||
|
|
||||||
assert teleop._tool_state_snapshot() == (False, True, False, True)
|
|
||||||
finally:
|
|
||||||
release.set()
|
|
||||||
teleop._shutdown_tool_worker()
|
|
||||||
|
|
||||||
|
|
||||||
def _joint_publishing_teleop() -> SingleArmVelocityTeleop:
|
def _joint_publishing_teleop() -> SingleArmVelocityTeleop:
|
||||||
names = [f"omnipic_joint_{index}" for index in range(1, 8)]
|
names = [f"omnipic_joint_{index}" for index in range(1, 8)]
|
||||||
teleop = object.__new__(SingleArmVelocityTeleop)
|
teleop = object.__new__(SingleArmVelocityTeleop)
|
||||||
@@ -686,10 +622,9 @@ def test_qp_failure_returns_last_known_good_target() -> None:
|
|||||||
teleop._arm_name = "right_rm75"
|
teleop._arm_name = "right_rm75"
|
||||||
teleop.get_logger = lambda: FakeLogger()
|
teleop.get_logger = lambda: FakeLogger()
|
||||||
|
|
||||||
target, qp_success = teleop._solve_joint_target(np.eye(4))
|
target = teleop._solve_joint_target(np.eye(4))
|
||||||
|
|
||||||
assert target == pytest.approx([0.1] * 7)
|
assert target == pytest.approx([0.1] * 7)
|
||||||
assert not qp_success
|
|
||||||
assert teleop._last_valid_joint_target == pytest.approx([0.1] * 7)
|
assert teleop._last_valid_joint_target == pytest.approx([0.1] * 7)
|
||||||
|
|
||||||
|
|
||||||
@@ -705,10 +640,9 @@ def test_qp_success_updates_last_known_good_target() -> None:
|
|||||||
teleop._arm_name = "left_rm75"
|
teleop._arm_name = "left_rm75"
|
||||||
teleop.get_logger = lambda: FakeLogger()
|
teleop.get_logger = lambda: FakeLogger()
|
||||||
|
|
||||||
target, qp_success = teleop._solve_joint_target(np.eye(4))
|
target = teleop._solve_joint_target(np.eye(4))
|
||||||
|
|
||||||
assert target == pytest.approx([0.2] * 7)
|
assert target == pytest.approx([0.2] * 7)
|
||||||
assert qp_success
|
|
||||||
assert teleop._last_valid_joint_target == pytest.approx([0.2] * 7)
|
assert teleop._last_valid_joint_target == pytest.approx([0.2] * 7)
|
||||||
|
|
||||||
|
|
||||||
|
|||||||
@@ -272,20 +272,6 @@ def test_validated_transform_rejects_invalid_se3(transform: np.ndarray) -> None:
|
|||||||
_validated_transform(transform)
|
_validated_transform(transform)
|
||||||
|
|
||||||
|
|
||||||
def test_joint_position_limits_returns_a_copy() -> None:
|
|
||||||
solver = object.__new__(PlacoIkSolver)
|
|
||||||
solver._joint_limits = np.asarray([[-1.0, 1.0]] * 7)
|
|
||||||
|
|
||||||
first = solver.joint_position_limits
|
|
||||||
second = solver.joint_position_limits
|
|
||||||
|
|
||||||
assert first.shape == (7, 2)
|
|
||||||
assert np.isfinite(first).all()
|
|
||||||
assert np.all(first[:, 0] < first[:, 1])
|
|
||||||
first[0, 0] = 999.0
|
|
||||||
assert second[0, 0] != 999.0
|
|
||||||
|
|
||||||
|
|
||||||
def test_qp_result_rejects_nan_position_and_velocity_violations() -> None:
|
def test_qp_result_rejects_nan_position_and_velocity_violations() -> None:
|
||||||
solver = object.__new__(PlacoIkSolver)
|
solver = object.__new__(PlacoIkSolver)
|
||||||
solver._joint_limits = np.asarray([[-1.0, 1.0]] * 7)
|
solver._joint_limits = np.asarray([[-1.0, 1.0]] * 7)
|
||||||
|
|||||||
File diff suppressed because it is too large
Load Diff
@@ -225,12 +225,9 @@ def peripheral_cfg(
|
|||||||
time.sleep(0.5)
|
time.sleep(0.5)
|
||||||
|
|
||||||
if set_initial_tool_state:
|
if set_initial_tool_state:
|
||||||
set_tool_position(
|
set_tool_position(robot, percent=0.75, device=1, scissorgripper=scissorgripper)
|
||||||
robot,
|
time.sleep(1.5)
|
||||||
percent=1.0,
|
set_tool_position(robot, percent=0.15, device=1, scissorgripper=scissorgripper)
|
||||||
device=1,
|
|
||||||
scissorgripper=scissorgripper,
|
|
||||||
)
|
|
||||||
|
|
||||||
elif scissorgripper == 2:
|
elif scissorgripper == 2:
|
||||||
# 小型剪刀夹爪通过控制器 DO3/DO4 控制。
|
# 小型剪刀夹爪通过控制器 DO3/DO4 控制。
|
||||||
|
|||||||
@@ -157,10 +157,6 @@ class PlacoIkSolver:
|
|||||||
def base_configuration(self) -> list[float]:
|
def base_configuration(self) -> list[float]:
|
||||||
return self._robot.state.q[:7].tolist()
|
return self._robot.state.q[:7].tolist()
|
||||||
|
|
||||||
@property
|
|
||||||
def joint_position_limits(self) -> np.ndarray:
|
|
||||||
return self._joint_limits.copy()
|
|
||||||
|
|
||||||
def update_joint_state(self, joints: list[float]) -> np.ndarray:
|
def update_joint_state(self, joints: list[float]) -> np.ndarray:
|
||||||
values = np.asarray(joints, dtype=float)
|
values = np.asarray(joints, dtype=float)
|
||||||
if values.shape != (7,) or not np.isfinite(values).all():
|
if values.shape != (7,) or not np.isfinite(values).all():
|
||||||
|
|||||||
@@ -237,9 +237,9 @@ class RealManAdapter:
|
|||||||
)
|
)
|
||||||
|
|
||||||
def read_joint_state(self) -> JointStateSnapshot:
|
def read_joint_state(self) -> JointStateSnapshot:
|
||||||
arm = self._require_arm()
|
self._require_arm()
|
||||||
started_at = time.monotonic()
|
started_at = time.monotonic()
|
||||||
result = arm.rm_get_joint_degree()
|
result = self._arm.rm_get_joint_degree()
|
||||||
finished_at = time.monotonic()
|
finished_at = time.monotonic()
|
||||||
if not isinstance(result, tuple) or len(result) != 2:
|
if not isinstance(result, tuple) or len(result) != 2:
|
||||||
raise RuntimeError(
|
raise RuntimeError(
|
||||||
@@ -256,10 +256,10 @@ class RealManAdapter:
|
|||||||
)
|
)
|
||||||
|
|
||||||
def send_joint_target(self, joints: list[float], follow: bool) -> None:
|
def send_joint_target(self, joints: list[float], follow: bool) -> None:
|
||||||
arm = self._require_arm()
|
self._require_arm()
|
||||||
if len(joints) != 7 or not all(math.isfinite(value) for value in joints):
|
if len(joints) != 7 or not all(math.isfinite(value) for value in joints):
|
||||||
raise ValueError("joint target must contain 7 finite values")
|
raise ValueError("joint target must contain 7 finite values")
|
||||||
ret = arm.rm_movej_canfd(
|
ret = self._arm.rm_movej_canfd(
|
||||||
[math.degrees(value) for value in joints],
|
[math.degrees(value) for value in joints],
|
||||||
follow,
|
follow,
|
||||||
0,
|
0,
|
||||||
@@ -315,10 +315,9 @@ class RealManAdapter:
|
|||||||
self._arm = None
|
self._arm = None
|
||||||
self._realtime_callback = None
|
self._realtime_callback = None
|
||||||
|
|
||||||
def _require_arm(self) -> Any:
|
def _require_arm(self) -> None:
|
||||||
if self._arm is None:
|
if self._arm is None:
|
||||||
raise RuntimeError("睿尔曼机械臂尚未连接")
|
raise RuntimeError("睿尔曼机械臂尚未连接")
|
||||||
return self._arm
|
|
||||||
|
|
||||||
def _on_realtime_arm_state(self, data: Any) -> None:
|
def _on_realtime_arm_state(self, data: Any) -> None:
|
||||||
if not self._accept_realtime_feedback:
|
if not self._accept_realtime_feedback:
|
||||||
@@ -458,11 +457,11 @@ class RealManAdapter:
|
|||||||
self._try_call("rm_set_joint_max_acc", joint_index, self._joint_max_acc)
|
self._try_call("rm_set_joint_max_acc", joint_index, self._joint_max_acc)
|
||||||
|
|
||||||
def move_to_initial_pose(self) -> None:
|
def move_to_initial_pose(self) -> None:
|
||||||
arm = self._require_arm()
|
self._require_arm()
|
||||||
if self._initial_joint_pose is None:
|
if self._initial_joint_pose is None:
|
||||||
raise RuntimeError("启用初始位姿移动时必须配置 initial_joint_pose")
|
raise RuntimeError("启用初始位姿移动时必须配置 initial_joint_pose")
|
||||||
|
|
||||||
ret = arm.rm_movej(
|
ret = self._arm.rm_movej(
|
||||||
self._initial_joint_pose,
|
self._initial_joint_pose,
|
||||||
self._init_move_speed,
|
self._init_move_speed,
|
||||||
0,
|
0,
|
||||||
|
|||||||
@@ -10,19 +10,17 @@ import math
|
|||||||
import queue
|
import queue
|
||||||
import threading
|
import threading
|
||||||
import time
|
import time
|
||||||
from dataclasses import dataclass
|
|
||||||
from typing import Iterable
|
from typing import Iterable
|
||||||
|
|
||||||
import numpy as np
|
import numpy as np
|
||||||
import rclpy
|
import rclpy
|
||||||
from geometry_msgs.msg import PoseStamped, TwistStamped
|
from geometry_msgs.msg import PoseStamped, TwistStamped
|
||||||
from rclpy.node import Node
|
from rclpy.node import Node
|
||||||
from rclpy.qos import HistoryPolicy, QoSProfile, ReliabilityPolicy
|
|
||||||
from rclpy.time import Time
|
from rclpy.time import Time
|
||||||
from sensor_msgs.msg import JointState
|
from sensor_msgs.msg import JointState
|
||||||
from std_msgs.msg import Bool
|
from std_msgs.msg import Bool
|
||||||
|
|
||||||
from xr_rm_interfaces.msg import ActControlSample, XrController
|
from xr_rm_interfaces.msg import XrController
|
||||||
|
|
||||||
from .fun_peripheral import load_peripheral_config
|
from .fun_peripheral import load_peripheral_config
|
||||||
from .placo_ik_solver import PlacoIkSolver
|
from .placo_ik_solver import PlacoIkSolver
|
||||||
@@ -33,30 +31,6 @@ from .realman_adapter import (
|
|||||||
)
|
)
|
||||||
|
|
||||||
|
|
||||||
@dataclass
|
|
||||||
class _ActCycleContext:
|
|
||||||
control_seq: int
|
|
||||||
control_monotonic_ns: int
|
|
||||||
feedback_monotonic_ns: int = -1
|
|
||||||
action_monotonic_ns: int = -1
|
|
||||||
feedback_age_ms: float = math.inf
|
|
||||||
qp_duration_ms: float = 0.0
|
|
||||||
q_actual: list[float] | None = None
|
|
||||||
q_qp_raw: list[float] | None = None
|
|
||||||
q_target: list[float] | None = None
|
|
||||||
current_pose: np.ndarray | None = None
|
|
||||||
raw_target_pose: np.ndarray | None = None
|
|
||||||
target_pose: np.ndarray | None = None
|
|
||||||
command_velocity: list[float] | None = None
|
|
||||||
feedback_valid: bool = False
|
|
||||||
command_sent: bool = False
|
|
||||||
send_failed: bool = False
|
|
||||||
qp_attempted: bool = False
|
|
||||||
qp_success: bool = False
|
|
||||||
target_clamped: bool = False
|
|
||||||
control_fault: bool = False
|
|
||||||
|
|
||||||
|
|
||||||
def _norm(values: Iterable[float]) -> float:
|
def _norm(values: Iterable[float]) -> float:
|
||||||
return math.sqrt(sum(value * value for value in values))
|
return math.sqrt(sum(value * value for value in values))
|
||||||
|
|
||||||
@@ -317,19 +291,12 @@ class SingleArmVelocityTeleop(Node):
|
|||||||
self._latest_joint_positions: list[float] | None = None
|
self._latest_joint_positions: list[float] | None = None
|
||||||
self._last_joint_command_target: list[float] | None = None
|
self._last_joint_command_target: list[float] | None = None
|
||||||
self._last_joint_command_velocity: list[float] | None = None
|
self._last_joint_command_velocity: list[float] | None = None
|
||||||
self._last_successful_action_target: list[float] | None = None
|
|
||||||
self._act_control_seq = 0
|
|
||||||
self._joint_feedback_ready = False
|
self._joint_feedback_ready = False
|
||||||
self._grip_rearm_required = False
|
self._grip_rearm_required = False
|
||||||
self._feedback_resync_attempted = False
|
self._feedback_resync_attempted = False
|
||||||
self._control_fault_latched = False
|
self._control_fault_latched = False
|
||||||
self._stop_sent = True
|
self._stop_sent = True
|
||||||
self._trigger_tool_open = True
|
self._trigger_tool_open = True
|
||||||
self._tool_state_lock = threading.Lock()
|
|
||||||
self._tool_target_open = True
|
|
||||||
self._tool_state_open: bool | None = None
|
|
||||||
self._tool_command_pending = False
|
|
||||||
self._tool_command_failed = False
|
|
||||||
self._last_primary_pressed: bool | None = None
|
self._last_primary_pressed: bool | None = None
|
||||||
self._last_trigger_pressed: bool | None = None
|
self._last_trigger_pressed: bool | None = None
|
||||||
self._tool_command_queue: queue.Queue[tuple[bool, str] | None] | None = None
|
self._tool_command_queue: queue.Queue[tuple[bool, str] | None] | None = None
|
||||||
@@ -373,15 +340,6 @@ class SingleArmVelocityTeleop(Node):
|
|||||||
f"{debug_ns}/joint_target",
|
f"{debug_ns}/joint_target",
|
||||||
10,
|
10,
|
||||||
)
|
)
|
||||||
self._act_sample_pub = self.create_publisher(
|
|
||||||
ActControlSample,
|
|
||||||
f"{debug_ns}/act_control_sample",
|
|
||||||
QoSProfile(
|
|
||||||
history=HistoryPolicy.KEEP_LAST,
|
|
||||||
depth=10,
|
|
||||||
reliability=ReliabilityPolicy.BEST_EFFORT,
|
|
||||||
),
|
|
||||||
)
|
|
||||||
self._adapter = self._make_adapter()
|
self._adapter = self._make_adapter()
|
||||||
self._adapter.connect()
|
self._adapter.connect()
|
||||||
self._initialize_joint_state()
|
self._initialize_joint_state()
|
||||||
@@ -472,20 +430,11 @@ class SingleArmVelocityTeleop(Node):
|
|||||||
|
|
||||||
def _setup_tool_control(self) -> None:
|
def _setup_tool_control(self) -> None:
|
||||||
peripheral_arm = self._peripheral_arm_name()
|
peripheral_arm = self._peripheral_arm_name()
|
||||||
configure_on_connect = self._bool_parameter(
|
if self._bool_parameter("configure_peripheral_on_connect"):
|
||||||
"configure_peripheral_on_connect"
|
|
||||||
)
|
|
||||||
if configure_on_connect:
|
|
||||||
self._adapter.configure_peripheral(
|
self._adapter.configure_peripheral(
|
||||||
self._peripheral_config,
|
self._peripheral_config,
|
||||||
peripheral_arm,
|
peripheral_arm,
|
||||||
)
|
)
|
||||||
if self._peripheral_config.set_initial_tool_state:
|
|
||||||
with self._tool_state_lock:
|
|
||||||
self._tool_target_open = True
|
|
||||||
self._tool_state_open = True
|
|
||||||
self._tool_command_pending = False
|
|
||||||
self._tool_command_failed = False
|
|
||||||
|
|
||||||
if not self._enable_tool_control:
|
if not self._enable_tool_control:
|
||||||
if self._enable_trigger_gripper_control:
|
if self._enable_trigger_gripper_control:
|
||||||
@@ -535,10 +484,6 @@ class SingleArmVelocityTeleop(Node):
|
|||||||
)
|
)
|
||||||
return
|
return
|
||||||
|
|
||||||
with self._tool_state_lock:
|
|
||||||
self._tool_target_open = open_tool
|
|
||||||
self._tool_command_pending = True
|
|
||||||
|
|
||||||
item = (open_tool, source)
|
item = (open_tool, source)
|
||||||
while True:
|
while True:
|
||||||
try:
|
try:
|
||||||
@@ -567,34 +512,15 @@ class SingleArmVelocityTeleop(Node):
|
|||||||
try:
|
try:
|
||||||
self._adapter.set_tool_enabled(open_tool)
|
self._adapter.set_tool_enabled(open_tool)
|
||||||
except Exception as exc:
|
except Exception as exc:
|
||||||
with self._tool_state_lock:
|
|
||||||
self._tool_command_failed = True
|
|
||||||
self.get_logger().error(
|
self.get_logger().error(
|
||||||
f"{self._arm_name} tool {action} failed from {source}: {exc}"
|
f"{self._arm_name} tool {action} failed from {source}: {exc}"
|
||||||
)
|
)
|
||||||
continue
|
continue
|
||||||
with self._tool_state_lock:
|
|
||||||
self._tool_state_open = open_tool
|
|
||||||
self._tool_command_failed = False
|
|
||||||
self.get_logger().info(
|
self.get_logger().info(
|
||||||
f"{self._arm_name} tool {action} command sent from {source}"
|
f"{self._arm_name} tool {action} command sent from {source}"
|
||||||
)
|
)
|
||||||
finally:
|
finally:
|
||||||
self._tool_command_queue.task_done()
|
self._tool_command_queue.task_done()
|
||||||
if self._tool_command_queue.empty():
|
|
||||||
with self._tool_state_lock:
|
|
||||||
self._tool_command_pending = False
|
|
||||||
|
|
||||||
def _tool_state_snapshot(
|
|
||||||
self,
|
|
||||||
) -> tuple[bool, bool | None, bool, bool]:
|
|
||||||
with self._tool_state_lock:
|
|
||||||
return (
|
|
||||||
self._tool_target_open,
|
|
||||||
self._tool_state_open,
|
|
||||||
self._tool_command_pending,
|
|
||||||
self._tool_command_failed,
|
|
||||||
)
|
|
||||||
|
|
||||||
def _peripheral_arm_name(self) -> str:
|
def _peripheral_arm_name(self) -> str:
|
||||||
configured = str(self.get_parameter("peripheral_arm").value).strip().lower()
|
configured = str(self.get_parameter("peripheral_arm").value).strip().lower()
|
||||||
@@ -656,18 +582,6 @@ class SingleArmVelocityTeleop(Node):
|
|||||||
self._enqueue_tool_command(self._trigger_tool_open, "trigger")
|
self._enqueue_tool_command(self._trigger_tool_open, "trigger")
|
||||||
|
|
||||||
def _control_tick(self) -> None:
|
def _control_tick(self) -> None:
|
||||||
control_seq = getattr(self, "_act_control_seq", 0)
|
|
||||||
self._act_control_seq = control_seq + 1
|
|
||||||
cycle = _ActCycleContext(
|
|
||||||
control_seq=control_seq,
|
|
||||||
control_monotonic_ns=time.monotonic_ns(),
|
|
||||||
)
|
|
||||||
try:
|
|
||||||
self._control_tick_impl(cycle)
|
|
||||||
finally:
|
|
||||||
self._publish_act_control_sample(cycle)
|
|
||||||
|
|
||||||
def _control_tick_impl(self, cycle: _ActCycleContext) -> None:
|
|
||||||
tick_started_ns = time.perf_counter_ns()
|
tick_started_ns = time.perf_counter_ns()
|
||||||
last_tick_started_ns = getattr(
|
last_tick_started_ns = getattr(
|
||||||
self,
|
self,
|
||||||
@@ -682,12 +596,10 @@ class SingleArmVelocityTeleop(Node):
|
|||||||
)
|
)
|
||||||
now = self.get_clock().now()
|
now = self.get_clock().now()
|
||||||
if self._control_fault_latched:
|
if self._control_fault_latched:
|
||||||
cycle.control_fault = True
|
|
||||||
return
|
return
|
||||||
|
|
||||||
snapshot = self._adapter.get_latest_joint_state()
|
snapshot = self._adapter.get_latest_joint_state()
|
||||||
if not self._joint_snapshot_is_motion_ready(snapshot):
|
if not self._joint_snapshot_is_motion_ready(snapshot):
|
||||||
cycle.control_fault = True
|
|
||||||
self._grip_rearm_required = True
|
self._grip_rearm_required = True
|
||||||
if self._joint_feedback_ready:
|
if self._joint_feedback_ready:
|
||||||
self.get_logger().warn(
|
self.get_logger().warn(
|
||||||
@@ -698,18 +610,13 @@ class SingleArmVelocityTeleop(Node):
|
|||||||
self._safe_stop(reset_active=True)
|
self._safe_stop(reset_active=True)
|
||||||
return
|
return
|
||||||
assert snapshot is not None
|
assert snapshot is not None
|
||||||
cycle.q_actual = list(snapshot.positions)
|
|
||||||
cycle.feedback_monotonic_ns = int(snapshot.received_at * 1e9)
|
|
||||||
feedback_age = time.monotonic() - snapshot.received_at
|
feedback_age = time.monotonic() - snapshot.received_at
|
||||||
cycle.feedback_age_ms = feedback_age * 1000.0
|
|
||||||
if feedback_age < 0.0:
|
if feedback_age < 0.0:
|
||||||
cycle.control_fault = True
|
|
||||||
self._grip_rearm_required = True
|
self._grip_rearm_required = True
|
||||||
self._joint_feedback_ready = False
|
self._joint_feedback_ready = False
|
||||||
self._safe_stop(reset_active=True)
|
self._safe_stop(reset_active=True)
|
||||||
return
|
return
|
||||||
if feedback_age > self._command_timeout_sec:
|
if feedback_age > self._command_timeout_sec:
|
||||||
cycle.control_fault = True
|
|
||||||
self._handle_stale_joint_feedback(feedback_age)
|
self._handle_stale_joint_feedback(feedback_age)
|
||||||
return
|
return
|
||||||
|
|
||||||
@@ -717,7 +624,6 @@ class SingleArmVelocityTeleop(Node):
|
|||||||
try:
|
try:
|
||||||
current_pose = self._sync_joint_feedback(snapshot)
|
current_pose = self._sync_joint_feedback(snapshot)
|
||||||
except Exception as exc:
|
except Exception as exc:
|
||||||
cycle.control_fault = True
|
|
||||||
self.get_logger().error(
|
self.get_logger().error(
|
||||||
f"{self._arm_name} 关节反馈同步到 Placo 失败：{exc}",
|
f"{self._arm_name} 关节反馈同步到 Placo 失败：{exc}",
|
||||||
throttle_duration_sec=1.0,
|
throttle_duration_sec=1.0,
|
||||||
@@ -726,8 +632,6 @@ class SingleArmVelocityTeleop(Node):
|
|||||||
self._grip_rearm_required = True
|
self._grip_rearm_required = True
|
||||||
self._safe_stop(reset_active=True)
|
self._safe_stop(reset_active=True)
|
||||||
return
|
return
|
||||||
cycle.current_pose = current_pose
|
|
||||||
cycle.feedback_valid = True
|
|
||||||
if not self._joint_feedback_ready:
|
if not self._joint_feedback_ready:
|
||||||
if self._grip_rearm_required:
|
if self._grip_rearm_required:
|
||||||
message = (
|
message = (
|
||||||
@@ -776,7 +680,6 @@ class SingleArmVelocityTeleop(Node):
|
|||||||
try:
|
try:
|
||||||
controller_quat = self._controller_quaternion(self._last_msg)
|
controller_quat = self._controller_quaternion(self._last_msg)
|
||||||
except ValueError as exc:
|
except ValueError as exc:
|
||||||
cycle.control_fault = True
|
|
||||||
self.get_logger().warn(
|
self.get_logger().warn(
|
||||||
f"{self._arm_name} XR 手柄姿态无效，停止输出：{exc}",
|
f"{self._arm_name} XR 手柄姿态无效，停止输出：{exc}",
|
||||||
throttle_duration_sec=1.0,
|
throttle_duration_sec=1.0,
|
||||||
@@ -821,35 +724,19 @@ class SingleArmVelocityTeleop(Node):
|
|||||||
sent_target,
|
sent_target,
|
||||||
sent_orientation,
|
sent_orientation,
|
||||||
)
|
)
|
||||||
cycle.raw_target_pose = raw_target_pose
|
|
||||||
cycle.target_pose = target_pose
|
|
||||||
cycle.command_velocity = list(velocity)
|
|
||||||
cycle.target_clamped = target_clamped
|
|
||||||
|
|
||||||
self._publish_debug(raw_target_pose, target_pose, velocity, target_clamped)
|
self._publish_debug(raw_target_pose, target_pose, velocity, target_clamped)
|
||||||
cycle.qp_attempted = True
|
|
||||||
qp_started_ns = time.perf_counter_ns()
|
qp_started_ns = time.perf_counter_ns()
|
||||||
joint_target, qp_success = self._solve_joint_target(target_pose)
|
joint_target = self._solve_joint_target(target_pose)
|
||||||
qp_ms = (time.perf_counter_ns() - qp_started_ns) * 1e-6
|
qp_ms = (time.perf_counter_ns() - qp_started_ns) * 1e-6
|
||||||
cycle.qp_duration_ms = qp_ms
|
|
||||||
cycle.q_qp_raw = list(joint_target)
|
|
||||||
cycle.qp_success = qp_success
|
|
||||||
send_started_ns = time.perf_counter_ns()
|
send_started_ns = time.perf_counter_ns()
|
||||||
sent = self._send_joint_target(joint_target)
|
sent = self._send_joint_target(joint_target)
|
||||||
send_ms = (time.perf_counter_ns() - send_started_ns) * 1e-6
|
send_ms = (time.perf_counter_ns() - send_started_ns) * 1e-6
|
||||||
if sent:
|
if sent:
|
||||||
assert self._last_joint_command_target is not None
|
|
||||||
final_target = list(self._last_joint_command_target)
|
|
||||||
self._last_successful_action_target = final_target
|
|
||||||
cycle.q_target = final_target
|
|
||||||
cycle.action_monotonic_ns = time.monotonic_ns()
|
|
||||||
cycle.command_sent = True
|
|
||||||
self._last_sent_target = sent_target
|
self._last_sent_target = sent_target
|
||||||
self._last_sent_orientation = sent_orientation.copy()
|
self._last_sent_orientation = sent_orientation.copy()
|
||||||
self._last_command_time = now
|
self._last_command_time = now
|
||||||
self._stop_sent = False
|
self._stop_sent = False
|
||||||
else:
|
|
||||||
cycle.send_failed = True
|
|
||||||
total_ms = (time.perf_counter_ns() - tick_started_ns) * 1e-6
|
total_ms = (time.perf_counter_ns() - tick_started_ns) * 1e-6
|
||||||
try:
|
try:
|
||||||
self._record_timing_sample(
|
self._record_timing_sample(
|
||||||
@@ -1309,10 +1196,7 @@ class SingleArmVelocityTeleop(Node):
|
|||||||
self._last_valid_joint_target = list(snapshot.positions)
|
self._last_valid_joint_target = list(snapshot.positions)
|
||||||
return current_pose
|
return current_pose
|
||||||
|
|
||||||
def _solve_joint_target(
|
def _solve_joint_target(self, target_pose: np.ndarray) -> list[float]:
|
||||||
self,
|
|
||||||
target_pose: np.ndarray,
|
|
||||||
) -> tuple[list[float], bool]:
|
|
||||||
if self._last_valid_joint_target is None:
|
if self._last_valid_joint_target is None:
|
||||||
raise RuntimeError("valid joint feedback has not been initialized")
|
raise RuntimeError("valid joint feedback has not been initialized")
|
||||||
try:
|
try:
|
||||||
@@ -1322,9 +1206,9 @@ class SingleArmVelocityTeleop(Node):
|
|||||||
f"{self._arm_name} QP 求解失败，保持上一组关节目标：{exc}",
|
f"{self._arm_name} QP 求解失败，保持上一组关节目标：{exc}",
|
||||||
throttle_duration_sec=1.0,
|
throttle_duration_sec=1.0,
|
||||||
)
|
)
|
||||||
return list(self._last_valid_joint_target), False
|
return list(self._last_valid_joint_target)
|
||||||
self._last_valid_joint_target = list(result)
|
self._last_valid_joint_target = list(result)
|
||||||
return list(result), True
|
return list(result)
|
||||||
|
|
||||||
def _safe_stop(self, reset_active: bool) -> None:
|
def _safe_stop(self, reset_active: bool) -> None:
|
||||||
if not self._stop_sent:
|
if not self._stop_sent:
|
||||||
@@ -1496,122 +1380,6 @@ class SingleArmVelocityTeleop(Node):
|
|||||||
self._cmd_vel_pub.publish(velocity_msg)
|
self._cmd_vel_pub.publish(velocity_msg)
|
||||||
self._target_clamped_pub.publish(clamped_msg)
|
self._target_clamped_pub.publish(clamped_msg)
|
||||||
|
|
||||||
def _build_act_control_sample(
|
|
||||||
self,
|
|
||||||
cycle: _ActCycleContext,
|
|
||||||
) -> ActControlSample:
|
|
||||||
message = ActControlSample()
|
|
||||||
message.header.stamp = self.get_clock().now().to_msg()
|
|
||||||
message.header.frame_id = "rm_base"
|
|
||||||
message.control_seq = cycle.control_seq
|
|
||||||
message.control_monotonic_ns = cycle.control_monotonic_ns
|
|
||||||
message.feedback_monotonic_ns = cycle.feedback_monotonic_ns
|
|
||||||
message.action_monotonic_ns = cycle.action_monotonic_ns
|
|
||||||
message.feedback_age_ms = float(cycle.feedback_age_ms)
|
|
||||||
message.qp_duration_ms = float(cycle.qp_duration_ms)
|
|
||||||
|
|
||||||
q_actual = cycle.q_actual or [0.0] * 7
|
|
||||||
held_target = (
|
|
||||||
cycle.q_target
|
|
||||||
or self._last_successful_action_target
|
|
||||||
or q_actual
|
|
||||||
)
|
|
||||||
qp_target = cycle.q_qp_raw or held_target
|
|
||||||
limits = np.asarray(
|
|
||||||
self._ik_solver.joint_position_limits,
|
|
||||||
dtype=float,
|
|
||||||
)
|
|
||||||
if limits.shape != (7, 2) or not np.isfinite(limits).all():
|
|
||||||
raise ValueError("joint limits must have finite shape (7, 2)")
|
|
||||||
message.q_actual = [float(value) for value in q_actual]
|
|
||||||
message.q_qp_raw = [float(value) for value in qp_target]
|
|
||||||
message.q_target = [float(value) for value in held_target]
|
|
||||||
message.joint_lower_limits = limits[:, 0].tolist()
|
|
||||||
message.joint_upper_limits = limits[:, 1].tolist()
|
|
||||||
|
|
||||||
current_pose = cycle.current_pose
|
|
||||||
if current_pose is None:
|
|
||||||
current_pose = self._debug_pose_fallback()
|
|
||||||
if current_pose is None:
|
|
||||||
current_pose = np.eye(4)
|
|
||||||
raw_target_pose = cycle.raw_target_pose
|
|
||||||
if raw_target_pose is None:
|
|
||||||
raw_target_pose = current_pose
|
|
||||||
target_pose = cycle.target_pose
|
|
||||||
if target_pose is None:
|
|
||||||
target_pose = current_pose
|
|
||||||
message.tcp_current = self._pose_msg(
|
|
||||||
message.header.stamp,
|
|
||||||
current_pose,
|
|
||||||
).pose
|
|
||||||
message.tcp_raw_target = self._pose_msg(
|
|
||||||
message.header.stamp,
|
|
||||||
raw_target_pose,
|
|
||||||
).pose
|
|
||||||
message.tcp_target = self._pose_msg(
|
|
||||||
message.header.stamp,
|
|
||||||
target_pose,
|
|
||||||
).pose
|
|
||||||
velocity = cycle.command_velocity or [0.0] * 6
|
|
||||||
if len(velocity) != 6:
|
|
||||||
raise ValueError("ACT command velocity must contain 6 values")
|
|
||||||
message.tcp_command_velocity.linear.x = float(velocity[0])
|
|
||||||
message.tcp_command_velocity.linear.y = float(velocity[1])
|
|
||||||
message.tcp_command_velocity.linear.z = float(velocity[2])
|
|
||||||
message.tcp_command_velocity.angular.x = float(velocity[3])
|
|
||||||
message.tcp_command_velocity.angular.y = float(velocity[4])
|
|
||||||
message.tcp_command_velocity.angular.z = float(velocity[5])
|
|
||||||
|
|
||||||
controller = self._last_msg
|
|
||||||
if controller is not None:
|
|
||||||
message.pico_pose = controller.pose
|
|
||||||
message.pico_grip = bool(controller.grip)
|
|
||||||
message.pico_trigger = float(controller.trigger)
|
|
||||||
message.pico_primary = bool(controller.primary)
|
|
||||||
message.pico_secondary = bool(controller.secondary)
|
|
||||||
message.pico_axis = [float(value) for value in controller.axis]
|
|
||||||
|
|
||||||
tool_target, tool_state, tool_pending, tool_failed = (
|
|
||||||
self._tool_state_snapshot()
|
|
||||||
)
|
|
||||||
message.gripper_target_open = tool_target
|
|
||||||
message.gripper_state_known = tool_state is not None
|
|
||||||
message.gripper_state_open = bool(tool_state)
|
|
||||||
message.gripper_command_pending = tool_pending
|
|
||||||
message.gripper_command_failed = tool_failed
|
|
||||||
|
|
||||||
message.teleop_active = bool(self._active)
|
|
||||||
message.feedback_valid = cycle.feedback_valid
|
|
||||||
message.action_valid = bool(
|
|
||||||
self._last_successful_action_target is not None
|
|
||||||
and cycle.feedback_valid
|
|
||||||
and not cycle.send_failed
|
|
||||||
and not cycle.control_fault
|
|
||||||
)
|
|
||||||
message.command_sent = cycle.command_sent
|
|
||||||
message.qp_attempted = cycle.qp_attempted
|
|
||||||
message.qp_success = cycle.qp_success
|
|
||||||
message.target_clamped = cycle.target_clamped
|
|
||||||
message.control_fault = bool(
|
|
||||||
cycle.control_fault or self._control_fault_latched
|
|
||||||
)
|
|
||||||
return message
|
|
||||||
|
|
||||||
def _publish_act_control_sample(
|
|
||||||
self,
|
|
||||||
cycle: _ActCycleContext,
|
|
||||||
) -> None:
|
|
||||||
publisher = getattr(self, "_act_sample_pub", None)
|
|
||||||
if publisher is None:
|
|
||||||
return
|
|
||||||
try:
|
|
||||||
publisher.publish(self._build_act_control_sample(cycle))
|
|
||||||
except Exception as exc:
|
|
||||||
self.get_logger().warn(
|
|
||||||
f"{self._arm_name} ACT原子样本发布失败：{exc}",
|
|
||||||
throttle_duration_sec=1.0,
|
|
||||||
)
|
|
||||||
|
|
||||||
@staticmethod
|
@staticmethod
|
||||||
def _pose_msg(stamp, pose: np.ndarray) -> PoseStamped:
|
def _pose_msg(stamp, pose: np.ndarray) -> PoseStamped:
|
||||||
transform = _make_transform(pose[:3, 3], pose[:3, :3])
|
transform = _make_transform(pose[:3, 3], pose[:3, :3])
|
||||||
|
|||||||
Reference in New Issue
Block a user